With this prefix, no existing command or workflow should be affected.
While rewriting the descriptions, also remove the line "Use zero to make
the password stay valid forever." from 'set_password', I believe this was
intended for 'expire_password', but would even be wrong there.
Signed-off-by: Stefan Reiter <s.rei...@proxmox.com>
---
hmp-commands.hx | 28 +++++++++++++++-------------
monitor/hmp-cmds.c | 20 ++++++++++++++++++--
monitor/qmp-cmds.c | 9 +++++----
qapi/ui.json | 12 ++++++++++--
4 files changed, 48 insertions(+), 21 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index e01ca13ca8..0b5abcfb8a 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1541,34 +1541,36 @@ ERST
{
.name = "set_password",
- .args_type = "protocol:s,password:s,connected:s?",
- .params = "protocol password action-if-connected",
+ .args_type = "protocol:s,password:s,display:s?,connected:s?",
+ .params = "protocol password [id=display]
[action-if-connected]",
.help = "set spice/vnc password",
.cmd = hmp_set_password,
},
SRST
-``set_password [ vnc | spice ] password [ action-if-connected ]``
- Change spice/vnc password. Use zero to make the password stay valid
- forever. *action-if-connected* specifies what should happen in
+``set_password [ vnc | spice ] password [ id=display ] [
action-if-connected ]``
+ Change spice/vnc password. *display* (must be prefixed with
+ 'id=') can be used with 'vnc' to specify which display to set the
+ password on. *action-if-connected* specifies what should happen in
case a connection is established: *fail* makes the password change
- fail. *disconnect* changes the password and disconnects the
- client. *keep* changes the password and keeps the connection up.
- *keep* is the default.
+ fail. *disconnect* changes the password and disconnects the client.
+ *keep* changes the password and keeps the connection up. *keep* is
+ the default.
ERST
{
.name = "expire_password",
- .args_type = "protocol:s,time:s",
- .params = "protocol time",
+ .args_type = "protocol:s,time:s,display:s?",
+ .params = "protocol time [id=display]",
.help = "set spice/vnc password expire-time",
.cmd = hmp_expire_password,
},
SRST
-``expire_password [ vnc | spice ]`` *expire-time*
- Specify when a password for spice/vnc becomes
- invalid. *expire-time* accepts:
+``expire_password [ vnc | spice ] expire-time [ id=display ]``
+ Specify when a password for spice/vnc becomes invalid.
+ *display* behaves the same as in ``set_password``.
+ *expire-time* accepts:
``now``
Invalidate password instantly.
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index 31366e6331..30f5b2c3e3 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -1546,10 +1546,20 @@ void hmp_set_password(Monitor *mon, const QDict
*qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *password = qdict_get_str(qdict, "password");
+ const char *display = qdict_get_try_str(qdict, "display");
const char *connected = qdict_get_try_str(qdict, "connected");
Error *err = NULL;
- qmp_set_password(protocol, password, !!connected, connected, &err);
+ if (display && strncmp(display, "id=", 3)) {
+ connected = display;
+ display = NULL;
+ } else if (display) {
+ /* skip "id=" */
+ display = display + 3;
+ }
+
+ qmp_set_password(protocol, password, !!connected, connected,
!!display,
+ display, &err);
hmp_handle_error(mon, err);
}
@@ -1557,9 +1567,15 @@ void hmp_expire_password(Monitor *mon, const QDict
*qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *whenstr = qdict_get_str(qdict, "time");
+ const char *display = qdict_get_try_str(qdict, "display");
Error *err = NULL;
- qmp_expire_password(protocol, whenstr, &err);
+ if (display && !strncmp(display, "id=", 3)) {
+ /* skip "id=" */
+ display = display + 3;
+ }
+
+ qmp_expire_password(protocol, whenstr, !!display, display, &err);
hmp_handle_error(mon, err);
}
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index f7d64a6457..a9ded90a41 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -165,7 +165,8 @@ void qmp_system_wakeup(Error **errp)
}
void qmp_set_password(const char *protocol, const char *password,
- bool has_connected, const char *connected, Error
**errp)
+ bool has_connected, const char *connected,
+ bool has_display, const char *display, Error **errp)
{
int disconnect_if_connected = 0;
int fail_if_connected = 0;
@@ -198,7 +199,7 @@ void qmp_set_password(const char *protocol, const char
*password,
}
/* Note that setting an empty password will not disable login
through
* this interface. */
- rc = vnc_display_password(NULL, password);
+ rc = vnc_display_password(has_display ? display : NULL, password);
} else {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
"'vnc' or 'spice'");
@@ -211,7 +212,7 @@ void qmp_set_password(const char *protocol, const char
*password,
}
void qmp_expire_password(const char *protocol, const char *whenstr,
- Error **errp)
+ bool has_display, const char *display, Error
**errp)
{
time_t when;
int rc;
@@ -232,7 +233,7 @@ void qmp_expire_password(const char *protocol, const
char *whenstr,
}
rc = qemu_spice.set_pw_expire(when);
} else if (strcmp(protocol, "vnc") == 0) {
- rc = vnc_display_pw_expire(NULL, when);
+ rc = vnc_display_pw_expire(has_display ? display : NULL, when);
} else {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
"'vnc' or 'spice'");
diff --git a/qapi/ui.json b/qapi/ui.json
index 16bf03224f..24dca811f8 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -25,6 +25,9 @@
# 'disconnect' to disconnect existing clients
# 'keep' to maintain existing clients
#
+# @display: In case of VNC, the id of the display where the password
+# should be changed. Defaults to the first.
+#
# Returns: - Nothing on success
# - If Spice is not enabled, DeviceNotFound
#
@@ -38,7 +41,8 @@
#
##
{ 'command': 'set_password',
- 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
+ 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str',
+ '*display': 'str'} }
##
# @expire_password:
@@ -54,6 +58,9 @@
# - '+INT' where INT is the number of seconds from now (integer)
# - 'INT' where INT is the absolute time in seconds
#
+# @display: In case of VNC, the id of the display where the password
+# should be set to expire. Defaults to the first.
+#
# Returns: - Nothing on success
# - If @protocol is 'spice' and Spice is not active,
DeviceNotFound
#
@@ -71,7 +78,8 @@
# <- { "return": {} }
#
##
-{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time':
'str'} }
+{ 'command': 'expire_password',
+ 'data': {'protocol': 'str', 'time': 'str', '*display': 'str'} }
##
# @screendump:
--
2.30.2
