On Fri, Feb 17, 2017 at 10:18:35AM -0700, Alex Williamson wrote:
> On Tue, 7 Feb 2017 16:28:02 +0800
> Peter Xu <pet...@redhat.com> wrote:
>
> > This is v7 of vt-d vfio enablement series.
> [snip]
> > =========
> > Test Done
> > =========
> >
> > Build test passed for x86_64/arm/ppc64.
> >
> > Simply tested with x86_64, assigning two PCI devices to a single VM,
> > boot the VM using:
> >
> > bin=x86_64-softmmu/qemu-system-x86_64
> > $bin -M q35,accel=kvm,kernel-irqchip=split -m 1G \
> > -device intel-iommu,intremap=on,eim=off,caching-mode=on \
> > -netdev user,id=net0,hostfwd=tcp::5555-:22 \
> > -device virtio-net-pci,netdev=net0 \
> > -device vfio-pci,host=03:00.0 \
> > -device vfio-pci,host=02:00.0 \
> > -trace events=".trace.vfio" \
> > /var/lib/libvirt/images/vm1.qcow2
> >
> > pxdev:bin [vtd-vfio-enablement]# cat .trace.vfio
> > vtd_page_walk*
> > vtd_replay*
> > vtd_inv_desc*
> >
> > Then, in the guest, run the following tool:
> >
> >
> > https://github.com/xzpeter/clibs/blob/master/gpl/userspace/vfio-bind-group/vfio-bind-group.c
> >
> > With parameter:
> >
> > ./vfio-bind-group 00:03.0 00:04.0
> >
> > Check host side trace log, I can see pages are replayed and mapped in
> > 00:04.0 device address space, like:
> >
> > ...
> > vtd_replay_ce_valid replay valid context device 00:04.00 hi 0x401 lo
> > 0x38fe1001
> > vtd_page_walk Page walk for ce (0x401, 0x38fe1001) iova range 0x0 -
> > 0x8000000000
> > vtd_page_walk_level Page walk (base=0x38fe1000, level=3) iova range 0x0 -
> > 0x8000000000
> > vtd_page_walk_level Page walk (base=0x35d31000, level=2) iova range 0x0 -
> > 0x40000000
> > vtd_page_walk_level Page walk (base=0x34979000, level=1) iova range 0x0 -
> > 0x200000
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x0 -> gpa
> > 0x22dc3000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x1000 -> gpa
> > 0x22e25000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x2000 -> gpa
> > 0x22e12000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x3000 -> gpa
> > 0x22e2d000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x4000 -> gpa
> > 0x12a49000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x5000 -> gpa
> > 0x129bb000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x6000 -> gpa
> > 0x128db000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x7000 -> gpa
> > 0x12a80000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x8000 -> gpa
> > 0x12a7e000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0x9000 -> gpa
> > 0x12b22000 mask 0xfff perm 3
> > vtd_page_walk_one Page walk detected map level 0x1 iova 0xa000 -> gpa
> > 0x12b41000 mask 0xfff perm 3
> > ...
