On 21/01/2020 00.51, Philippe Mathieu-Daudé wrote: > This test runs U-Boot on the Raspberry Pi 2. > It is very simple and fast: > > $ avocado --show=app,console run -t raspi2 -t u-boot tests/acceptance/ > JOB LOG : avocado/job-results/job-2020-01-20T23.40-2424777/job.log > (1/1) > tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot: > console: MMC: sdhci@7e300000: 0 > console: Loading Environment from FAT... Card did not respond to voltage > select! > console: In: serial > console: Out: vidconsole > console: Err: vidconsole > console: Net: No ethernet found. > console: starting USB... > console: USB0: Port not available. > console: Hit any key to stop autoboot: 0 > console: U-Boot> > console: U-Boot> bdinfo > console: arch_number = 0x00000000 > console: boot_params = 0x00000100 > console: DRAM bank = 0x00000000 > console: -> start = 0x00000000 > console: -> size = 0x3c000000 > console: baudrate = 115200 bps > console: TLB addr = 0x3bff0000 > console: relocaddr = 0x3bf64000 > console: reloc off = 0x3bf5c000 > console: irq_sp = 0x3bb5fec0 > console: sp start = 0x3bb5feb0 > console: Early malloc usage: 2a4 / 400 > console: fdt_blob = 0x3bfbdfb0 > console: U-Boot> version > console: U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000) > console: gcc (Debian 8.3.0-7) 8.3.0 > console: GNU ld (GNU Binutils for Debian) 2.31.1 > console: U-Boot> reset > console: resetting ... > PASS (0.46 s) > > U-Boot is built by the Debian project, see: > https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot > > Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org> > --- > tests/acceptance/boot_linux_console.py | 28 ++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/tests/acceptance/boot_linux_console.py > b/tests/acceptance/boot_linux_console.py > index e40b84651b..682b801b4f 100644 > --- a/tests/acceptance/boot_linux_console.py > +++ b/tests/acceptance/boot_linux_console.py
The file is called boot_*linux*_console.py ... so shouldn't tests that don't use Linux rather go into another file instead? Either machine_arm_raspi.py or maybe a boot_firmware_console.py file? Thomas
