Set kernel_irqchip_type according to value of the option and pass it
around where necessary. Instantiate devices and fdt nodes according
to the choice.
max_cpus for virt machine increased to 64. GICv2 compatibility check
happens inside arm_gic_common_realize().
Signed-off-by: Pavel Fedin <p.fe...@samsung.com>
---
hw/arm/virt.c | 137 ++++++++++++++++++++++++++++++++++++++++++--------
include/hw/arm/fdt.h | 2 +-
include/hw/arm/virt.h | 6 ++-
3 files changed, 121 insertions(+), 24 deletions(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 30d9ab8..6eb525d 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -48,6 +48,7 @@
#include "hw/arm/sysbus-fdt.h"
#include "hw/platform-bus.h"
#include "hw/arm/fdt.h"
+#include "qapi/visitor.h"
/* Number of external interrupt lines to configure the GIC with */
#define NUM_IRQS 256
@@ -106,7 +107,12 @@ static const MemMapEntry a15memmap[] = {
/* GIC distributor and CPU interfaces sit inside the CPU peripheral space
*/
[VIRT_GIC_DIST] = { 0x08000000, 0x00010000 },
[VIRT_GIC_CPU] = { 0x08010000, 0x00010000 },
- [VIRT_GIC_V2M] = { 0x08020000, 0x00001000 },
+ [VIRT_GIC_V2M] = { 0x08020000, 0x00010000 },
+ /* On v3 VIRT_GIC_DIST_MBI and VIRT_ITS_CONTROL take place of
+ * VIRT_GIC_CPU and VIRT_GIC_V2M respectively
+ */
+ [VIRT_ITS_TRANSLATION] = { 0x08030000, 0x00010000 },
+ [VIRT_LPI] = { 0x08040000, 0x00800000 },
[VIRT_UART] = { 0x09000000, 0x00001000 },
[VIRT_RTC] = { 0x09010000, 0x00001000 },
[VIRT_FW_CFG] = { 0x09020000, 0x0000000a },
@@ -256,10 +262,13 @@ static void fdt_add_timer_nodes(const VirtBoardInfo *vbi)
* they are edge-triggered.
*/
ARMCPU *armcpu;
+ uint32_t max;
uint32_t irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI;
+ /* Argument is 32 bit but 8 bits are reserved for flags */
+ max = (vbi->smp_cpus >= 24) ? 24 : vbi->smp_cpus;
irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
- GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vbi->smp_cpus) - 1);
+ GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << max) - 1);
qemu_fdt_add_subnode(vbi->fdt, "/timer");
@@ -283,6 +292,18 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
{
int cpu;
+ /*
+ * From Documentation/devicetree/bindings/arm/cpus.txt
+ * On ARM v8 64-bit systems value should be set to 2,
+ * that corresponds to the MPIDR_EL1 register size.
+ * If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
+ * in the system, #address-cells can be set to 1, since
+ * MPIDR_EL1[63:32] bits are not used for CPUs
+ * identification.
