On Thu, Sep 26, 2019 at 07:34:24PM +0200, Philippe Mathieu-Daudé wrote: > Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2 > board and verify the serial is working. > > The kernel image and DeviceTree blob are built by the Raspbian > project (based on Debian): > https://www.raspbian.org/RaspbianImages > as recommended by the Raspberry Pi project: > https://www.raspberrypi.org/downloads/raspbian/ > > If ARM is a target being built, "make check-acceptance" will > automatically include this test by the use of the "arch:arm" tags. > > Alternatively, this test can be run using: > > $ avocado run -t arch:arm tests/acceptance > $ avocado run -t machine:raspi2 tests/acceptance > > Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org> > --- > v3: removed debug printf (Cleber) > use serial_kernel_cmdline dict > --- > tests/acceptance/boot_linux_console.py | 36 ++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/tests/acceptance/boot_linux_console.py > b/tests/acceptance/boot_linux_console.py > index 079590f0c8..7eaf6cb60e 100644 > --- a/tests/acceptance/boot_linux_console.py > +++ b/tests/acceptance/boot_linux_console.py > @@ -318,6 +318,42 @@ class BootLinuxConsole(Test): > self.vm.launch() > self.wait_for_console_pattern('init started: BusyBox') > > + def do_test_arm_raspi2(self, uart_id): > + """ > + The kernel can be rebuilt using the kernel source referenced > + and following the instructions on the on: > + https://www.raspberrypi.org/documentation/linux/kernel/building.md > + """ > + serial_kernel_cmdline = { > + 0: 'earlycon=pl011,0x3f201000 console=ttyAMA0', > + } > + deb_url = ('http://archive.raspberrypi.org/debian/' > + 'pool/main/r/raspberrypi-firmware/' > + 'raspberrypi-kernel_1.20190215-1_armhf.deb') > + deb_hash = 'cd284220b32128c5084037553db3c482426f3972' > + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) > + kernel_path = self.extract_from_deb(deb_path, '/boot/kernel7.img') > + dtb_path = self.extract_from_deb(deb_path, > '/boot/bcm2709-rpi-2-b.dtb') > + > + self.vm.set_machine('raspi2') > + self.vm.set_console() > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + > + serial_kernel_cmdline[uart_id]) > + self.vm.add_args('-kernel', kernel_path, > + '-dtb', dtb_path, > + '-append', kernel_command_line) > + self.vm.launch() > + console_pattern = 'Kernel command line: %s' % kernel_command_line > + self.wait_for_console_pattern(console_pattern) > + > + def test_arm_raspi2_uart0(self): > + """ > + :avocado: tags=arch:arm > + :avocado: tags=machine:raspi2 > + :avocado: tags=device:pl011 > + """ > + self.do_test_arm_raspi2(0) > + > def test_s390x_s390_ccw_virtio(self): > """ > :avocado: tags=arch:s390x > -- > 2.20.1 >
Reviewed-by: Cleber Rosa <cr...@redhat.com>
