From: "Dr. David Alan Gilbert" <dgilb...@redhat.com>
QEMU sets the guests physical address bits to 40; this is wrong
on most hardware, and can be detected by the guest.
It also stops you using really huge multi-TB VMs.
Red Hat has had a patch, that Andrea wrote, downstream for a couple
of years that reads the hosts value and uses that in the guest. That's
correct as far as the guest sees it, and lets you create huge VMs.
The downside, is that if you've got a mix of hosts, say an i7 and a Xeon,
life gets complicated in migration; prior to 2.6 it all apparently
worked (although a guest that looked might spot the change).
In 2.6 Paolo started checking MSR writes and they failed when the
incoming MTRR mask didn't fit.
This series:
a) Fixes up mtrr masks so that if you're migrating between hosts
of different physical address size it tries to do something sensible.
b) Lets you specify the guest physical address size via a CPU property, i.e.
-cpu SandyBridge,phys-bits=36
The default is still to use the existing 40 bits value.
c) Lets you tell qemu to use the same setting as the host, i.e.
-cpu SandyBridge,host-phys-bits
(This overrides phys-bits)
d) Warns if the host physical bits don't match a value specified with
phys-bits
Note that mixed size hosts are still not necessarily safe; a guest
started on a host with a large physical address size might start using
those bits and get upset when it's moved to a small host.
However that was already potentially broken in existing qemu that
used a magic value of 40.
There's potential to add some extra guards against people
doing silly stuff; e.g. stop people running VMs using 1TB of
address space on a tiny host.
Dave
v4
Provide TCG_PHYS_ADDR_BITS constants
use separate boolean for getting the host bits
Now use the magic 0 to mean default no. of bits
Split out cpuid code into x86_host_phys_bits
Dr. David Alan Gilbert (5):
x86: Provide TCG_PHYS_ADDR_BITS
x86: Allow physical address bits to be set
x86: Mask mtrr mask based on CPU physical address limits
x86: fill high bits of mtrr mask
x86: Set physical address bits based on host
include/hw/i386/pc.h | 5 +++
target-i386/cpu.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++-----
target-i386/cpu.h | 15 +++++++-
target-i386/kvm.c | 39 +++++++++++++++++--
4 files changed, 152 insertions(+), 14 deletions(-)
--
2.7.4
