On Tue, Dec 22, 2020 at 2:30 PM Bin Meng <bmeng...@gmail.com> wrote:
>
> On Thu, Dec 17, 2020 at 1:28 PM Bin Meng <bmeng...@gmail.com> wrote:
> >
> > From: Bin Meng <bin.m...@windriver.com>
> >
> > For the ECSPIx_CONREG register BURST_LENGTH field, the manual says:
> >
> > 0x020 A SPI burst contains the 1 LSB in first word and all 32 bits in
> > second word.
> > 0x021 A SPI burst contains the 2 LSB in first word and all 32 bits in
> > second word.
> >
> > Current logic uses either s->burst_length or 32, whichever smaller,
> > to determine how many bits it should read from the tx fifo each time.
> > For example, for a 48 bit burst length, current logic transfers the
> > first 32 bit from the first word in the tx fifo, followed by a 16
> > bit from the second word in the tx fifo, which is wrong. The correct
> > logic should be: transfer the first 16 bit from the first word in
> > the tx fifo, followed by a 32 bit from the second word in the tx fifo.
> >
> > With this change, SPI flash can be successfully probed by U-Boot on
> > imx6 sabrelite board.
> >
> > => sf probe
> > SF: Detected sst25vf016b with page size 256 Bytes, erase size 4 KiB,
> > total 2 MiB
> >
> > Fixes: c906a3a01582 ("i.MX: Add the Freescale SPI Controller")
> > Signed-off-by: Bin Meng <bin.m...@windriver.com>
> > ---
> >
> > hw/ssi/imx_spi.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
>
> Ping?
Ping?
