On Thu, Jun 05, 2025 at 11:42:23PM +0000, anisa.su...@gmail.com wrote:
> From: Anisa Su <anisa...@samsung.com>
>
> FM DCD Managment command 0x5605 implemented per CXL r3.2 Spec Section
> 7.6.7.6.6
>
> Signed-off-by: Anisa Su <anisa...@samsung.com>
See below ..
> ---
> hw/cxl/cxl-mailbox-utils.c | 62 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 7ee5be00bc..6c57e0deac 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -124,6 +124,7 @@ enum {
> #define SET_DC_REGION_CONFIG 0x2
> #define GET_DC_REGION_EXTENT_LIST 0x3
> #define INITIATE_DC_ADD 0x4
> + #define INITIATE_DC_RELEASE 0x5
> };
>
> /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3685,6 +3686,60 @@ static CXLRetCode cmd_fm_initiate_dc_add(const struct
> cxl_cmd *cmd,
> return CXL_MBOX_SUCCESS;
> }
>
> +#define CXL_EXTENT_REMOVAL_POLICY_MASK 0x7
> +/* CXL r3.2 Section 7.6.7.6.6 Initiate Dynamic Capacity Release (Opcode
> 5605h) */
> +static CXLRetCode cmd_fm_initiate_dc_release(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + struct {
> + uint16_t host_id;
> + uint8_t flags;
> + uint8_t reg_num;
> + uint64_t length;
> + uint8_t tag[0x10];
> + uint32_t ext_count;
> + CXLDCExtentRaw extents[];
> + } QEMU_PACKED *in = (void *)payload_in;
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + CXLUpdateDCExtentListInPl *list;
> + CXLDCExtentList updated_list;
> + uint32_t updated_list_size;
> + int rc;
> +
> + switch (in->flags & CXL_EXTENT_REMOVAL_POLICY_MASK) {
> + case CXL_EXTENT_REMOVAL_POLICY_PRESCRIPTIVE:
> + list = calloc(1, (sizeof(*list) +
> + in->ext_count * sizeof(*list->updated_entries)));
Use g_malloc() and free with g_free();
> + convert_raw_extents(in->extents, list, in->ext_count);
> + rc = cxl_detect_malformed_extent_list(ct3d, list);
> + if (rc) {
> + return rc;
> + }
> + rc = cxl_dc_extent_release_dry_run(ct3d,
> + list,
> + &updated_list,
> + &updated_list_size);
This seems not right.
this is only fm issue dc release request, not host release dc extents to device.
So we should follow what we did in the
qmp_cxl_process_dynamic_capacity_prescriptive()
for release case.
One thing that I can see that making the workflow is different is that, we check
the extent list with the pending list to make sure fm is not trying to remove
non-accepted extents, but the host release extent workflow does not need to do
that as it is filtered out in the first place when fm sends the request if it is
from FM.
I have to admit, existing qmp interface can be improved to remove some condition
checks as they are kind of duplicate.
For example, if an extent is still pending, it will not be set in the bitmap, so
we can still tigger the error if it happens by removing the pending list check.
One justification is that the error message is different for a non-existing
extent and a pending extent, which is useful for a dmp interface.
Also, the case to detect exhausted resouces is not different, FM can request to
release a lot of extents, but what the host actually does can be a subset or
none.
Fan
> + if (rc) {
> + return rc;
> + }
> + cxl_mbox_create_dc_event_records_for_extents(ct3d,
> +
> DC_EVENT_RELEASE_CAPACITY,
> + in->extents,
> + in->ext_count);
> + return CXL_MBOX_SUCCESS;
> + default:
> + qemu_log_mask(LOG_UNIMP,
> + "CXL extent selection policy not supported.\n");
> + return CXL_MBOX_INVALID_INPUT;
> + }
> +
> + return CXL_MBOX_SUCCESS;
> +}
> +
> static const struct cxl_cmd cxl_cmd_set[256][256] = {
> [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
> cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3819,6 +3874,13 @@ static const struct cxl_cmd
> cxl_cmd_set_fm_dcd[256][256] = {
> CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> + [FMAPI_DCD_MGMT][INITIATE_DC_RELEASE] = { "INIT_DC_RELEASE",
> + cmd_fm_initiate_dc_release, ~0,
> + (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> + CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> + CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> };
>
> /*
> --
> 2.47.2
>
