From: Frank Chang <frank.ch...@sifive.com> This patchset implements the vector extension v1.0 for RISC-V on QEMU.
This patchset is sent as RFC because RVV v1.0 is still in draft state. v2 patchset was sent for RVV v0.9 and bumped to RVV v1.0 since v3 patchset. The port is available here: https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v4 You can change the cpu argument: vext_spec to v1.0 (i.e. vext_spec=v1.0) to run with RVV v1.0 instructions. Note: This patchset depends on two other patchsets listed in Based-on section below so it might not able to be built unless those two patchsets are applied. Changelog: v4 * remove explicit float flmul variable in DisasContext. * replace floating-point calculations with shift operations to improve performance. * relax RV_VLEN_MAX to 512-bits. v3 * apply nan-box helpers from Richard Henderson. * remove fp16 api changes as they are sent independently in another pathcset by Chih-Min Chao. * remove all tail elements clear functions as tail elements can retain unchanged for either VTA set to undisturbed or agnostic. * add fp16 nan-box check generator function. * add floating-point rounding mode enum. * replace flmul arithmetic with shifts to avoid floating-point conversions. * add Zvqmac extension. * replace gdbstub vector register xml files with dynamic generator. * bumped to RVV v1.0. * RVV v1.0 related changes: * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register load/store instructions * add vrgatherei16 instruction. * rearranged bits in vtype to make vlmul bits into a contiguous field. v2 * drop v0.7.1 support. * replace invisible return check macros with functions. * move mark_vs_dirty() to translators. * add SSTATUS_VS flag for s-mode. * nan-box scalar fp register for floating-point operations. * add gdbstub files for vector registers to allow system-mode debugging with GDB. Based-on: <20200724002807.441147-1-richard.hender...@linaro.org/> Based-on: <1596102747-20226-1-git-send-email-chihmin.c...@sifive.com/> Frank Chang (62): target/riscv: drop vector 0.7.1 and add 1.0 support target/riscv: Use FIELD_EX32() to extract wd field target/riscv: rvv-1.0: introduce writable misa.v field target/riscv: rvv-1.0: remove rvv related codes from fcsr registers target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr registers target/riscv: rvv-1.0: remove MLEN calculations target/riscv: rvv-1.0: add fractional LMUL target/riscv: rvv-1.0: add VMA and VTA target/riscv: rvv-1.0: update check functions target/riscv: introduce more imm value modes in translator functions target/riscv: rvv:1.0: add translation-time nan-box helper function target/riscv: rvv-1.0: configure instructions target/riscv: rvv-1.0: stride load and store instructions target/riscv: rvv-1.0: index load and store instructions target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns target/riscv: rvv-1.0: fault-only-first unit stride load target/riscv: rvv-1.0: amo operations target/riscv: rvv-1.0: load/store whole register instructions target/riscv: rvv-1.0: update vext_max_elems() for load/store insns target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation target/riscv: rvv-1.0: floating-point square-root instruction target/riscv: rvv-1.0: floating-point classify instructions target/riscv: rvv-1.0: mask population count instruction target/riscv: rvv-1.0: find-first-set mask bit instruction target/riscv: rvv-1.0: set-X-first mask bit instructions target/riscv: rvv-1.0: iota instruction target/riscv: rvv-1.0: element index instruction target/riscv: rvv-1.0: allow load element with sign-extended target/riscv: rvv-1.0: register gather instructions target/riscv: rvv-1.0: integer scalar move instructions target/riscv: rvv-1.0: floating-point move instruction target/riscv: rvv-1.0: floating-point scalar move instructions target/riscv: rvv-1.0: whole register move instructions target/riscv: rvv-1.0: integer extension instructions target/riscv: rvv-1.0: single-width averaging add and subtract instructions target/riscv: rvv-1.0: single-width bit shift instructions target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow target/riscv: rvv-1.0: narrowing integer right shift instructions target/riscv: rvv-1.0: widening integer multiply-add instructions target/riscv: rvv-1.0: add Zvqmac extension target/riscv: rvv-1.0: quad-widening integer multiply-add instructions target/riscv: rvv-1.0: single-width saturating add and subtract instructions target/riscv: rvv-1.0: integer comparison instructions target/riscv: use softfloat lib float16 comparison functions target/riscv: rvv-1.0: floating-point compare instructions target/riscv: rvv-1.0: mask-register logical instructions target/riscv: rvv-1.0: slide instructions target/riscv: rvv-1.0: floating-point slide instructions target/riscv: rvv-1.0: narrowing fixed-point clip instructions target/riscv: rvv-1.0: single-width floating-point reduction target/riscv: rvv-1.0: widening floating-point reduction instructions target/riscv: rvv-1.0: single-width scaling shift instructions target/riscv: rvv-1.0: remove widening saturating scaled multiply-add target/riscv: rvv-1.0: remove vmford.vv and vmford.vf target/riscv: rvv-1.0: remove integer extract instruction target/riscv: rvv-1.0: floating-point min/max instructions target/riscv: introduce floating-point rounding mode enum target/riscv: rvv-1.0: floating-point/integer type-convert instructions target/riscv: rvv-1.0: widening floating-point/integer type-convert target/riscv: add "set round to odd" rounding mode helper function target/riscv: rvv-1.0: narrowing floating-point/integer type-convert target/riscv: rvv-1.0: relax RV_VLEN_MAX to 512-bits Greentime Hu (2): target/riscv: rvv-1.0: add vlenb register target/riscv: gdb: support vector registers for rv32 Hsiangkai Wang (2): target/riscv: gdb: modify gdb csr xml file to align with csr register map target/riscv: gdb: support vector registers for rv64 LIU Zhiwei (4): target/riscv: rvv-1.0: add mstatus VS field target/riscv: rvv-1.0: add sstatus VS field target/riscv: rvv-1.0: add translation-time vector context status target/riscv: rvv-1.0: add vcsr register gdb-xml/riscv-32bit-csr.xml | 18 +- gdb-xml/riscv-64bit-csr.xml | 18 +- target/riscv/cpu.c | 12 +- target/riscv/cpu.h | 97 +- target/riscv/cpu_bits.h | 10 + target/riscv/cpu_helper.c | 16 +- target/riscv/csr.c | 73 +- target/riscv/fpu_helper.c | 17 +- target/riscv/gdbstub.c | 126 +- target/riscv/helper.h | 523 ++-- target/riscv/insn32-64.decode | 18 +- target/riscv/insn32.decode | 295 +- target/riscv/insn_trans/trans_rvv.inc.c | 2366 ++++++++++------ target/riscv/internals.h | 19 +- target/riscv/translate.c | 68 +- target/riscv/vector_helper.c | 3269 +++++++++++------------ 16 files changed, 4051 insertions(+), 2894 deletions(-) -- 2.17.1
