This patch set contains a few bug fixes and I2C devices for some NPCM7XX boards.
Patch 1~2 fix a problem that causes the SMBus module to behave incorrectly when it's in FIFO mode and trying to receive more than 16 bytes at a time. Patch 3 fixes a error in a register for ADC module. Patch 4 makes the ADC input to be R/W instead of write only. It allows a test system to read these via QMP and has no negative effect. Patch 5 adds a new aux function for at24c EEPROM. It allows us to attach a drive to an at24c EEPROM device that is used as the initialized content of that device. Patch 6 uses the function defined in patch 5 to add the EEPROM and other I2C devices for Quanta GBS board. Patch 7 modifies the Quanta GSJ board to use the new function defined in patch 5. Hao Wu (6): hw/i2c: Clear ACK bit in NPCM7xx SMBus module hw/i2c: Read FIFO during RXF_CTL change in NPCM7XX SMBus hw/adc: Fix CONV bit in NPCM7XX ADC CON register hw/adc: Make adci[*] R/W in NPCM7XX ADC hw/nvram: Add a new auxiliary function to init at24c eeprom hw/arm: Use unit number in quanta-gsj eeprom files Patrick Venture (1): hw/arm: quanta-gbs-bmc add i2c devices hw/adc/npcm7xx_adc.c | 4 +- hw/arm/npcm7xx_boards.c | 94 ++++++++++++++++----------------- hw/i2c/npcm7xx_smbus.c | 8 +-- hw/nvram/eeprom_at24c.c | 18 +++++++ include/hw/nvram/eeprom_at24c.h | 13 +++++ tests/qtest/npcm7xx_adc-test.c | 2 +- 6 files changed, 85 insertions(+), 54 deletions(-) create mode 100644 include/hw/nvram/eeprom_at24c.h -- 2.33.0.rc1.237.g0d66db33f3-goog
