On Tue, Jan 16, 2018 at 3:22 PM, Alistair Francis <alistair.fran...@xilinx.com> wrote: > > This series adds the ZynqMP Power Management Unit (PMU) machine with basic > functionality. > > The machine only has the > - CPU > - Memory > - Interrupt controller > - IPI device > > connected, but that is enough to run some of the ROM and firmware > code on the machine > > The series also adds the IPI device and connects it to the ZynqMP ARM > side and the ZynqMP PMU. These IPI devices don't connect between the ARM > and MicroBlaze instances though. > > V5: > - Fix clang makecheck error > - Rebase on master > V4: > - Rename the ZCU102 machine to just ZynqMP > - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc" > - Move the IPI device to the machine instead of the SoC > V3: > - Add the interrupt controller > - Replace some of the error_fatals with errp > - Fix the PMU CPU name > > > > Alistair Francis (9): > microblaze: boot.c: Don't try to find NULL pointer > xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU > xlnx-zynqmp-pmu: Add the CPU and memory > aarch64-softmmu.mak: Use an ARM specific config > xlnx-pmu-iomod-intc: Add the PMU Interrupt controller > xlnx-zynqmp-pmu: Connect the PMU interrupt controller > xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device > xlnx-zynqmp-pmu: Connect the IPI device to the PMU > xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC > > default-configs/aarch64-softmmu.mak | 1 + > default-configs/microblaze-softmmu.mak | 1 + > hw/arm/Makefile.objs | 2 +- > hw/arm/xlnx-zynqmp.c | 14 + > hw/display/Makefile.objs | 2 +- > hw/dma/Makefile.objs | 1 + > hw/intc/Makefile.objs | 2 + > hw/intc/xlnx-pmu-iomod-intc.c | 554 > +++++++++++++++++++++++++++++++++ > hw/intc/xlnx-zynqmp-ipi.c | 377 ++++++++++++++++++++++ > hw/microblaze/Makefile.objs | 1 + > hw/microblaze/boot.c | 2 +- > hw/microblaze/xlnx-zynqmp-pmu.c | 204 ++++++++++++ > include/hw/arm/xlnx-zynqmp.h | 2 + > include/hw/intc/xlnx-pmu-iomod-intc.h | 58 ++++ > include/hw/intc/xlnx-zynqmp-ipi.h | 57 ++++ > 15 files changed, 1275 insertions(+), 3 deletions(-) > create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c > create mode 100644 hw/intc/xlnx-zynqmp-ipi.c > create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c > create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h > create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h > > -- > 2.14.1 > > This email and any attachments are intended for the sole use of the named > recipient(s) and contain(s) confidential information that may be proprietary, > privileged or copyrighted under applicable law. If you are not the intended > recipient, do not read, copy, or forward this email message or any > attachments. Delete this email message and any attachments immediately.
ARGH! Apparently Xilinx started this crap up again. I didn't realise this is on all my emails. I'll work on getting it removed. Alistair
