The fp5280g2-bmc is supported by OpenBMC, It's based on the following device tree
https://github.com/openbmc/linux/blob/dev-5.10/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts Signed-off-by: John Wang <wangzhiqian...@inspur.com> --- hw/arm/aspeed.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 01c1747972..3587788f63 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -141,6 +141,21 @@ struct AspeedMachineState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* FP5280G2 hardware value: 0XF100D286 */ +#define FP5280G2_BMC_HW_STRAP1 ( \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_RESERVED28 | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_HW_STRAP_VGA_CLASS_CODE | \ + SCU_HW_STRAP_LPC_RESET_PIN | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ + SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ + SCU_HW_STRAP_MAC1_RGMII | \ + SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ + SCU_AST2500_HW_STRAP_RESERVED1) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -717,6 +732,17 @@ static void g220a_bmc_i2c_init(AspeedMachineState *bmc) eeprom_buf); } +static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */ + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, + 0x48); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, + 0x49); +} + static void rainier_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -1082,6 +1108,24 @@ static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) aspeed_soc_num_cpus(amc->soc_name); }; +static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Inspur FP5280G2 BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1; + amc->fmc_model = "n25q512a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; + amc->i2c_init = fp5280g2_bmc_i2c_init; + mc->default_ram_size = 512 * MiB; + mc->default_cpus = mc->min_cpus = mc->max_cpus = + aspeed_soc_num_cpus(amc->soc_name); +}; + static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -1146,6 +1190,10 @@ static const TypeInfo aspeed_machine_types[] = { .name = MACHINE_TYPE_NAME("g220a-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_g220a_class_init, + }, { + .name = MACHINE_TYPE_NAME("fp5280g2-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_fp5280g2_class_init, }, { .name = MACHINE_TYPE_NAME("quanta-q71l-bmc"), .parent = TYPE_ASPEED_MACHINE, -- 2.30.2
