[PATCH 2/3] Add the ability to change the FEC PHY MDIO device number on i.MX6 processor

[Jean-Christophe Dubois]

Signed-off-by: Jean-Christophe Dubois <j...@tribudubois.net>
---
 hw/arm/fsl-imx6.c         | 7 +++++++
 include/hw/arm/fsl-imx6.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index 4ae3c3efc28..0721f333497 100644
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -402,6 +402,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
                                             spi_table[i].irq));
     }
 
+    object_property_set_uint(OBJECT(&s->eth), s->phy_num, "phy-num", &err);
     qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]);
     sysbus_realize(SYS_BUS_DEVICE(&s->eth), &err);
     if (err) {
@@ -476,10 +477,16 @@ static void fsl_imx6_realize(DeviceState *dev, Error 
**errp)
                                 &s->ocram_alias);
 }
 
+static Property fsl_imx6_properties[] = {
+    DEFINE_PROP_UINT32("fec-phy-num", FslIMX6State, phy_num, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void fsl_imx6_class_init(ObjectClass *oc, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
+    device_class_set_props(dc, fsl_imx6_properties);
     dc->realize = fsl_imx6_realize;
     dc->desc = "i.MX6 SOC";
     /* Reason: Uses serial_hd() in the realize() function */
diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h
index 1ebd7513246..162fe99375d 100644
--- a/include/hw/arm/fsl-imx6.h
+++ b/include/hw/arm/fsl-imx6.h
@@ -73,6 +73,7 @@ typedef struct FslIMX6State {
     MemoryRegion   caam;
     MemoryRegion   ocram;
     MemoryRegion   ocram_alias;
+    uint32_t       phy_num;
 } FslIMX6State;
 
 
-- 
2.25.1