On Thu, Mar 19, 2015 at 09:01:27AM +0800, Chen, Tiejun wrote:
> On 2015/3/18 18:21, Gerd Hoffmann wrote:
> >On Mi, 2015-03-18 at 17:06 +0800, Tiejun Chen wrote:
> >>Implement a pci host bridge specific to passthrough. Actually
> >>this just inherits the standard one. And we also just expose
> >>a minimal real host bridge pci configuration subset.
> >
> >>+/* Here we just expose minimal host bridge offset subset. */
> >>+static const IGDHostInfo igd_host_bridge_infos[] = {
> >>+ {0x08, 2}, /* revision id */
> >>+ {0x2c, 2}, /* sybsystem vendor id */
> >>+ {0x2e, 2}, /* sybsystem id */
> >>+ {0x50, 2}, /* SNB: processor graphics control register */
> >>+ {0x52, 2}, /* processor graphics control register */
> >>+ {0xa4, 4}, /* SNB: graphics base of stolen memory */
> >>+ {0xa8, 4}, /* SNB: base of GTT stolen memory */
> >>+};
> >
> >Hmm, no vendor/device id here? Will the idg guest drivers happily read
>
> These two emulated values are already fine.
>
> And this is a long story. At the beginning, we were initially trying to
> expose more,
>
> + case 0x00: /* vendor id */
> + case 0x02: /* device id */
> + case 0x08: /* revision id */
> + case 0x2c: /* sybsystem vendor id */
> + case 0x2e: /* sybsystem id */
> + case 0x50: /* SNB: processor graphics control register */
> + case 0x52: /* processor graphics control register */
> + case 0xa0: /* top of memory */
> + case 0xb0: /* ILK: BSM: should read from dev 2 offset 0x5c */
> + case 0x58: /* SNB: PAVPC Offset */
> + case 0xa4: /* SNB: graphics base of stolen memory */
> + case 0xa8: /* SNB: base of GTT stolen memory */
>
> But this brought some discussions with Paolo and Michael, and then plus our
> further experiment, now as everyone expect, this is a minimal real host
> bridge pci configuration subset which we need to expose.
>
> >graphics control registers from i440fx even though this chipset never
> >existed in a igd variant?
> >
> >[ just wondering, if it works that way fine, it certainly makes things
>
> Yes, it works fine.
>
> > easier for the firmware which uses host bridge pci id to figure
> > whenever it is running @ i440fx or q35 ].
> >
> >>+static int igd_pt_i440fx_initfn(struct PCIDevice *pci_dev)
> >>+{
> >>+ uint32_t val = 0;
> >>+ int rc, i, num;
> >>+ int pos, len;
> >>+
> >>+ num = ARRAY_SIZE(igd_host_bridge_infos);
> >>+ for (i = 0; i < num; i++) {
> >>+ pos = igd_host_bridge_infos[i].offset;
> >>+ len = igd_host_bridge_infos[i].len;
> >>+ rc = host_pci_config_read(pos, len, val);
> >>+ if (rc) {
> >>+ return -ENODEV;
> >>+ }
> >>+ pci_default_write_config(pci_dev, pos, val, len);
> >>+ }
> >>+
> >>+ return 0;
> >>+}
> >
> >Nothing i440fx specific in here, just copying some host bridge pci
> >config space bits. I guess we can sub-class the q35 host bridge the
> >same way and even reuse the init function?
>
> This is our another discussion long time ago :)
>
> Currently Xen don't run with q35. If I remember those discussions correctly,
> something is still restricted to Windows.
>
> >
> >>+#define TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE "xen-igd-passthrough-i440FX"
> >
> >One xen leftover slipped through here.
>
> Fixed.
So should I expect v8 then?
> Thanks
> Tiejun
