On Mon, Mar 09, 2020 at 08:18:13PM +0100, BALATON Zoltan wrote:
> Some machines operate in "non 100% native mode" where interrupts are
> fixed at legacy IDE interrupts and some guests expect this behaviour
> without checking based on knowledge about hardware. Even Linux has
> arch specific workarounds for this that are activated on such boards
> so this needs to be emulated as well.
>
> Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu>
> ---
> v2: Don't use PCI_INTERRUPT_LINE in via_ide_set_irq()
> v3: Patch pci.c instead of local workaround for PCI reset clearing
> PCI_INTERRUPT_PIN config reg
>
> hw/ide/via.c | 37 +++++++++++++++++++++++++++++--------
> hw/mips/mips_fulong2e.c | 2 +-
> include/hw/ide.h | 3 ++-
> 3 files changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/hw/ide/via.c b/hw/ide/via.c
> index 096de8dba0..02d29809f2 100644
> --- a/hw/ide/via.c
> +++ b/hw/ide/via.c
> @@ -1,9 +1,10 @@
> /*
> - * QEMU IDE Emulation: PCI VIA82C686B support.
> + * QEMU VIA southbridge IDE emulation (VT82C686B, VT8231)
> *
> * Copyright (c) 2003 Fabrice Bellard
> * Copyright (c) 2006 Openedhand Ltd.
> * Copyright (c) 2010 Huacai Chen <zltjiang...@gmail.com>
> + * Copyright (c) 2019-2020 BALATON Zoltan
> *
> * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> * of this software and associated documentation files (the "Software"), to
> deal
> @@ -25,6 +26,8 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qemu/range.h"
> +#include "hw/qdev-properties.h"
> #include "hw/pci/pci.h"
> #include "migration/vmstate.h"
> #include "qemu/module.h"
> @@ -111,11 +114,18 @@ static void via_ide_set_irq(void *opaque, int n, int
> level)
> } else {
> d->config[0x70 + n * 8] &= ~0x80;
> }
> -
> level = (d->config[0x70] & 0x80) || (d->config[0x78] & 0x80);
> - n = pci_get_byte(d->config + PCI_INTERRUPT_LINE);
> - if (n) {
> - qemu_set_irq(isa_get_irq(NULL, n), level);
> +
> + /*
> + * Some machines operate in "non 100% native mode" where
> PCI_INTERRUPT_LINE
> + * is not used but IDE always uses ISA IRQ 14 and 15 even in native mode.
> + * Some guest drivers expect this, often without checking.
> + */
> + if (!(pci_get_byte(d->config + PCI_CLASS_PROG) & (n ? 4 : 1)) ||
> + PCI_IDE(d)->flags & BIT(PCI_IDE_LEGACY_IRQ)) {
> + qemu_set_irq(isa_get_irq(NULL, (n ? 15 : 14)), level);
> + } else {
> + qemu_set_irq(isa_get_irq(NULL, 14), level);
> }
> }
>
> @@ -169,7 +179,8 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
>
> pci_config_set_prog_interface(pci_conf, 0x8f); /* native PCI ATA mode */
> pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
> - dev->wmask[PCI_INTERRUPT_LINE] = 0xf;
> + dev->wmask[PCI_CLASS_PROG] = 5;
What's the story here? Why is class suddenly writeable?
> + dev->wmask[PCI_INTERRUPT_LINE] = 0;
>
> memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
> &d->bus[0], "via-ide0-data", 8);
> @@ -213,14 +224,23 @@ static void via_ide_exitfn(PCIDevice *dev)
> }
> }
>
> -void via_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
> +void via_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn,
> + bool legacy_irq)
> {
> PCIDevice *dev;
>
> - dev = pci_create_simple(bus, devfn, "via-ide");
> + dev = pci_create(bus, devfn, "via-ide");
> + qdev_prop_set_bit(&dev->qdev, "legacy-irq", legacy_irq);
> + qdev_init_nofail(&dev->qdev);
> pci_ide_create_devs(dev, hd_table);
> }
>
> +static Property via_ide_properties[] = {
> + DEFINE_PROP_BIT("legacy-irq", PCIIDEState, flags, PCI_IDE_LEGACY_IRQ,
> + false),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> static void via_ide_class_init(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> @@ -233,6 +253,7 @@ static void via_ide_class_init(ObjectClass *klass, void
> *data)
> k->device_id = PCI_DEVICE_ID_VIA_IDE;
> k->revision = 0x06;
> k->class_id = PCI_CLASS_STORAGE_IDE;
> + device_class_set_props(dc, via_ide_properties);
> set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
> }
>
> diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
> index 4727b1d3a4..150182c62a 100644
> --- a/hw/mips/mips_fulong2e.c
> +++ b/hw/mips/mips_fulong2e.c
> @@ -257,7 +257,7 @@ static void vt82c686b_southbridge_init(PCIBus *pci_bus,
> int slot, qemu_irq intc,
> isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
>
> ide_drive_get(hd, ARRAY_SIZE(hd));
> - via_ide_init(pci_bus, hd, PCI_DEVFN(slot, 1));
> + via_ide_init(pci_bus, hd, PCI_DEVFN(slot, 1), false);
>
> pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
> pci_create_simple(pci_bus, PCI_DEVFN(slot, 3), "vt82c686b-usb-uhci");
> diff --git a/include/hw/ide.h b/include/hw/ide.h
> index d88c5ee695..2a7001ccba 100644
> --- a/include/hw/ide.h
> +++ b/include/hw/ide.h
> @@ -18,7 +18,8 @@ PCIDevice *pci_piix3_xen_ide_init(PCIBus *bus, DriveInfo
> **hd_table, int devfn);
> PCIDevice *pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
> PCIDevice *pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
> int pci_piix3_xen_ide_unplug(DeviceState *dev, bool aux);
> -void via_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
> +void via_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn,
> + bool legacy_irq);
>
> /* ide-mmio.c */
> void mmio_ide_init_drives(DeviceState *dev, DriveInfo *hd0, DriveInfo *hd1);
> --
> 2.21.1
>
>
