Recently we added support of zstd to qcow2 format, as zstd seems to be
better than zlib in general, and which is important (as qcow2
compression used mostly for backups) compressed writes are faster with
zstd.
Let's add a build option to use zstd by default.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsement...@virtuozzo.com>
---
Hi all! We want to use zstd as a default compression type for newly
created qcow2 images in upcoming Virtuozzo 8.
I am not sure, how much the community interested in such option,
probably I should just keep a downstream-only patch changing the
default.
But if you like it, I'd be happy to only set new config option in our
qemu build instead of maintaining extra downstream-only patch :)
So, it's an RFC. I also can split the patch so that refactoring of
qcow2_co_create() go in a separate preparation patch.
Another RFC question, shouldn't we move to zstd by default in upstream
too?
configure | 10 +++++++++-
meson.build | 4 ++++
block/qcow2.c | 32 +++++++++++++++++++++++++-------
meson_options.txt | 2 ++
4 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/configure b/configure
index debd50c085..b19af43525 100755
--- a/configure
+++ b/configure
@@ -385,6 +385,7 @@ snappy="auto"
bzip2="auto"
lzfse="auto"
zstd="auto"
+qcow2_zstd_default="no"
guest_agent="$default_feature"
guest_agent_with_vss="no"
guest_agent_ntddscsi="no"
@@ -1318,6 +1319,10 @@ for opt do
;;
--enable-zstd) zstd="enabled"
;;
+ --disable-qcow2-zstd-default) qcow2_zstd_default="disabled"
+ ;;
+ --enable-qcow2-zstd-default) qcow2_zstd_default="enabled"
+ ;;
--enable-guest-agent) guest_agent="yes"
;;
--disable-guest-agent) guest_agent="no"
@@ -1903,6 +1908,8 @@ disabled with --disable-FEATURE, default is enabled if
available
(for reading lzfse-compressed dmg images)
zstd support for zstd compression library
(for migration compression and qcow2 cluster compression)
+ qcow2-zstd-default Use zstd by default for qcow2 image creation
+ (requires zstd enabled)
seccomp seccomp support
coroutine-pool coroutine freelist (better performance)
glusterfs GlusterFS backend
@@ -6424,7 +6431,8 @@ if test "$skip_meson" = no; then
-Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2
-Dlibiscsi=$libiscsi \
-Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
-Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse \
- -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+ -Dzstd=$zstd -Dqcow2_zstd_default=$qcow2_zstd_default \
+ -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
-Dattr=$attr -Ddefault_devices=$default_devices \
-Ddocs=$docs -Dsphinx_build=$sphinx_build -Dinstall_blobs=$blobs \
-Dvhost_user_blk_server=$vhost_user_blk_server
-Dmultiprocess=$multiprocess \
diff --git a/meson.build b/meson.build
index d8a92666fb..3d65b6c46b 100644
--- a/meson.build
+++ b/meson.build
@@ -484,6 +484,9 @@ if not get_option('zstd').auto() or have_block
required: get_option('zstd'),
method: 'pkg-config', kwargs: static_kwargs)
endif
+if not zstd.found() and get_option('qcow2_zstd_default').enabled()
+ error('--enable-qcow2-zstd-default: Cannot use zstd by default without
enabling zstd')
+endif
gbm = not_found
if 'CONFIG_GBM' in config_host
gbm = declare_dependency(compile_args: config_host['GBM_CFLAGS'].split(),
@@ -1168,6 +1171,7 @@ config_host_data.set('CONFIG_GETTID', has_gettid)
config_host_data.set('CONFIG_MALLOC_TRIM', has_malloc_trim)
config_host_data.set('CONFIG_STATX', has_statx)
config_host_data.set('CONFIG_ZSTD', zstd.found())
+config_host_data.set('CONFIG_QCOW2_ZSTD_DEFAULT',
get_option('qcow2_zstd_default').enabled())
config_host_data.set('CONFIG_FUSE', fuse.found())
config_host_data.set('CONFIG_FUSE_LSEEK', fuse_lseek.found())
config_host_data.set('CONFIG_X11', x11.found())
diff --git a/block/qcow2.c b/block/qcow2.c
index ee4530cdbd..06bfbbf7b8 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -3540,17 +3540,36 @@ qcow2_co_create(BlockdevCreateOptions *create_options,
Error **errp)
}
}
- if (qcow2_opts->has_compression_type &&
- qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) {
-
- ret = -EINVAL;
-
- if (version < 3) {
+ if (version < 3) {
+ if (qcow2_opts->has_compression_type &&
+ qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB)
+ {
+ ret = -EINVAL;
error_setg(errp, "Non-zlib compression type is only supported with
"
"compatibility level 1.1 and above (use version=v3 or "
"greater)");
goto out;
}
+ } else {
+ if (qcow2_opts->has_compression_type) {
+ compression_type = qcow2_opts->compression_type;
+#ifdef CONFIG_QCOW2_ZSTD_DEFAULT
+ } else {
+ compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
+#endif
+ }
+
+#ifndef CONFIG_ZSTD
+ assert(compression_type == QCOW2_COMPRESSION_TYPE_ZLIB);
+#endif
+ }
+
+ if (qcow2_opts->has_compression_type &&
+ qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) {
+
+ ret = -EINVAL;
+
+ compression_type = qcow2_opts->compression_type;
switch (qcow2_opts->compression_type) {
#ifdef CONFIG_ZSTD
@@ -3562,7 +3581,6 @@ qcow2_co_create(BlockdevCreateOptions *create_options,
Error **errp)
goto out;
}
- compression_type = qcow2_opts->compression_type;
}
/* Create BlockBackend to write to the image */
diff --git a/meson_options.txt b/meson_options.txt
index 3d304cac96..8af9bb97f5 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -108,6 +108,8 @@ option('xkbcommon', type : 'feature', value : 'auto',
description: 'xkbcommon support')
option('zstd', type : 'feature', value : 'auto',
description: 'zstd compression support')
+option('qcow2_zstd_default', type : 'feature', value : 'disabled',
+ description: 'Use zstd compression type for qcow2 image creation by
default')
option('fuse', type: 'feature', value: 'auto',
description: 'FUSE block device export')
option('fuse_lseek', type : 'feature', value : 'auto',
--
2.29.2
