Easier on the eyes and for grep. Signed-off-by: Markus Armbruster <arm...@redhat.com> Message-ID: <20250527073916.1243024-5-arm...@redhat.com> Reviewed-by: Eric Blake <ebl...@redhat.com> --- qapi/block-core.json | 56 ++++++++++++++++++++++---------------------- qapi/introspect.json | 4 ++-- qapi/job.json | 12 +++++----- qapi/machine.json | 4 ++-- qapi/migration.json | 36 ++++++++++++++-------------- qapi/net.json | 12 +++++----- qapi/run-state.json | 4 ++-- qapi/ui.json | 4 ++-- 8 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json index 0700bd3d46..cc48fc7122 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -31,8 +31,8 @@ # @icount: Current instruction count. Appears when execution # record/replay is enabled. Used for "time-traveling" to match # the moment in the recorded execution with the snapshots. This -# counter may be obtained through @query-replay command (since -# 5.2) +# counter may be obtained through @query-replay command +# (since 5.2) # # Since: 1.3 ## @@ -510,11 +510,11 @@ # # @bps_max: total throughput limit during bursts, in bytes (Since 1.7) # -# @bps_rd_max: read throughput limit during bursts, in bytes (Since -# 1.7) +# @bps_rd_max: read throughput limit during bursts, in bytes +# (Since 1.7) # -# @bps_wr_max: write throughput limit during bursts, in bytes (Since -# 1.7) +# @bps_wr_max: write throughput limit during bursts, in bytes +# (Since 1.7) # # @iops_max: total I/O operations per second during bursts, in bytes # (Since 1.7) @@ -951,11 +951,11 @@ # @unmap_operations: The number of unmap operations performed by the # device (Since 4.2) # -# @rd_total_time_ns: Total time spent on reads in nanoseconds (since -# 0.15). +# @rd_total_time_ns: Total time spent on reads in nanoseconds +# (since 0.15) # -# @wr_total_time_ns: Total time spent on writes in nanoseconds (since -# 0.15). +# @wr_total_time_ns: Total time spent on writes in nanoseconds +# (since 0.15) # # @zone_append_total_time_ns: Total time spent on zone append writes # in nanoseconds (since 8.1) @@ -1502,15 +1502,15 @@ # # @device: the name of the device to take a snapshot of. # -# @node-name: graph node name to generate the snapshot from (Since -# 2.0) +# @node-name: graph node name to generate the snapshot from +# (Since 2.0) # # @snapshot-file: the target of the new overlay image. If the file # exists, or if it is a device, the overlay will be created in the # existing file/device. Otherwise, a new file will be created. # -# @snapshot-node-name: the graph node name of the new image (Since -# 2.0) +# @snapshot-node-name: the graph node name of the new image +# (Since 2.0) # # @format: the format of the overlay image, default is 'qcow2'. # @@ -1785,8 +1785,8 @@ # If top == base, that is an error. If top has no overlays on top of # it, or if it is in use by a writer, the job will not be completed by # itself. The user needs to complete the job with the -# block-job-complete command after getting the ready event. (Since -# 2.0) +# block-job-complete command after getting the ready event. +# (Since 2.0) # # If the base image is smaller than top, then the base image will be # resized to be the same size as top. If top is smaller than the base @@ -2169,8 +2169,8 @@ # @format: the format of the new destination, default is to probe if # @mode is 'existing', else the format of the source # -# @node-name: the new block driver state node name in the graph (Since -# 2.1) +# @node-name: the new block driver state node name in the graph +# (Since 2.1) # # @replaces: with sync=full graph node name to be replaced by the new # image when a whole image copy is done. This can be used to @@ -2593,11 +2593,11 @@ # # @bps_max: total throughput limit during bursts, in bytes (Since 1.7) # -# @bps_rd_max: read throughput limit during bursts, in bytes (Since -# 1.7) +# @bps_rd_max: read throughput limit during bursts, in bytes +# (Since 1.7) # -# @bps_wr_max: write throughput limit during bursts, in bytes (Since -# 1.7) +# @bps_wr_max: write throughput limit during bursts, in bytes +# (Since 1.7) # # @iops_max: total I/O operations per second during bursts, in bytes # (Since 1.7) @@ -3655,8 +3655,8 @@ # this feature. (since 2.5) # # @encrypt: Image decryption options. Mandatory for encrypted images, -# except when doing a metadata-only probe of the image. (since -# 2.10) +# except when doing a metadata-only probe of the image. +# (since 2.10) # # @data-file: reference to or definition of the external data file. # This may only be specified for images that require an external @@ -4326,8 +4326,8 @@ # @user: Ceph id name. # # @auth-client-required: Acceptable authentication modes. This maps -# to Ceph configuration option "auth_client_required". (Since -# 3.0) +# to Ceph configuration option "auth_client_required". +# (Since 3.0) # # @key-secret: ID of a QCryptoSecret object