On Wed, Jul 1, 2015 at 10:56 PM, Antony Pavlov <antonynpav...@gmail.com> wrote: > On Tue, 30 Jun 2015 21:12:34 -0700 > Serge Vakulenko <serge.vakule...@gmail.com> wrote: > >> Signed-off-by: Serge Vakulenko <serge.vakule...@gmail.com> >> --- >> hw/mips/Makefile.objs | 3 + >> hw/mips/mips_pic32mx7.c | 1652 +++++++++++++++++++++++++ >> hw/mips/mips_pic32mz.c | 2840 >> +++++++++++++++++++++++++++++++++++++++++++ >> hw/mips/pic32_ethernet.c | 557 +++++++++ >> hw/mips/pic32_gpio.c | 39 + >> hw/mips/pic32_load_hex.c | 238 ++++ >> hw/mips/pic32_peripherals.h | 210 ++++ >> hw/mips/pic32_sdcard.c | 428 +++++++ >> hw/mips/pic32_spi.c | 121 ++ >> hw/mips/pic32_uart.c | 228 ++++ >> hw/mips/pic32mx.h | 1290 ++++++++++++++++++++ >> hw/mips/pic32mz.h | 2093 +++++++++++++++++++++++++++++++ >> 12 files changed, 9699 insertions(+) >> create mode 100644 hw/mips/mips_pic32mx7.c >> create mode 100644 hw/mips/mips_pic32mz.c >> create mode 100644 hw/mips/pic32_ethernet.c >> create mode 100644 hw/mips/pic32_gpio.c >> create mode 100644 hw/mips/pic32_load_hex.c >> create mode 100644 hw/mips/pic32_peripherals.h >> create mode 100644 hw/mips/pic32_sdcard.c >> create mode 100644 hw/mips/pic32_spi.c >> create mode 100644 hw/mips/pic32_uart.c >> create mode 100644 hw/mips/pic32mx.h >> create mode 100644 hw/mips/pic32mz.h >> >> diff --git a/hw/mips/Makefile.objs b/hw/mips/Makefile.objs >> index 9633f3a..dcbaec9 100644 >> --- a/hw/mips/Makefile.objs >> +++ b/hw/mips/Makefile.objs >> @@ -3,3 +3,6 @@ obj-y += addr.o cputimer.o mips_int.o >> obj-$(CONFIG_JAZZ) += mips_jazz.o >> obj-$(CONFIG_FULONG) += mips_fulong2e.o >> obj-y += gt64xxx_pci.o >> +obj-y += mips_pic32mz.o mips_pic32mx7.o >> +obj-y += pic32_load_hex.o pic32_sdcard.o pic32_spi.o pic32_uart.o >> pic32_gpio.o >> +obj-y += pic32_ethernet.o > > Can we move mips-unrelated stuff to the appropriate dirs? > E.g. pic32_gpio.c can to go to hw/gpio.
All these files are pic32-related. They depend on pic32_t data structure declared in pic32_peripherals.h and register definitions in pic32mx.h and pic32mz.h. I see no point to move them around. > Also please use separate patch for every peripheral controller (see > Aurelien's comment). Agreed. >> diff --git a/hw/mips/mips_pic32mx7.c b/hw/mips/mips_pic32mx7.c >> new file mode 100644 >> index 0000000..1d8ffb5 >> --- /dev/null >> +++ b/hw/mips/mips_pic32mx7.c >> @@ -0,0 +1,1652 @@ >> +/* >> + * QEMU support for Microchip PIC32MX7 microcontroller. >> + * >> + * Copyright (c) 2015 Serge Vakulenko >> + * >> + * Permission is hereby granted, free of charge, to any person obtaining a >> copy >> + * of this software and associated documentation files (the "Software"), to >> deal >> + * in the Software without restriction, including without limitation the >> rights >> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell >> + * copies of the Software, and to permit persons to whom the Software is >> + * furnished to do so, subject to the following conditions: >> + * >> + * The above copyright notice and this permission notice shall be included >> in >> + * all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS >> OR >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL >> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR >> OTHER >> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> FROM, >> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN >> + * THE SOFTWARE. >> + */ >> + >> +/* Only 32-bit little endian mode supported. */ >> +#include "config.h" >> +#if !defined TARGET_MIPS64 && !defined TARGET_WORDS_BIGENDIAN > > Please don't use C preprocessor directive for conditional compilation of the > whole file. > Use Makefile instead. See CONFIG_FULONG for example (fulong2e is > mips64le-only). Makes sense. Thanks, --Serge > -- > Best regards, > Antony Pavlov