Thanks. I do not understand item 2, what do you mean by add R's bin directory to path? While directly use to c:\temp and type the commands, it says 'R' is not recognized as an internal or external command. While I use previous approach by going into the bin directory and type R CMD INSTALL "c:/temp/Rcplex", it told me that configuration failed for package 'Rcplex'
________________________________ From: Uwe Ligges <lig...@statistik.tu-dortmund.de> Cc: David Winsemius <dwinsem...@comcast.net>; "r-help@r-project.org" <r-help@r-project.org> Sent: Thursday, February 23, 2012 5:07 AM Subject: Re: [R] installing the package Rcplex On 22.02.2012 21:04, zheng wei wrote: > Based on my understanding of the manual, I moved upziped the file and put the > folder of Rcplex under the directory of c:/temp > Then I use cmd under windows to go to the director of C:\Program > Files\R\R-2.13.0\bin, where my R is installed > and typed R CMD INSTALL > "c:/temp/Rcplex" I'd 1. install a recent version of R 2. add R's bin directory to the PATH and go to c:\temp and say R CMD build Rcplex followed by R CMD INSTALL Rcplex_version.tar.gz 3. When it fails, I'd try to find out if the ERROR message is helpful. 4. If 3 fails, I'd ask the maintainer for help - including relevant information, like the error message, install paths, version information etc. Uwe Ligges > I got the error of configuration failed for package "Rcplex" > > Any idea? > > > > > ________________________________ > From: Uwe Ligges<lig...@statistik.tu-dortmund.de> > Cc: David Winsemius<dwinsem...@comcast.net>; > "r-help@r-project.org"<r-help@r-project.org> > Sent: Wednesday, February 22, 2012 4:04 AM > Subject: Re: [R] installing the package Rcplex > > > > On 22.02.2012 03:33, zheng wei wrote: >> Thanks. >> >> I was just reminded by the tech support in my university that cplex is an >> independent software owned by ILOG, which in turn is now owned by IBM. I >> suceeded in installing the software cplex under the directory of "C:/Program >> Files/IBM/ILOG/CPLEX_Studio_Academic124/cplex" >> I guess Rcplex is an R package to utilize the software cplex. I have changed >> the path "/c/ilog/cplex111" to the above path. My question is how to finally >> and effectively install the package of Rcplex? > > You have been asked alreeady to read the R Installation and > Administration manual. > > Uwe Ligges > > > >> >> Thanks, >> Wei >> >> >> >> ________________________________ >> From: Uwe Ligges<lig...@statistik.tu-dortmund.de> >> Cc: David Winsemius<dwinsem...@comcast.net>; >> "r-help@r-project.org"<r-help@r-project.org> >> Sent: Tuesday, February 21, 2012 2:14 PM >> Subject: Re: [R] installing the package Rcplex >> >> >> >> On 21.02.2012 19:57, zheng wei wrote: >>> Thank you both for helping. Still could not figure out. >>> >>> I was contacting different supporting IT departments in my university but >>> did not get any help. >>> >>> For the moment, I just want to what does the instruction of the package >>> means. You could find this instruction on page >>> http://cran.r-project.org/web/packages/Rcplex/INSTALL >>> >>>-------------------------------------------------------------------------------------------------- >>> ***WINDOWS*** >>> Installation on Windows systems is done by using the provided >>> Makevars.win file in the src directory. It contains the following >>> lines: >>> PKG_CPPFLAGS=-I<CPLEX_DIR>/include >>> PKG_LIBS=-L<CPLEX_DIR>/lib/x86_windows_vs2008/stat_mda -lcplex111 -lm >>> where<cplex_dir> is the cplex installation directory >>> e.g. /c/ilog/cplex111. Please edit your Makevars.win file accordingly. >>> We have successfully tested this procedure with CPLEX 11.1 on 32-bit >>> Windows XP. >>> -------------------------------------------------------------------------------------------------- >>> >>> >>> I can find the file and see the codes. But what new path should I put, and >>> what to do next? >> >> The path to your CPLEX installation? >> >> Uwe Ligges >> >> >> >> >>> >>> Thanks, >>> Wei >>> >>> >>> ________________________________ >>> From: Uwe Ligges<lig...@statistik.tu-dortmund.de> >>> To: David Winsemius<dwinsem...@comcast.net> project.org> >>> Sent: Monday, February 20, 2012 6:01 AM >>> Subject: Re: [R] installing the package Rcplex >>> >>> >>> >>> On 20.02.2012 01:54, David Winsemius wrote: >>>> >>>> On Feb 19, 2012, at 7:45 PM, zheng wei wrote: >>>> >>>>> I did not know this before. I installed it as you suggested. what to >>>>> do next? >>>> >>>> Read the Installation Manual? >>>> >>> >>> And don't forget this is a source package for which no CRAN Windows >>> binary exists, hence it may be not that straightforward to get it done >>> and you wil have to read the INSTALL file from the source package carefully. >>> >>> Uwe Ligges [[alternative HTML version deleted]]
______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.