This patch set contains a few bug fixes and I2C devices for some NPCM7XX boards.
Patch 1~2 fix a problem that causes the SMBus module to behave incorrectly when it's in FIFO mode and trying to receive more than 16 bytes at a time. Patch 3 fixes a error in a register for ADC module. Patch 4 makes the ADC input to be R/W instead of write only. It allows a test system to read these via QMP and has no negative effect. Patch 5 modifies at24c_eeprom_init in NPCM7xx boards so that it can fit more use cases. Patch 6 uses the function defined in patch 5 to add the EEPROM and other I2C devices for Quanta GBS board. Patch 7 adds an ID for SMBus devices in NPCM7xx boards. This allows us to add device to these buses using "-device" parameter. -- Changes since v1: 1. Rewrote patch 5 to implement the function in NPCM7xx board file instead of the EEPROM device file. 2. Slightly modify patch 6 to adapt to the changes and QEMU comment style. 3. Squash patch 7 into patch 5 to make it compile. 4. Add a new patch 7. Hao Wu (6): hw/i2c: Clear ACK bit in NPCM7xx SMBus module hw/i2c: Read FIFO during RXF_CTL change in NPCM7XX SMBus hw/adc: Fix CONV bit in NPCM7XX ADC CON register hw/adc: Make adci[*] R/W in NPCM7XX ADC hw/nvram: Update at24c EEPROM init function in NPCM7xx boards hw/arm: Add ID for NPCM7XX SMBus Patrick Venture (1): hw/arm: quanta-gbs-bmc add i2c devices hw/adc/npcm7xx_adc.c | 4 +- hw/arm/npcm7xx.c | 1 + hw/arm/npcm7xx_boards.c | 97 +++++++++++++++++++++------------- hw/i2c/npcm7xx_smbus.c | 8 +-- tests/qtest/npcm7xx_adc-test.c | 2 +- 5 files changed, 67 insertions(+), 45 deletions(-) -- 2.33.0.1079.g6e70778dc9-goog