>
> Hi Peter,
>
> I'm trying to make use of this, with your vtd-vfio-enablement-v7 branch
> (HEAD 0c1c4e738095). I'm assigning an 82576 PF to a VM. It works with
> iommu=pt, but if I remove that option, the device does not work and
> vfio_iommu_map_notify is never called. Any suggestions? My
> commandline is below. Thanks,
>
> Alex
>
> /usr/local/bin/qemu-system-x86_64 \
> -name guest=l1,debug-threads=on -S \
> -machine
> pc-q35-2.9,accel=kvm,usb=off,dump-guest-core=off,kernel-irqchip=split \
> -cpu host -m 10240 -realtime mlock=off -smp
> 4,sockets=1,cores=2,threads=2 \
> -no-user-config -nodefaults -monitor stdio -rtc
> base=utc,driftfix=slew \
> -global kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown \
> -global ICH9-LPC.disable_s3=1 -global ICH9-LPC.disable_s4=1 \
> -boot strict=on \
> -device ioh3420,port=0x10,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \
> -device i82801b11-bridge,id=pci.2,bus=pcie.0,addr=0x1e \
> -device pci-bridge,chassis_nr=3,id=pci.3,bus=pci.2,addr=0x0 \
> -device ioh3420,port=0x18,chassis=4,id=pci.4,bus=pcie.0,addr=0x3 \
> -device ioh3420,port=0x20,chassis=5,id=pci.5,bus=pcie.0,addr=0x4 \
> -device ioh3420,port=0x28,chassis=6,id=pci.6,bus=pcie.0,addr=0x5 \
> -device ioh3420,port=0x30,chassis=7,id=pci.7,bus=pcie.0,addr=0x6 \
> -device ioh3420,port=0x38,chassis=8,id=pci.8,bus=pcie.0,addr=0x7 \
> -device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x1d.0x7 \
> -device
> ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x1d
> \
> -device
> ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x1d.0x1 \
> -device
> ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x1d.0x2 \
> -device virtio-serial-pci,id=virtio-serial0,bus=pci.4,addr=0x0 \
> -drive
> file=/dev/vg_s20/lv_l1,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native
> \
> -device
> virtio-blk-pci,scsi=off,bus=pci.5,addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
> \
> -netdev user,id=hostnet0 \
> -device
> virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:c2:62:30,bus=pci.1,addr=0x0
> \
> -device usb-tablet,id=input0,bus=usb.0,port=1 \
> -vnc :0 -vga std \
> -device vfio-pci,host=01:00.0,id=hostdev0,bus=pci.8,addr=0x0 \
> -device intel-iommu,intremap=on,eim=off,caching-mode=on -trace
> events=/trace-events.txt -msg timestamp=on
Alex,
Thanks for testing this series.
I think I reproduced it using my 10g nic as well. What I got is:
[ 23.724787] ixgbe 0000:01:00.0 enp1s0: Detected Tx Unit Hang
[ 23.724787] Tx Queue <0>
[ 23.724787] TDH, TDT <0>, <1>
[ 23.724787] next_to_use <1>
[ 23.724787] next_to_clean <0>
[ 23.724787] tx_buffer_info[next_to_clean]
[ 23.724787] time_stamp <fffbb8bb>
[ 23.724787] jiffies <fffbc780>
[ 23.729580] ixgbe 0000:01:00.0 enp1s0: tx hang 1 detected on queue 0,
resetting adapter
[ 23.730752] ixgbe 0000:01:00.0 enp1s0: initiating reset due to tx timeout
[ 23.731768] ixgbe 0000:01:00.0 enp1s0: Reset adapter
Is this the problem you have encountered? (adapter continuously reset)
Interestingly, I found that the problem solves itself after I move the
"-device intel-iommu,..." line before all the other devices.
Or say, this will be the much shorter reproducer meet the bug:
$qemu -machine q35,accel=kvm,kernel-irqchip=split \
-cpu host -smp 4 -m 2048 \
-nographic -nodefaults -serial stdio \
-device vfio-pci,host=05:00.0,bus=pci.1 \
-device intel-iommu,intremap=on,eim=off,caching-mode=on \
/images/fedora-25.qcow2
While this may possibly be okay at least on my host (switching the
order of the two devices):
$qemu -machine q35,accel=kvm,kernel-irqchip=split \
-cpu host -smp 4 -m 2048 \
-nographic -nodefaults -serial stdio \
-device intel-iommu,intremap=on,eim=off,caching-mode=on \
-device vfio-pci,host=05:00.0,bus=pci.1 \
/images/fedora-25.qcow2
So not sure how the ordering of realization of these two devices
(intel-iommu, vfio-pci) affected the behavior. One thing I suspect is
that in vfio_realize(), we have:
group = vfio_get_group(groupid, pci_device_iommu_address_space(pdev), errp);
while here we possibly will be getting &address_space_memory here
instead of the correct DMA address space since Intel IOMMU device has
not yet been inited...
Before I go deeper, any thoughts?
Thanks,
-- peterx
