Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property.
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org> --- At some point we should make the SysTick take a Clock itself so that we can get rid of the system_clock_scale global entirely. (In fact we want two Clocks: one that is the CPU clock and one for the 'external reference clock' whose period is currently hardcoded at 1000ns in systick_scale()...) --- hw/arm/armsse.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index 4349ce9bfdb..1da0c1be4c7 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -232,6 +232,16 @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -451,9 +461,11 @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -1115,7 +1127,8 @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1