+ *
+ * Now GIC500 doesn't support affinities 2 & 3 so currently
+ * #address-cells can stay 1 until future GIC
+ */
qemu_fdt_add_subnode(vbi->fdt, "/cpus");
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#size-cells", 0x0);
@@ -319,25 +340,36 @@ static void fdt_add_v2m_gic_node(VirtBoardInfo *vbi)
qemu_fdt_setprop_cell(vbi->fdt, "/intc/v2m", "phandle", vbi->v2m_phandle);
}
-static void fdt_add_gic_node(VirtBoardInfo *vbi)
+static void fdt_add_gic_node(VirtBoardInfo *vbi, int type)
{
vbi->gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt);
qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", vbi->gic_phandle);
qemu_fdt_add_subnode(vbi->fdt, "/intc");
- /* 'cortex-a15-gic' means 'GIC v2' */
- qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
- "arm,cortex-a15-gic");
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#interrupt-cells", 3);
qemu_fdt_setprop(vbi->fdt, "/intc", "interrupt-controller", NULL, 0);
- qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
- 2, vbi->memmap[VIRT_GIC_DIST].base,
- 2, vbi->memmap[VIRT_GIC_DIST].size,
- 2, vbi->memmap[VIRT_GIC_CPU].base,
- 2, vbi->memmap[VIRT_GIC_CPU].size);
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#address-cells", 0x2);
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#size-cells", 0x2);
qemu_fdt_setprop(vbi->fdt, "/intc", "ranges", NULL, 0);
+ if (type == KVM_DEV_TYPE_ARM_VGIC_V3) {
+ qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
+ "arm,gic-v3");
+ qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
+ 2, vbi->memmap[VIRT_GIC_DIST].base,
+ 2, vbi->memmap[VIRT_GIC_DIST].size,
+ 2, vbi->memmap[VIRT_LPI].base,
+ 2, vbi->memmap[VIRT_LPI].size);
+ } else {
+ /* 'cortex-a15-gic' means 'GIC v2' */
+ qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
+ "arm,cortex-a15-gic");
+ qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
+ 2, vbi->memmap[VIRT_GIC_DIST].base,
+ 2, vbi->memmap[VIRT_GIC_DIST].size,
+ 2, vbi->memmap[VIRT_GIC_CPU].base,
+ 2, vbi->memmap[VIRT_GIC_CPU].size);
+ }
+
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle);
}
@@ -360,20 +392,35 @@ static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic)
fdt_add_v2m_gic_node(vbi);
}
-static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
+static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic, int type)
{
/* We create a standalone GIC v2 */
DeviceState *gicdev;
SysBusDevice *gicbusdev;
- const char *gictype = "arm_gic";
+ const char *gictype;
int i;
- if (kvm_irqchip_in_kernel()) {
- gictype = "kvm-arm-gic";
+ if (type == KVM_DEV_TYPE_ARM_VGIC_V3) {
+ /* TODO: Software emulation is not implemented yet */
+ if (!kvm_irqchip_in_kernel()) {
+ fprintf(stderr, "KVM is currently required for GICv3 emulation\n");
+ exit(1);
+ }
+ gictype = "kvm-arm-gicv3";
+ } else {
+ gictype = kvm_irqchip_in_kernel() ? "kvm-arm-gic" : "arm_gic";
}
gicdev = qdev_create(NULL, gictype);
- qdev_prop_set_uint32(gicdev, "revision", 2);
+
+ for (i = 0; i < vbi->smp_cpus; i++) {
+ CPUState *cpu = qemu_get_cpu(i);
+ CPUARMState *env = cpu->env_ptr;
+ env->nvic = gicdev;
+ }
+
+ qdev_prop_set_uint32(gicdev, "revision",
+ type == KVM_DEV_TYPE_ARM_VGIC_V3 ? 3 : 2);
qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
/* Note that the num-irq property counts both internal and external
* interrupts; there are always 32 of the former (mandated by GIC spec).
@@ -382,7 +429,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
qdev_init_nofail(gicdev);
gicbusdev = SYS_BUS_DEVICE(gicdev);
sysbus_mmio_map(gicbusdev, 0, vbi->memmap[VIRT_GIC_DIST].base);
- sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
+ if (type == KVM_DEV_TYPE_ARM_VGIC_V3) {
+ sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_LPI].base);
+ } else {
+ sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
+ }
/* Wire the outputs from each CPU's generic timer to the
* appropriate GIC PPI inputs, and the GIC's IRQ output to
@@ -409,9 +460,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
pic[i] = qdev_get_gpio_in(gicdev, i);
}
- fdt_add_gic_node(vbi);
+ fdt_add_gic_node(vbi, type);
- create_v2m(vbi, pic);
+ if (type == KVM_DEV_TYPE_ARM_VGIC_V2) {
+ create_v2m(vbi, pic);
+ }
}
static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic)
@@ -715,7 +768,10 @@ static void create_pcie(const VirtBoardInfo *vbi, qemu_irq
*pic)
qemu_fdt_setprop_cells(vbi->fdt, nodename, "bus-range", 0,
nr_pcie_buses - 1);
- qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent", vbi->v2m_phandle);
+ if (vbi->v2m_phandle) {
+ qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent",
+ vbi->v2m_phandle);
+ }
qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
2, base_ecam, 2, size_ecam);
@@ -875,7 +931,7 @@ static void machvirt_init(MachineState *machine)
create_flash(vbi);
- create_gic(vbi, pic);
+ create_gic(vbi, pic, machine->kernel_irqchip_type);
create_uart(vbi, pic);
@@ -933,6 +989,37 @@ static void virt_set_secure(Object *obj, bool value, Error
**errp)
vms->secure = value;
}
+static void virt_get_gic_version(Object *obj, Visitor *v, void *opaque,
+ const char *name, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ int32_t value = (ms->kernel_irqchip_type == KVM_DEV_TYPE_ARM_VGIC_V3) ?
