This series adds the ZynqMP Power Management Unit (PMU) machine with basic functionality.
The machine only has the - CPU - Memory - Interrupt controller - IPI device connected, but that is enough to run some of the ROM and firmware code on the machine The series also adds the IPI device and connects it to the ZynqMP ARM side and the ZynqMP PMU. These IPI devices don't connect between the ARM and MicroBlaze instances though. V5: - Fix clang makecheck error - Rebase on master V4: - Rename the ZCU102 machine to just ZynqMP - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc" - Move the IPI device to the machine instead of the SoC V3: - Add the interrupt controller - Replace some of the error_fatals with errp - Fix the PMU CPU name Alistair Francis (9): microblaze: boot.c: Don't try to find NULL pointer xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU xlnx-zynqmp-pmu: Add the CPU and memory aarch64-softmmu.mak: Use an ARM specific config xlnx-pmu-iomod-intc: Add the PMU Interrupt controller xlnx-zynqmp-pmu: Connect the PMU interrupt controller xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device xlnx-zynqmp-pmu: Connect the IPI device to the PMU xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC default-configs/aarch64-softmmu.mak | 1 + default-configs/microblaze-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 +- hw/arm/xlnx-zynqmp.c | 14 + hw/display/Makefile.objs | 2 +- hw/dma/Makefile.objs | 1 + hw/intc/Makefile.objs | 2 + hw/intc/xlnx-pmu-iomod-intc.c | 554 +++++++++++++++++++++++++++++++++ hw/intc/xlnx-zynqmp-ipi.c | 377 ++++++++++++++++++++++ hw/microblaze/Makefile.objs | 1 + hw/microblaze/boot.c | 2 +- hw/microblaze/xlnx-zynqmp-pmu.c | 204 ++++++++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/intc/xlnx-pmu-iomod-intc.h | 58 ++++ include/hw/intc/xlnx-zynqmp-ipi.h | 57 ++++ 15 files changed, 1275 insertions(+), 3 deletions(-) create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c create mode 100644 hw/intc/xlnx-zynqmp-ipi.c create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h -- 2.14.1 This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
