On Thu, Jun 05, 2025 at 11:42:22PM +0000, anisa.su...@gmail.com wrote:
> From: Anisa Su <anisa...@samsung.com>
>
> FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section
> 7.6.7.6.5
>
> Signed-off-by: Anisa Su <anisa...@samsung.com>
See below...
> ---
> hw/cxl/cxl-mailbox-utils.c | 152 ++++++++++++++++++++++++++++++++++++
> hw/mem/cxl_type3.c | 8 +-
> include/hw/cxl/cxl_device.h | 4 +
> 3 files changed, 160 insertions(+), 4 deletions(-)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 004e502b22..7ee5be00bc 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -123,6 +123,7 @@ enum {
> #define GET_HOST_DC_REGION_CONFIG 0x1
> #define SET_DC_REGION_CONFIG 0x2
> #define GET_DC_REGION_EXTENT_LIST 0x3
> + #define INITIATE_DC_ADD 0x4
> };
>
> /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3540,6 +3541,150 @@ static CXLRetCode
> cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
> return CXL_MBOX_SUCCESS;
> }
>
> +static void cxl_mbox_dc_add_to_pending(CXLType3Dev *ct3d,
This naming can be improved here, not straightforward to me.
Maybe cxl_add_extents_to_pending_list() ?
> + uint32_t ext_count,
> + CXLDCExtentRaw extents[])
> +{
> + CXLDCExtentGroup *group = NULL;
> + int i;
> +
> + for (i = 0; i < ext_count; i++) {
> + group = cxl_insert_extent_to_extent_group(group,
> + extents[i].start_dpa,
> + extents[i].len,
> + extents[i].tag,
> + extents[i].shared_seq);
> + }
> +
> + cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
> + ct3d->dc.total_extent_count += ext_count;
> +}
Also the code is duplicate with existing code in cxl_type3.c
qmp_cxl_process_dynamic_capacity_prescriptive().
The function was simulating the behaviour of the mailbox command, so it is
behaviour will be smilar to what we have in this patch,
find a way to reuse code, maybe extract common code as a helper function and use
it in both qmp interface and here.
> +
> +static void cxl_mbox_create_dc_event_records_for_extents(CXLType3Dev *ct3d,
cxl_create_dc_extent_records_for extents()?
> + CXLDCEventType type,
> + CXLDCExtentRaw
> extents[],
> + uint32_t ext_count)
> +{
> + CXLEventDynamicCapacity event_rec = {};
> + int i;
> +
> + cxl_assign_event_header(&event_rec.hdr,
> + &dynamic_capacity_uuid,
> + (1 << CXL_EVENT_TYPE_INFO),
> + sizeof(event_rec),
> + cxl_device_get_timestamp(&ct3d->cxl_dstate));
> + event_rec.type = type;
> + event_rec.validity_flags = 1;
> + event_rec.host_id = 0;
> + event_rec.updated_region_id = 0;
> + event_rec.extents_avail = CXL_NUM_EXTENTS_SUPPORTED -
> + ct3d->dc.total_extent_count;
> +
> + for (i = 0; i < ext_count; i++) {
> + memcpy(&event_rec.dynamic_capacity_extent,
> + &extents[i],
> + sizeof(CXLDCExtentRaw));
> + event_rec.flags = 0;
> + if (i < ext_count - 1) {
> + /* Set "More" flag */
> + event_rec.flags |= BIT(0);
> + }
> +
> + if (cxl_event_insert(&ct3d->cxl_dstate,
> + CXL_EVENT_TYPE_DYNAMIC_CAP,
> + (CXLEventRecordRaw *)&event_rec)) {
> + cxl_event_irq_assert(ct3d);
> + }
> + }
> +}
Some issue here. A lot of duplicate code compared to
qmp_cxl_process_dynamic_capacity_prescriptive.
> +
> +/*
> + * Helper function to convert CXLDCExtentRaw to CXLUpdateDCExtentListInPl
> + * in order to reuse cxl_detect_malformed_extent_list() functin which accepts
> + * CXLUpdateDCExtentListInPl as a parameter.
