Adding Peter Maydell and Joel.
On 9/1/21 1:31 AM, p...@fb.com wrote:
> From: Peter Delevoryas <p...@fb.com>
>
> When you run QEMU with an Aspeed machine and a single serial device
> using stdio like this:
>
> qemu -machine ast2600-evb -drive ... -serial stdio
>
> The guest OS can read and write to the UART5 registers at 0x1E784000 and
> it will receive from stdin and write to stdout. The Aspeed SoC's have a
> lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on
> the board design, may be using any of them as the serial console. (See
> "stdout-path" in a DTS to check which one is chosen).
>
> Most boards, including all of those currently defined in
> hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds
> some flexibility for different boards without requiring users to change
> their command-line invocation of QEMU.
>
> I tested this doesn't break existing code by booting an AST2500 OpenBMC
> image and an AST2600 OpenBMC image, each using UART5 as the console.
>
> Then I tested switching the default to UART1 and booting an AST2600
> OpenBMC image that uses UART1, and that worked too.
>
> Signed-off-by: Peter Delevoryas <p...@fb.com>
Some comments below,
> ---
> hw/arm/aspeed.c | 1 +
> hw/arm/aspeed_ast2600.c | 11 +++++++----
> hw/arm/aspeed_soc.c | 9 ++++++---
> include/hw/arm/aspeed.h | 1 +
> 4 files changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 9d43e26c51..74379907ff 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -804,6 +804,7 @@ static void aspeed_machine_class_init(ObjectClass *oc,
> void *data)
> mc->no_parallel = 1;
> mc->default_ram_id = "ram";
> amc->macs_mask = ASPEED_MAC0_ON;
> + amc->serial_hd0 = ASPEED_DEV_UART5;
>
> aspeed_machine_class_props_init(oc);
> }
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index e3013128c6..361a456214 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -10,6 +10,7 @@
> #include "qemu/osdep.h"
> #include "qapi/error.h"
> #include "hw/misc/unimp.h"
> +#include "hw/arm/aspeed.h"
> #include "hw/arm/aspeed_soc.h"
> #include "hw/char/serial.h"
> #include "qemu/module.h"
> @@ -231,6 +232,8 @@ static uint64_t aspeed_calc_affinity(int cpu)
> static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
> {
> int i;
> + AspeedMachineState *bmc = ASPEED_MACHINE(qdev_get_machine());
> + AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
This is reaching into the machine from the SoC which is not good
practice.
What you should do is add an attribute in AspeedSoCState and a
property in aspeed_soc_properties[]. This property would be set
in aspeed_machine_init() before realizing the soc object. Look
at "dram" for an example.
Then, in the aspeed_soc_*_realize routines, you would use the
attribute to initialize the default serial device.
I don't really know what to call this attribute and property.
How about uart_default and "uart-default" ?
Thanks,
C.
> AspeedSoCState *s = ASPEED_SOC(dev);
> AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
> Error *err = NULL;
> @@ -322,10 +325,10 @@ static void aspeed_soc_ast2600_realize(DeviceState
> *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
> }
>
> - /* UART - attach an 8250 to the IO space as our UART5 */
> - serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
> - aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
> - 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
> + /* Wire up the first serial device, usually either UART5 or UART1 */
> + serial_mm_init(get_system_memory(), sc->memmap[amc->serial_hd0], 2,
> + aspeed_soc_get_irq(s, amc->serial_hd0), 38400,
> + serial_hd(0), DEVICE_LITTLE_ENDIAN);
>
> /* I2C */
> object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
> diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
> index 3ad6c56fa9..77422bbeb1 100644
> --- a/hw/arm/aspeed_soc.c
> +++ b/hw/arm/aspeed_soc.c
> @@ -13,6 +13,7 @@
> #include "qemu/osdep.h"
> #include "qapi/error.h"
> #include "hw/misc/unimp.h"
> +#include "hw/arm/aspeed.h"
> #include "hw/arm/aspeed_soc.h"
> #include "hw/char/serial.h"
> #include "qemu/module.h"
> @@ -221,6 +222,8 @@ static void aspeed_soc_init(Object *obj)
> static void aspeed_soc_realize(DeviceState *dev, Error **errp)
> {
> int i;
> + AspeedMachineState *bmc = ASPEED_MACHINE(qdev_get_machine());
> + AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
> AspeedSoCState *s = ASPEED_SOC(dev);
> AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
> Error *err = NULL;
> @@ -287,9 +290,9 @@ static void aspeed_soc_realize(DeviceState *dev, Error
> **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
> }
>
> - /* UART - attach an 8250 to the IO space as our UART5 */
> - serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
> - aspeed_soc_get_irq(s, ASPEED_DEV_UART5), 38400,
> + /* Wire up the first serial device, usually either UART5 or UART1 */
> + serial_mm_init(get_system_memory(), sc->memmap[amc->serial_hd0], 2,
> + aspeed_soc_get_irq(s, amc->serial_hd0), 38400,
> serial_hd(0), DEVICE_LITTLE_ENDIAN);
>
> /* I2C */
> diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
> index c9747b15fc..bc0f27885a 100644
> --- a/include/hw/arm/aspeed.h
> +++ b/include/hw/arm/aspeed.h
> @@ -38,6 +38,7 @@ struct AspeedMachineClass {
> uint32_t num_cs;
> uint32_t macs_mask;
> void (*i2c_init)(AspeedMachineState *bmc);
> + uint32_t serial_hd0;
> };
>
>
>
