[PATCH v2 4/4] hw/usb/vt82c686-uhci-pci: Use ISA instead of PCI interrupts

[BALATON Zoltan]

This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Implement this in a vt82c686-uhci-pci specific irq handler
Using via_isa_set_irq().

Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.y...@flygoat.com>
Reviewed-by: Gerd Hoffmann <kra...@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
---
 hw/usb/vt82c686-uhci-pci.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/hw/usb/vt82c686-uhci-pci.c b/hw/usb/vt82c686-uhci-pci.c
index ea262e6d70..0bf2b72ff0 100644
--- a/hw/usb/vt82c686-uhci-pci.c
+++ b/hw/usb/vt82c686-uhci-pci.c
@@ -1,6 +1,17 @@
 #include "qemu/osdep.h"
+#include "hw/irq.h"
+#include "hw/isa/vt82c686.h"
 #include "hcd-uhci.h"
 
+static void uhci_isa_set_irq(void *opaque, int irq_num, int level)
+{
+    UHCIState *s = opaque;
+    uint8_t irq = pci_get_byte(s->dev.config + PCI_INTERRUPT_LINE);
+    if (irq > 0 && irq < 15) {
+        via_isa_set_irq(pci_get_function_0(&s->dev), irq, level);
+    }
+}
+
 static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp)
 {
     UHCIState *s = UHCI(dev);
@@ -14,6 +25,8 @@ static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error 
**errp)
     pci_set_long(pci_conf + 0xc0, 0x00002000);
 
     usb_uhci_common_realize(dev, errp);
+    object_unref(s->irq);
+    s->irq = qemu_allocate_irq(uhci_isa_set_irq, s, 0);
 }
 
 static UHCIInfo uhci_info[] = {
-- 
2.21.4