> + */
> +static void convert_raw_extents(CXLDCExtentRaw raw_extents[],
> + CXLUpdateDCExtentListInPl *extent_list,
> + int count)
> +{
> + int i;
> +
> + extent_list->num_entries_updated = count;
> +
> + for (i = 0; i < count; i++) {
> + extent_list->updated_entries[i].start_dpa = raw_extents[i].start_dpa;
> + extent_list->updated_entries[i].len = raw_extents[i].len;
> + }
> +}
> +
> +/* CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h) */
> +static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + struct {
> + uint16_t host_id;
> + uint8_t selection_policy;
> + uint8_t reg_num;
> + uint64_t length;
> + uint8_t tag[0x10];
> + uint32_t ext_count;
> + CXLDCExtentRaw extents[];
> + } QEMU_PACKED *in = (void *)payload_in;
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + CXLUpdateDCExtentListInPl *list;
> + int i, rc;
> +
> + switch (in->selection_policy) {
> + case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE:
> + /* Adding extents exceeds device's extent tracking ability. */
> + if (in->ext_count + ct3d->dc.total_extent_count >
> + CXL_NUM_EXTENTS_SUPPORTED) {
> + return CXL_MBOX_RESOURCES_EXHAUSTED;
> + }
> +
> + list = calloc(1, (sizeof(*list) +
> + in->ext_count * sizeof(*list->updated_entries)));
Use g_malloc() and g_free().
> + convert_raw_extents(in->extents, list, in->ext_count);
> + rc = cxl_detect_malformed_extent_list(ct3d, list);
> +
> + for (i = 0; i < in->ext_count; i++) {
> + CXLDCExtentRaw ext = in->extents[i];
> + /* Check requested extents do not overlap with pending extents.
> */
> + if
> (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
> + ext.start_dpa,
> ext.len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + /* Check requested extents do not overlap with existing extents.
> */
> + if (cxl_extents_overlaps_dpa_range(&ct3d->dc.extents,
> + ext.start_dpa, ext.len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + }
> +
> + if (rc) {
> + return rc;
> + }
> +
> + cxl_mbox_dc_add_to_pending(ct3d, in->ext_count, in->extents);
> + cxl_mbox_create_dc_event_records_for_extents(ct3d,
> + DC_EVENT_ADD_CAPACITY,
> + in->extents,
> + in->ext_count);
> +
> + return CXL_MBOX_SUCCESS;
> + default:
> + qemu_log_mask(LOG_UNIMP,
> + "CXL extent selection policy not supported.\n");
> + return CXL_MBOX_INVALID_INPUT;
> + }
> +
For all the case to return, instead of return directly set return code and jump
here, do two things:
1. g_free(list);
2. return rt;
Fan
> + return CXL_MBOX_SUCCESS;
> +}
> +
> static const struct cxl_cmd cxl_cmd_set[256][256] = {
> [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
> cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3667,6 +3812,13 @@ static const struct cxl_cmd
> cxl_cmd_set_fm_dcd[256][256] = {
> CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> [FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = {
> "GET_DC_REGION_EXTENT_LIST",
> cmd_fm_get_dc_region_extent_list, 12, 0 },
> + [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
> + cmd_fm_initiate_dc_add, ~0,
> + (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> + CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> + CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> };
>
> /*
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index ee554a77be..ca9fe89e4f 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -1885,8 +1885,8 @@ void qmp_cxl_inject_memory_module_event(const char
> *path, CxlEventLog log,
> * the list.
> * Return value: return true if has overlaps; otherwise, return false
> */
> -static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtent *ent;
> Range range1, range2;
> @@ -1931,8 +1931,8 @@ bool cxl_extents_contains_dpa_range(CXLDCExtentList
> *list,
> return false;
> }
>
> -static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtentGroup *group;
>
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 76af75d2d0..d30f6503fa 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -724,4 +724,8 @@ bool ct3_test_region_block_backed(CXLType3Dev *ct3d,
> uint64_t dpa,
> void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> const QemuUUID *uuid, uint32_t flags,
> uint8_t length, uint64_t timestamp);
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len);
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len);
> #endif
> --
> 2.47.2
>
