On Thu, Dec 31, 2020 at 3:45 AM Bin Meng <bmeng...@gmail.com> wrote:
>
> From: Bin Meng <bin.m...@windriver.com>
>
> This adds the QSPI2 controller to the SoC, and connnects an SD
> card to it. The generation of corresponding device tree source
> fragment is also added.
>
> Specify machine property `msel` to 11 to boot the same upstream
> U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
> Note subsequent payload is stored in the SD card image.
>
> $ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
> -bios u-boot-spl.bin -drive file=sdcard.img,if=sd
>
> Signed-off-by: Bin Meng <bin.m...@windriver.com>
Reviewed-by: Alistair Francis <alistair.fran...@wdc.com>
Alistair
> ---
>
> include/hw/riscv/sifive_u.h | 3 +++
> hw/riscv/sifive_u.c | 43 +++++++++++++++++++++++++++++++++++--
> hw/riscv/Kconfig | 1 +
> 3 files changed, 45 insertions(+), 2 deletions(-)
>
> diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
> index 8824b7c031..de1464a2ce 100644
> --- a/include/hw/riscv/sifive_u.h
> +++ b/include/hw/riscv/sifive_u.h
> @@ -47,6 +47,7 @@ typedef struct SiFiveUSoCState {
> SiFiveUOTPState otp;
> SiFivePDMAState dma;
> SiFiveSPIState spi0;
> + SiFiveSPIState spi2;
> CadenceGEMState gem;
>
> uint32_t serial;
> @@ -85,6 +86,7 @@ enum {
> SIFIVE_U_DEV_UART1,
> SIFIVE_U_DEV_GPIO,
> SIFIVE_U_DEV_QSPI0,
> + SIFIVE_U_DEV_QSPI2,
> SIFIVE_U_DEV_OTP,
> SIFIVE_U_DEV_DMC,
> SIFIVE_U_DEV_FLASH0,
> @@ -99,6 +101,7 @@ enum {
> SIFIVE_U_L2CC_IRQ2 = 3,
> SIFIVE_U_UART0_IRQ = 4,
> SIFIVE_U_UART1_IRQ = 5,
> + SIFIVE_U_QSPI2_IRQ = 6,
> SIFIVE_U_GPIO_IRQ0 = 7,
> SIFIVE_U_GPIO_IRQ1 = 8,
> SIFIVE_U_GPIO_IRQ2 = 9,
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index acac4feef1..d59333d18d 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -16,6 +16,7 @@
> * 6) GEM (Gigabit Ethernet Controller) and management block
> * 7) DMA (Direct Memory Access Controller)
> * 8) SPI0 connected to an SPI flash
> + * 9) SPI2 connected to an SD card
> *
> * This board currently generates devicetree dynamically that indicates at
> least
> * two harts and up to five harts.
> @@ -77,6 +78,7 @@ static const struct MemmapEntry {
> [SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 },
> [SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 },
> [SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 },
> + [SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 },
> [SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 },
> [SIFIVE_U_DEV_OTP] = { 0x10070000, 0x1000 },
> [SIFIVE_U_DEV_GEM] = { 0x10090000, 0x2000 },
> @@ -345,6 +347,31 @@ static void create_fdt(SiFiveUState *s, const struct
> MemmapEntry *memmap,
> "sifive,fu540-c000-ccache");
> g_free(nodename);
>
> + nodename = g_strdup_printf("/soc/spi@%lx",
> + (long)memmap[SIFIVE_U_DEV_QSPI2].base);
> + qemu_fdt_add_subnode(fdt, nodename);
> + qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
> + qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
> + qemu_fdt_setprop_cells(fdt, nodename, "clocks",
> + prci_phandle, PRCI_CLK_TLCLK);
> + qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
> + qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
> + qemu_fdt_setprop_cells(fdt, nodename, "reg",
> + 0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
> + 0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
> + qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
> + g_free(nodename);
> +
> + nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
> + (long)memmap[SIFIVE_U_DEV_QSPI2].base);
> + qemu_fdt_add_subnode(fdt, nodename);
> + qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
> + qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
> + qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
> + qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
> + qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
> + g_free(nodename);
> +
> nodename = g_strdup_printf("/soc/spi@%lx",
> (long)memmap[SIFIVE_U_DEV_QSPI0].base);
> qemu_fdt_add_subnode(fdt, nodename);
> @@ -469,8 +496,8 @@ static void sifive_u_machine_init(MachineState *machine)
> uint32_t fdt_load_addr;
> uint64_t kernel_entry;
> DriveInfo *dinfo;
> - DeviceState *flash_dev;
> - qemu_irq flash_cs;
> + DeviceState *flash_dev, *sd_dev;
> + qemu_irq flash_cs, sd_cs;
>
> /* Initialize SoC */
> object_initialize_child(OBJECT(machine), "soc", &s->soc,
> TYPE_RISCV_U_SOC);
> @@ -616,6 +643,12 @@ static void sifive_u_machine_init(MachineState *machine)
>
> flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
> +
> + /* Connect an SD card to SPI2 */
> + sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
> +
> + sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
> }
>
> static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
> @@ -730,6 +763,7 @@ static void sifive_u_soc_instance_init(Object *obj)
> object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
> object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
> object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
> + object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
> }
>
> static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
> @@ -883,6 +917,11 @@ static void sifive_u_soc_realize(DeviceState *dev, Error
> **errp)
> memmap[SIFIVE_U_DEV_QSPI0].base);
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
> qdev_get_gpio_in(DEVICE(s->plic),
> SIFIVE_U_QSPI0_IRQ));
> + sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
> + memmap[SIFIVE_U_DEV_QSPI2].base);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
> + qdev_get_gpio_in(DEVICE(s->plic),
> SIFIVE_U_QSPI2_IRQ));
> }
>
> static Property sifive_u_soc_props[] = {
> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> index 6330297b4e..d139074b02 100644
> --- a/hw/riscv/Kconfig
> +++ b/hw/riscv/Kconfig
> @@ -57,6 +57,7 @@ config SIFIVE_U
> select SIFIVE_U_OTP
> select SIFIVE_U_PRCI
> select SSI_M25P80
> + select SSI_SD
> select UNIMP
>
> config SPIKE
> --
> 2.25.1
>
>
