On 1/23/21 11:40 AM, Bin Meng wrote:
> From: Bin Meng <bin.m...@windriver.com>
>
> This fixes the wrong command index for STOP_TRANSMISSION, the
> required command to interrupt the multiple block read command,
> in the old codes. It should be CMD12 (0x4c), not CMD13 (0x4d).
>
> Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
> Signed-off-by: Bin Meng <bin.m...@windriver.com>
>
> ---
>
> Changes in v2:
> - Make this fix a separate patch from the CMD18 support
>
> hw/sd/ssi-sd.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
> index 5763afeba0..9e2f13374a 100644
> --- a/hw/sd/ssi-sd.c
> +++ b/hw/sd/ssi-sd.c
> @@ -83,7 +83,7 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev,
> uint32_t val)
> ssi_sd_state *s = SSI_SD(dev);
>
> /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */
> - if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
> + if (s->mode == SSI_SD_DATA_READ && val == 0x4c) {
Patch is correct, but I wonder if we couldn't improve using instead:
if (s->mode == SSI_SD_DATA_READ && ((val & 0x3f) == 12)) {
> s->mode = SSI_SD_CMD;
> /* There must be at least one byte delay before the card responds.
> */
> s->stopping = 1;
>
