Add minimal code needed to allow upstream Linux guest to boot.
Cc: Peter Maydell <peter.mayd...@linaro.org>
Cc: Jason Wang <jasow...@redhat.com>
Cc: Philippe Mathieu-Daudé <f4...@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-...@nongnu.org
Cc: yurov...@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
hw/misc/Makefile.objs | 1 +
hw/misc/imx7_gpr.c | 119 +++++++++++++++++++++++++++++++++++++++++++++
include/hw/misc/imx7_gpr.h | 28 +++++++++++
3 files changed, 148 insertions(+)
create mode 100644 hw/misc/imx7_gpr.c
create mode 100644 include/hw/misc/imx7_gpr.h
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 019886912c..fce426eb75 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -36,6 +36,7 @@ obj-$(CONFIG_IMX) += imx6_src.o
obj-$(CONFIG_IMX) += imx7_ccm.o
obj-$(CONFIG_IMX) += imx2_wdt.o
obj-$(CONFIG_IMX) += imx7_snvs.o
+obj-$(CONFIG_IMX) += imx7_gpr.o
obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o
obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o
obj-$(CONFIG_MAINSTONE) += mst_fpga.o
diff --git a/hw/misc/imx7_gpr.c b/hw/misc/imx7_gpr.c
new file mode 100644
index 0000000000..9e8ccea9e8
--- /dev/null
+++ b/hw/misc/imx7_gpr.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 GPR IP block emulation code
+ *
+ * Author: Andrey Smirnov <andrew.smir...@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * Bare minimum emulation code needed to support being able to shut
+ * down linux guest gracefully.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/misc/imx7_gpr.h"
+#include "qemu/log.h"
+#include "sysemu/sysemu.h"
+
+enum IMX7GPRRegisters {
+ IOMUXC_GPR0 = 0x00,
+ IOMUXC_GPR1 = 0x04,
+ IOMUXC_GPR2 = 0x08,
+ IOMUXC_GPR3 = 0x0c,
+ IOMUXC_GPR4 = 0x10,
+ IOMUXC_GPR5 = 0x14,
+ IOMUXC_GPR6 = 0x18,
+ IOMUXC_GPR7 = 0x1c,
+ IOMUXC_GPR8 = 0x20,
+ IOMUXC_GPR9 = 0x24,
+ IOMUXC_GPR10 = 0x28,
+ IOMUXC_GPR11 = 0x2c,
+ IOMUXC_GPR12 = 0x30,
+ IOMUXC_GPR13 = 0x34,
+ IOMUXC_GPR14 = 0x38,
+ IOMUXC_GPR15 = 0x3c,
+ IOMUXC_GPR16 = 0x40,
+ IOMUXC_GPR17 = 0x44,
+ IOMUXC_GPR18 = 0x48,
+ IOMUXC_GPR19 = 0x4c,
+ IOMUXC_GPR20 = 0x50,
+ IOMUXC_GPR21 = 0x54,
+ IOMUXC_GPR22 = 0x58,
+};
+
+#define IMX7D_GPR1_IRQ_MASK BIT(12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK BIT(13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK BIT(14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK BIT(17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK BIT(18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI BIT(4)
+#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL BIT(5)
+#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED BIT(31)
+
+
+static uint64_t imx7_gpr_read(void *opaque, hwaddr offset, unsigned size)
+{
+ if (offset == IOMUXC_GPR22) {
+ return IMX7D_GPR22_PCIE_PHY_PLL_LOCKED;
+ }
+
+ return 0;
+}
+
+static void imx7_gpr_write(void *opaque, hwaddr offset,
+ uint64_t v, unsigned size)
+{
+}
+
+static const struct MemoryRegionOps imx7_gpr_ops = {
+ .read = imx7_gpr_read,
+ .write = imx7_gpr_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ /*
+ * Our device would not work correctly if the guest was doing
+ * unaligned access. This might not be a limitation on the
+ * real device but in practice there is no reason for a guest
+ * to access this device unaligned.
+ */
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void imx7_gpr_init(Object *obj)
+{
+ SysBusDevice *sd = SYS_BUS_DEVICE(obj);
+ IMX7GPRState *s = IMX7_GPR(obj);
+
+ memory_region_init_io(&s->mmio, obj, &imx7_gpr_ops, s,
+ TYPE_IMX7_GPR, 64 * 1024);
+ sysbus_init_mmio(sd, &s->mmio);
+}
+
+static void imx7_gpr_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "i.MX7 General Purpose Registers Module";
+}
+
+static const TypeInfo imx7_gpr_info = {
+ .name = TYPE_IMX7_GPR,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMX7GPRState),
+ .instance_init = imx7_gpr_init,
+ .class_init = imx7_gpr_class_init,
+};
+
+static void imx7_gpr_register_type(void)
+{
+ type_register_static(&imx7_gpr_info);
+}
+type_init(imx7_gpr_register_type)
diff --git a/include/hw/misc/imx7_gpr.h b/include/hw/misc/imx7_gpr.h
new file mode 100644
index 0000000000..e19373d274
--- /dev/null
+++ b/include/hw/misc/imx7_gpr.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 GPR IP block emulation code
+ *
+ * Author: Andrey Smirnov <andrew.smir...@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef IMX7_GPR_H
+#define IMX7_GPR_H
+
+#include "qemu/bitops.h"
+#include "hw/sysbus.h"
+
+#define TYPE_IMX7_GPR "imx7.gpr"
+#define IMX7_GPR(obj) OBJECT_CHECK(IMX7GPRState, (obj), TYPE_IMX7_GPR)
+
+typedef struct IMX7GPRState {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ MemoryRegion mmio;
+} IMX7GPRState;
+
+#endif /* IMX7_GPR_H */
--
2.14.3
