On 06/10/2016 05:03, David Gibson wrote:
> The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
> for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
> and PAPR guests) to have numerous independent PHBs, each controlling a
> separate PCI domain.
>
> There are two ways of configuring the spapr-pci-host-bridge device: first
> it can be done fully manually, specifying the locations and sizes of all
> the IO windows. This gives the most control, but is very awkward with 6
> mandatory parameters. Alternatively just an "index" can be specified
> which essentially selects from an array of predefined PHB locations.
> The PHB at index 0 is automatically created as the default PHB.
>
> The current set of default locations causes some problems for guests with
> large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
> GPGPU cards via VFIO). Obviously, for migration we can only change the
> locations on a new machine type, however.
>
> This is awkward, because the placement is currently decided within the
> spapr-pci-host-bridge code, so it breaks abstraction to look inside the
> machine type version.
>
> So, this patch delegates the "default mode" PHB placement from the
> spapr-pci-host-bridge device back to the machine type via a public method
> in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
> can do.
>
> For now, this just changes where the calculation is done. It doesn't
> change the actual location of the host bridges, or any other behaviour.
>
> Signed-off-by: David Gibson <da...@gibson.dropbear.id.au>
> ---
> hw/ppc/spapr.c | 34 ++++++++++++++++++++++++++++++++++
> hw/ppc/spapr_pci.c | 22 ++++++++--------------
> include/hw/pci-host/spapr.h | 11 +----------
> include/hw/ppc/spapr.h | 4 ++++
> 4 files changed, 47 insertions(+), 24 deletions(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 03e3803..f6e9c2a 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -2370,6 +2370,39 @@ static HotpluggableCPUList
> *spapr_query_hotpluggable_cpus(MachineState *machine)
> return head;
> }
>
> +static void spapr_phb_placement(sPAPRMachineState *spapr, uint32_t index,
> + uint64_t *buid, hwaddr *pio, hwaddr
> *pio_size,
> + hwaddr *mmio, hwaddr *mmio_size,
> + unsigned n_dma, uint32_t *liobns, Error
> **errp)
> +{
> + const uint64_t base_buid = 0x800000020000000ULL;
> + const hwaddr phb0_base = 0x10000000000ULL; /* 1 TiB */
> + const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
> + const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
> + const hwaddr pio_offset = 0x80000000; /* 2 GiB */
> + const uint32_t max_index = 255;
> +
> + hwaddr phb_base;
> + int i;
> +
> + if (index > max_index) {
> + error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
> + max_index);
> + return;
> + }
> +
> + *buid = base_buid + index;
> + for (i = 0; i < n_dma; ++i) {
> + liobns[i] = SPAPR_PCI_LIOBN(index, i);
> + }
> +
> + phb_base = phb0_base + index * phb_spacing;
> + *pio = phb_base + pio_offset;
> + *pio_size = SPAPR_PCI_IO_WIN_SIZE;
> + *mmio = phb_base + mmio_offset;
> + *mmio_size = SPAPR_PCI_MMIO_WIN_SIZE;
> +}
> +
> static void spapr_machine_class_init(ObjectClass *oc, void *data)
> {
> MachineClass *mc = MACHINE_CLASS(oc);
> @@ -2406,6 +2439,7 @@ static void spapr_machine_class_init(ObjectClass *oc,
> void *data)
> mc->query_hotpluggable_cpus = spapr_query_hotpluggable_cpus;
> fwc->get_dev_path = spapr_get_fw_dev_path;
> nc->nmi_monitor_handler = spapr_nmi;
> + smc->phb_placement = spapr_phb_placement;
> }
>
> static const TypeInfo spapr_machine_info = {
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 4f00865..c0fc964 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -1311,7 +1311,8 @@ static void spapr_phb_realize(DeviceState *dev, Error
> **errp)
> sphb->ddw_enabled ? SPAPR_PCI_DMA_MAX_WINDOWS : 1;
>
> if (sphb->index != (uint32_t)-1) {
> - hwaddr windows_base;
> + sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
> + Error *local_err = NULL;
>
> if ((sphb->buid != (uint64_t)-1) || (sphb->dma_liobn[0] !=
> (uint32_t)-1)
> || (sphb->dma_liobn[1] != (uint32_t)-1 && windows_supported == 2)
> @@ -1322,21 +1323,14 @@ static void spapr_phb_realize(DeviceState *dev, Error
> **errp)
> return;
> }
>
> - if (sphb->index > SPAPR_PCI_MAX_INDEX) {
> - error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
> - SPAPR_PCI_MAX_INDEX);
> + smc->phb_placement(spapr, sphb->index,
> + &sphb->buid, &sphb->io_win_addr,
> &sphb->io_win_size,
> + &sphb->mem_win_addr, &sphb->mem_win_size,
> + windows_supported, sphb->dma_liobn, &local_err);
Why don't you pass "sphb" instead of "&sphb->buid, &sphb->io_win_addr,
&sphb->io_win_size, &sphb->mem_win_addr, &sphb->mem_win_size,
sphb->dma_liobn"?
Something like:
smc->phb_placement(spapr, sphb, windows_supported, &local_err);
Thanks,
Laurent
