After a closer look,
>> @@ -45,9 +46,15 @@ static void pca9552_update_pin_input(PCA9552State *s)
>> switch (config) {
>> case PCA9552_LED_ON:
>> s->regs[input_reg] |= 1 << input_shift;
>> + if (input_shift < s->nr_leds) {
This seems like a superfluous test.
>> + trace_pca9552_led_set(input_shift, true);
This should be using 'i' and the output is not very concise :
564609@1592326881.815616:pca9552_led_set LED#0 state:1
564609@1592326881.815660:pca9552_led_set LED#1 state:1
564609@1592326881.815669:pca9552_led_set LED#2 state:1
564609@1592326881.815677:pca9552_led_set LED#3 state:1
564609@1592326881.815706:pca9552_led_set LED#4 state:0
564609@1592326881.815715:pca9552_led_set LED#5 state:0
564609@1592326881.815727:pca9552_led_set LED#6 state:0
564609@1592326881.815740:pca9552_led_set LED#7 state:0
564609@1592326881.815748:pca9552_led_set LED#8 state:0
564609@1592326881.815759:pca9552_led_set LED#9 state:0
564609@1592326881.815767:pca9552_led_set LED#10 state:0
564609@1592326881.815779:pca9552_led_set LED#11 state:0
564609@1592326881.815790:pca9552_led_set LED#12 state:0
564609@1592326881.815802:pca9552_led_set LED#13 state:1
564609@1592326881.815813:pca9552_led_set LED#14 state:1
564609@1592326881.815826:pca9552_led_set LED#15 state:1
I would instead simply dump the contents of the PCA9552_INPUT registers :
LEDS = 1111000000000101
LEDS = 1111000000000111
....
C.
>> + }
>> break;
>> case PCA9552_LED_OFF:
>> s->regs[input_reg] &= ~(1 << input_shift);
>> + if (input_shift < s->nr_leds) {
>> + trace_pca9552_led_set(input_shift, false);
>> + }
>> break;
>> case PCA9552_LED_PWM0:
>> case PCA9552_LED_PWM1:
>> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
>> index 5561746866..ed80d0d1be 100644
>> --- a/hw/misc/trace-events
>> +++ b/hw/misc/trace-events
>> @@ -206,3 +206,6 @@ via1_rtc_cmd_pram_sect_write(int sector, int offset, int
>> addr, int value) "secto
>> # grlib_ahb_apb_pnp.c
>> grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read
>> addr:0x%03"PRIx64" data:0x%08x"
>> grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read
>> addr:0x%03"PRIx64" data:0x%08x"
>> +
>> +# pca9552.c
>> +pca9552_led_set(unsigned id, bool state) "LED#%d state:%u"
>>
>