+ 3 : 2;
+
+ visit_type_int32(v, &value, name, errp);
+}
+
+static void virt_set_gic_version(Object *obj, Visitor *v, void *opaque,
+ const char *name, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ int32_t value;
+
+ visit_type_int32(v, &value, name, errp);
+
+ switch (value) {
+ case 3:
+ ms->kernel_irqchip_type = QEMU_GIC_TYPE_V3;
+ break;
+ case 2:
+ ms->kernel_irqchip_type = QEMU_GIC_TYPE_V2;
+ break;
+ default:
+ error_report("Only GICv2 and GICv3 supported currently\n");
+ exit(1);
+ }
+}
+
static void virt_instance_init(Object *obj)
{
VirtMachineState *vms = VIRT_MACHINE(obj);
@@ -948,6 +1035,11 @@ static void virt_instance_init(Object *obj)
/* Default GIC type is v2 */
vms->parent.kernel_irqchip_type = QEMU_GIC_TYPE_V2;
+ object_property_add(obj, "gicversion", "int", virt_get_gic_version,
+ virt_set_gic_version, NULL, NULL, NULL);
+ object_property_set_description(obj, "gicversion",
+ "Set GIC version. "
+ "Valid values are 2 and 3", NULL);
}
static void virt_class_init(ObjectClass *oc, void *data)
@@ -957,7 +1049,8 @@ static void virt_class_init(ObjectClass *oc, void *data)
mc->name = TYPE_VIRT_MACHINE;
mc->desc = "ARM Virtual Machine",
mc->init = machvirt_init;
- mc->max_cpus = 8;
+ /* With gic3 full implementation (with bitops) rase the lmit to 128 */
+ mc->max_cpus = 64;
mc->has_dynamic_sysbus = true;
mc->block_default_type = IF_VIRTIO;
mc->no_cdrom = 1;
diff --git a/include/hw/arm/fdt.h b/include/hw/arm/fdt.h
index c3d5015..dd794dd 100644
--- a/include/hw/arm/fdt.h
+++ b/include/hw/arm/fdt.h
@@ -29,6 +29,6 @@
#define GIC_FDT_IRQ_FLAGS_LEVEL_LO 8
#define GIC_FDT_IRQ_PPI_CPU_START 8
-#define GIC_FDT_IRQ_PPI_CPU_WIDTH 8
+#define GIC_FDT_IRQ_PPI_CPU_WIDTH 24
#endif
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index d22fd8e..852efb9 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -46,6 +46,11 @@ enum {
VIRT_CPUPERIPHS,
VIRT_GIC_DIST,
VIRT_GIC_CPU,
+ VIRT_GIC_V2M,
+ VIRT_GIC_DIST_MBI = VIRT_GIC_CPU,
+ VIRT_ITS_CONTROL = VIRT_GIC_V2M,
+ VIRT_ITS_TRANSLATION,
+ VIRT_LPI,
VIRT_UART,
VIRT_MMIO,
VIRT_RTC,
@@ -54,7 +59,6 @@ enum {
VIRT_PCIE_MMIO,
VIRT_PCIE_PIO,
VIRT_PCIE_ECAM,
- VIRT_GIC_V2M,
VIRT_PLATFORM_BUS,
};
--
1.9.5.msysgit.0
