> On Jun 18, 2022, at 3:05 AM, Samuel Thibault <samuel.thiba...@gnu.org> wrote:
>
> Peter Delevoryas, le mer. 15 juin 2022 18:05:26 -0700, a ecrit:
>> With this change, you can now request the out-of-band MAC address from
>> slirp in fby35-bmc:
>>
>> wget
>> https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
>> qemu-system-arm -machine fby35-bmc \
>> -drive file=fby35.mtd,format=raw,if=mtd \
>> -nographic \
>> -netdev
>> user,id=nic,mfr-id=0x8119,oob-eth-addr=de:ad:be:ef:ca:fe,hostfwd=::2222-:22 \
>> -net nic,model=ftgmac100,netdev=nic
>>
>> ...
>> username: root
>> password: 0penBmc
>> ...
>>
>> root@bmc-oob:~# ncsi-util -n eth0 -c 0 0x50 0 0 0x81 0x19 0 0 0x1b 0
>> NC-SI Command Response:
>> cmd: NCSI_OEM_CMD(0x50)
>> Response: COMMAND_COMPLETED(0x0000) Reason: NO_ERROR(0x0000)
>> Payload length = 24
>>
>> 20: 0x00 0x00 0x81 0x19
>> 24: 0x01 0x00 0x1b 0x00
>> 28: 0x00 0x00 0x00 0x00
>> 32: 0xde 0xad 0xbe 0xef
>> 36: 0xca 0xfe 0x00 0x00
>>
>> root@bmc-oob:~# ifconfig
>> eth0 Link encap:Ethernet HWaddr DE:AD:BE:EF:CA:FE
>> inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
>> inet6 addr: fec0::dcad:beff:feef:cafe/64 Scope:Site
>> inet6 addr: fe80::dcad:beff:feef:cafe/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:253 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:271 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:24638 (24.0 KiB) TX bytes:18876 (18.4 KiB)
>> Interrupt:32
>>
>> lo Link encap:Local Loopback
>> inet addr:127.0.0.1 Mask:255.0.0.0
>> inet6 addr: ::1/128 Scope:Host
>> UP LOOPBACK RUNNING MTU:65536 Metric:1
>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:120 (120.0 B) TX bytes:120 (120.0 B)
>>
>> Signed-off-by: Peter Delevoryas <p...@fb.com>
>> ---
>> net/slirp.c | 13 +++++++++++--
>> qapi/net.json | 5 ++++-
>> 2 files changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/net/slirp.c b/net/slirp.c
>> index 231068c1e2..858d3da859 100644
>> --- a/net/slirp.c
>> +++ b/net/slirp.c
>> @@ -414,7 +414,7 @@ static int net_slirp_init(NetClientState *peer, const
>> char *model,
>> const char *smb_export, const char *vsmbserver,
>> const char **dnssearch, const char *vdomainname,
>> const char *tftp_server_name, uint32_t mfr_id,
>> - Error **errp)
>> + uint8_t oob_eth_addr[ETH_ALEN], Error **errp)
>> {
>> /* default settings according to historic slirp */
>> struct in_addr net = { .s_addr = htonl(0x0a000200) }; /* 10.0.2.0 */
>> @@ -637,6 +637,7 @@ static int net_slirp_init(NetClientState *peer, const
>> char *model,
>> cfg.vdnssearch = dnssearch;
>> cfg.vdomainname = vdomainname;
>> cfg.mfr_id = mfr_id;
>> + memcpy(cfg.oob_eth_addr, oob_eth_addr, ETH_ALEN);
>
> And similarly here.
Copy that, thanks again for the review comments!
>
>> s->slirp = slirp_new(&cfg, &slirp_cb, s);
>> QTAILQ_INSERT_TAIL(&slirp_stacks, s, entry);
>>
>> @@ -1142,6 +1143,7 @@ int net_init_slirp(const Netdev *netdev, const char
>> *name,
>> const NetdevUserOptions *user;
>> const char **dnssearch;
>> bool ipv4 = true, ipv6 = true;
>> + MACAddr oob_eth_addr = {};
>>
>> assert(netdev->type == NET_CLIENT_DRIVER_USER);
>> user = &netdev->u.user;
>> @@ -1166,6 +1168,12 @@ int net_init_slirp(const Netdev *netdev, const char
>> *name,
>> net_init_slirp_configs(user->hostfwd, SLIRP_CFG_HOSTFWD);
>> net_init_slirp_configs(user->guestfwd, 0);
>>
>> + if (user->has_oob_eth_addr &&
>> + net_parse_macaddr(oob_eth_addr.a, user->oob_eth_addr) < 0) {
>> + error_setg(errp, "invalid syntax for OOB ethernet address");
>> + return -1;
>> + }
>> +
>> ret = net_slirp_init(peer, "user", name, user->q_restrict,
>> ipv4, vnet, user->host,
>> ipv6, user->ipv6_prefix, user->ipv6_prefixlen,
>> @@ -1173,7 +1181,8 @@ int net_init_slirp(const Netdev *netdev, const char
>> *name,
>> user->bootfile, user->dhcpstart,
>> user->dns, user->ipv6_dns, user->smb,
>> user->smbserver, dnssearch, user->domainname,
>> - user->tftp_server_name, user->mfr_id, errp);
>> + user->tftp_server_name, user->mfr_id,
>> oob_eth_addr.a,
>> + errp);
>>
>> while (slirp_configs) {
>> config = slirp_configs;
>> diff --git a/qapi/net.json b/qapi/net.json
>> index efc5cb3fb6..7b2c3c205c 100644
>> --- a/qapi/net.json
>> +++ b/qapi/net.json
>> @@ -169,6 +169,8 @@
>> #
>> # @mfr-id: Manufacturer ID (Private Enterprise Number: IANA)
>> #
>> +# @oob-eth-addr: Out-of-band ethernet address for BMC
>> +#
>> # Since: 1.2
>> ##
>> { 'struct': 'NetdevUserOptions',
>> @@ -195,7 +197,8 @@
>> '*hostfwd': ['String'],
>> '*guestfwd': ['String'],
>> '*tftp-server-name': 'str',
>> - '*mfr-id': 'uint32' } }
>> + '*mfr-id': 'uint32',
>> + '*oob-eth-addr': 'str' } }
>>
>> ##
>> # @NetdevTapOptions:
>> --
>> 2.30.2
>>
>
> --
> Samuel
> ---
> Pour une évaluation indépendante, transparente et rigoureuse !
> Je soutiens la Commission d'Évaluation de l'Inria.
