You can tell me what do you mean by add R's bin directory to path. Thanks
________________________________ From: Uwe Ligges <lig...@statistik.tu-dortmund.de> Cc: David Winsemius <dwinsem...@comcast.net>; "r-help@r-project.org" <r-help@r-project.org> Sent: Thursday, February 23, 2012 9:29 AM Subject: Re: [R] installing the package Rcplex I give up. Uwe Ligges On 23.02.2012 15:01, zheng wei wrote: > Thanks. > > I do not understand item 2, what do you mean by add R's bin directory to path? > > While directly use to c:\temp and type the commands, it says 'R' is not > recognized as an internal or external command. > > While I use previous approach by going into the bin directory and type R CMD > INSTALL "c:/temp/Rcplex", it told me that configuration failed for package > 'Rcplex' > > > ________________________________ > From: Uwe Ligges<lig...@statistik.tu-dortmund.de> > Cc: David Winsemius<dwinsem...@comcast.net>; > "r-help@r-project.org"<r-help@r-project.org> > Sent: Thursday, February 23, 2012 5:07 AM > Subject: Re: [R] installing the package Rcplex > > > > On 22.02.2012 21:04, zheng wei wrote: >> Based on my understanding of the manual, I moved upziped the file and put >> the folder of Rcplex under the directory of c:/temp >> Then I use cmd under windows to go to the director of C:\Program >> Files\R\R-2.13.0\bin, where my R is installed >> and typed R CMD INSTALL >> "c:/temp/Rcplex" > > I'd > > 1. install a recent version of R > > 2. add R's bin directory to the PATH and go to c:\temp and say > > R CMD build Rcplex > > followed by > > R CMD INSTALL Rcplex_version.tar.gz > > > 3. When it fails, I'd try to find out if the ERROR message is helpful. > > 4. If 3 fails, I'd ask the maintainer for help - including relevant > information, like the error message, install paths, version information etc. > > > Uwe Ligges > > > >> I got the error of configuration failed for package "Rcplex" >> >> Any idea? >> >> >> >> >> ________________________________ >> From: Uwe Ligges<lig...@statistik.tu-dortmund.de> >> Cc: David Winsemius<dwinsem...@comcast.net>; >> "r-help@r-project.org"<r-help@r-project.org> >> Sent: Wednesday, February 22, 2012 4:04 AM >> Subject: Re: [R] installing the package Rcplex >> >> >> >> On 22.02.2012 03:33, zheng wei wrote: >>> Thanks. >>> >>> I was just reminded by the tech support in my university that cplex is an >>> independent software owned by ILOG, which in turn is now owned by IBM. I >>> suceeded in installing the software cplex under the directory of >>> "C:/Program Files/IBM/ILOG/CPLEX_Studio_Academic124/cplex" >>> I guess Rcplex is an R package to utilize the software cplex. I have >>> changed the path "/c/ilog/cplex111" to the above path. My question is how >>> to finally and effectively install the package of Rcplex? >> >> You have been asked alreeady to read the R Installation and >> Administration manual. >> >> Uwe Ligges >> >> >> >>> >>> Thanks, >>> Wei >>> >>> >>> >>> ________________________________ >>> From: Uwe Ligges<lig...@statistik.tu-dortmund.de> >>> Cc: David Winsemius<dwinsem...@comcast.net>; >>> "r-help@r-project.org"<r-help@r-project.org> >>> Sent: Tuesday, February 21, 2012 2:14 PM >>> Subject: Re: [R] installing the package Rcplex >>> >>> >>> >>> On 21.02.2012 19:57, zheng wei wrote: >>>> Thank you both for helping. Still could not figure out. >>>> >>>> I was contacting different supporting IT departments in my university but >>>> did not get any help. >>>> >>>> For the moment, I just want to what does the instruction of the package >>>> means. You could find this instruction on page >>>> http://cran.r-project.org/web/packages/Rcplex/INSTALL >>>> >>>>-------------------------------------------------------------------------------------------------- >>>> ***WINDOWS*** >>>> Installation on Windows systems is done by using the provided >>>> Makevars.win file in the src directory. It contains the following >>>> lines: >>>> PKG_CPPFLAGS=-I<CPLEX_DIR>/include >>>> PKG_LIBS=-L<CPLEX_DIR>/lib/x86_windows_vs2008/stat_mda -lcplex111 -lm >>>> where<cplex_dir> is the cplex installation directory >>>> e.g. /c/ilog/cplex111. Please edit your Makevars.win file accordingly. >>>> We have successfully tested this procedure with CPLEX 11.1 on 32-bit >>>> Windows XP. >>>> -------------------------------------------------------------------------------------------------- >>>> >>>> >>>> I can find the file and see the codes. But what new path should I put, and >>>> what to do next? >>> >>> The path to your CPLEX installation? >>> >>> Uwe Ligges >>> >>> >>> >>> >>>> >>>> Thanks, >>>> Wei >>>> >>>> >>>> ________________________________ >>>> From: Uwe Ligges<lig...@statistik.tu-dortmund.de> >>>> To: David Winsemius<dwinsem...@comcast.net> -project.org> >>>> Sent: Monday, February 20, 2012 6:01 AM >>>> Subject: Re: [R] installing the package Rcplex >>>> >>>> >>>> >>>> On 20.02.2012 01:54, David Winsemius wrote: >>>>> >>>>> On Feb 19, 2012, at 7:45 PM, zheng wei wrote: >>>>> >>>>>> I did not know this before. I installed it as you suggested. what to >>>>>> do next? >>>>> >>>>> Read the Installation Manual? >>>>> >>>> >>>> And don't forget this is a source package for which no CRAN Windows >>>> binary exists, hence it may be not that straightforward to get it done >>>> and you wil have to read the INSTALL file from the source package >>>> carefully. >>>> >>>> Uwe Ligges [[alternative HTML version deleted]]
______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
