On Mon, Jan 25, 2021 at 1:33 AM Philippe Mathieu-Daudé <f4...@amsat.org> wrote:
>
> On 1/23/21 11:40 AM, Bin Meng wrote:
> > From: Bin Meng <bin.m...@windriver.com>
> >
> > This fixes the wrong command index for STOP_TRANSMISSION, the
> > required command to interrupt the multiple block read command,
> > in the old codes. It should be CMD12 (0x4c), not CMD13 (0x4d).
> >
> > Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
> > Signed-off-by: Bin Meng <bin.m...@windriver.com>
> >
> > ---
> >
> > Changes in v2:
> > - Make this fix a separate patch from the CMD18 support
> >
> > hw/sd/ssi-sd.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
> > index 5763afeba0..9e2f13374a 100644
> > --- a/hw/sd/ssi-sd.c
> > +++ b/hw/sd/ssi-sd.c
> > @@ -83,7 +83,7 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev,
> > uint32_t val)
> > ssi_sd_state *s = SSI_SD(dev);
> >
> > /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data.
> > */
> > - if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
> > + if (s->mode == SSI_SD_DATA_READ && val == 0x4c) {
>
> Patch is correct, but I wonder if we couldn't improve using instead:
>
> if (s->mode == SSI_SD_DATA_READ && ((val & 0x3f) == 12)) {
>
(val & 0x3f == 12) isn't correct because it can catch values equal to
0x7c or 0xfc.
Regards,
Bin
