The current FIS printing routines dump the FIS to screen. adjust this
such that it dumps to buffer instead, then use this ability to have
FIS dump mechanisms via trace-events instead of compiled defines.
Signed-off-by: John Snow <js...@redhat.com>
---
hw/ide/ahci.c | 54 +++++++++++++++++++++++++++++++++++++++++++----------
hw/ide/trace-events | 3 +++
2 files changed, 47 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index c5a9b69..1a4d4db 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -644,20 +644,45 @@ static void ahci_reset_port(AHCIState *s, int port)
ahci_init_d2h(d);
}
-static void debug_print_fis(uint8_t *fis, int cmd_len)
+/* Buffer pretty output based on a raw FIS structure. */
+static void ahci_pretty_buffer_fis(uint8_t *fis, int cmd_len, char **out)
{
-#if DEBUG_AHCI
+ size_t bufsize;
+ char *pbuf;
+ char *pptr;
+ size_t lines = DIV_ROUND_UP(cmd_len, 16);
+ const char *preamble = "FIS:";
int i;
- fprintf(stderr, "fis:");
+ /* Total amount of memory to store FISes in HBA memory */
+ g_assert_cmpint(cmd_len, <=, 0x100);
+ g_assert(out);
+
+ /* Printed like:
+ * FIS:\n
+ * 0x00: 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee \n
+ * 0x10: ff \n
+ * \0
+ *
+ * Four bytes for the preamble, seven for each line prefix (including a
+ * newline to start a new line), three bytes for each source byte,
+ * a trailing newline and a terminal null byte.
+ */
+
+ bufsize = strlen(preamble) + ((6 + 1) * lines) + (3 * cmd_len) + 1 + 1;
+ pbuf = g_malloc(bufsize);
+ pptr = pbuf;
+ pptr += sprintf(pptr, "%s", preamble);
for (i = 0; i < cmd_len; i++) {
if ((i & 0xf) == 0) {
- fprintf(stderr, "\n%02x:",i);
+ pptr += sprintf(pptr, "\n0x%02x: ", i);
}
- fprintf(stderr, "%02x ",fis[i]);
+ pptr += sprintf(pptr, "%02x ", fis[i]);
}
- fprintf(stderr, "\n");
-#endif
+ pptr += sprintf(pptr, "\n");
+ pptr += 1; /* \0 */
+ g_assert(pbuf + bufsize == pptr);
+ *out = pbuf;
}
static bool ahci_map_fis_address(AHCIDevice *ad)
@@ -1201,7 +1226,12 @@ static void handle_reg_h2d_fis(AHCIState *s, int port,
* table to ide_state->io_buffer */
if (opts & AHCI_CMD_ATAPI) {
memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
- debug_print_fis(ide_state->io_buffer, 0x10);
+ if (TRACE_HANDLE_REG_H2D_FIS_DUMP_ENABLED) {
+ char *pretty_fis;
+ ahci_pretty_buffer_fis(ide_state->io_buffer, 0x10, &pretty_fis);
+ trace_handle_reg_h2d_fis_dump(s, port, pretty_fis);
+ g_free(pretty_fis);
+ }
s->dev[port].done_atapi_packet = false;
/* XXX send PIO setup FIS */
}
@@ -1256,8 +1286,12 @@ static int handle_cmd(AHCIState *s, int port, uint8_t
slot)
trace_handle_cmd_badmap(s, port, cmd_len);
goto out;
}
- debug_print_fis(cmd_fis, 0x80);
-
+ if (TRACE_HANDLE_CMD_FIS_DUMP_ENABLED) {
+ char *pretty_fis;
+ ahci_pretty_buffer_fis(cmd_fis, 0x80, &pretty_fis);
+ trace_handle_cmd_fis_dump(s, port, pretty_fis);
+ g_free(pretty_fis);
+ }
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
handle_reg_h2d_fis(s, port, slot, cmd_fis);
diff --git a/hw/ide/trace-events b/hw/ide/trace-events
index 5b321e1..082e804 100644
--- a/hw/ide/trace-events
+++ b/hw/ide/trace-events
@@ -103,3 +103,6 @@ ahci_reset(void *s) "ahci(%p): HBA reset"
allwinner_ahci_mem_read(void *s, void *a, uint64_t addr, uint64_t val,
unsigned size) "ahci(%p): read a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64",
size=%d"
allwinner_ahci_mem_write(void *s, void *a, uint64_t addr, uint64_t val,
unsigned size) "ahci(%p): write a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64",
size=%d"
+# Warning: Verbose
+handle_reg_h2d_fis_dump(void *s, int port, char *fis) "ahci(%p)[%d]: %s"
+handle_cmd_fis_dump(void *s, int port, char *fis) "ahci(%p)[%d]: %s"
--
2.9.4