providing a key for cephx # authentication. This maps to Ceph configuration option "key". @@ -4581,8 +4581,8 @@ # error. During the first @reconnect-delay seconds, all requests # are paused and will be rerun on a successful reconnect. After # that time, any delayed requests and all future requests before a -# successful reconnect will immediately fail. Default 0 (Since -# 4.2) +# successful reconnect will immediately fail. Default 0 +# (Since 4.2) # # @open-timeout: In seconds. If zero, the nbd driver tries the # connection only once, and fails to open if the connection fails. diff --git a/qapi/introspect.json b/qapi/introspect.json index 01bb242947..95724ee2d2 100644 --- a/qapi/introspect.json +++ b/qapi/introspect.json @@ -154,8 +154,8 @@ # # Additional SchemaInfo members for meta-type 'enum'. # -# @members: the enum type's members, in no particular order (since -# 6.2). +# @members: the enum type's members, in no particular order. +# (since 6.2) # # @values: the enumeration type's member names, in no particular # order. Redundant with @members. Just for backward diff --git a/qapi/job.json b/qapi/job.json index c53c96cce8..9ddba537db 100644 --- a/qapi/job.json +++ b/qapi/job.json @@ -20,14 +20,14 @@ # # @create: image creation job type, see "blockdev-create" (since 3.0) # -# @amend: image options amend job type, see "x-blockdev-amend" (since -# 5.1) +# @amend: image options amend job type, see "x-blockdev-amend" +# (since 5.1) # -# @snapshot-load: snapshot load job type, see "snapshot-load" (since -# 6.0) +# @snapshot-load: snapshot load job type, see "snapshot-load" +# (since 6.0) # -# @snapshot-save: snapshot save job type, see "snapshot-save" (since -# 6.0) +# @snapshot-save: snapshot save job type, see "snapshot-save" +# (since 6.0) # # @snapshot-delete: snapshot delete job type, see "snapshot-delete" # (since 6.0) diff --git a/qapi/machine.json b/qapi/machine.json index 069e87d16a..5eb67fc4e9 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -182,8 +182,8 @@ # @default-cpu-type: default CPU model typename if none is requested # via the -cpu argument. (since 4.2) # -# @default-ram-id: the default ID of initial RAM memory backend (since -# 5.2) +# @default-ram-id: the default ID of initial RAM memory backend +# (since 5.2) # # @acpi: machine type supports ACPI (since 8.0) # diff --git a/qapi/migration.json b/qapi/migration.json index 7c7b09c341..7d1ec06605 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -57,8 +57,8 @@ # # @dirty-sync-missed-zero-copy: Number of times dirty RAM # synchronization could not avoid copying dirty pages. This is -# between 0 and @dirty-sync-count * @multifd-channels. (since -# 7.1) +# between 0 and @dirty-sync-count * @multifd-channels. +# (since 7.1) # # Since: 0.14 ## @@ -137,16 +137,16 @@ # # @active: in the process of doing migration. # -# @postcopy-active: like active, but now in postcopy mode. (since -# 2.5) +# @postcopy-active: like active, but now in postcopy mode. +# (since 2.5) # # @postcopy-paused: during postcopy but paused. (since 3.0) # # @postcopy-recover-setup: setup phase for a postcopy recovery # process, preparing for a recovery phase to start. (since 9.1) # -# @postcopy-recover: trying to recover from a paused postcopy. (since -# 3.0) +# @postcopy-recover: trying to recover from a paused postcopy. +# (since 3.0) # # @completed: migration is finished. # @@ -422,8 +422,8 @@ # for precopy. (since 2.10) # # @pause-before-switchover: Pause outgoing migration before -# serialising device state and before disabling block IO (since -# 2.11) +# serialising device state and before disabling block IO +# (since 2.11) # # @multifd: Use more than one fd for migration (since 4.0) # @@ -697,8 +697,8 @@ # @alias: An alias name for migration (for example the bitmap name on # the opposite site). # -# @transform: Allows the modification of the migrated bitmap. (since -# 6.0) +# @transform: Allows the modification of the migrated bitmap. +# (since 6.0) # # Since: 5.2 ## @@ -770,8 +770,8 @@ # specified by @cpu-throttle-increment and the one generated by # ideal CPU percentage. Therefore, it is compatible to # traditional throttling, meanwhile the throttle increment won't -# be excessive at tail stage. The default value is false. (Since -# 5.1) +# be excessive at tail stage. The default value is false. +# (Since 5.1) # # @tls-creds: ID of the 'tls-creds' object that provides credentials # for establishing a TLS connection over the migration data @@ -951,8 +951,8 @@ # specified by @cpu-throttle-increment and the one generated by # ideal CPU percentage. Therefore, it is compatible to # traditional throttling, meanwhile the throttle increment won't -# be excessive at tail stage. The default value is false. (Since -# 5.1) +# be excessive at tail stage. The default value is false. +# (Since 5.1) # # @tls-creds: ID of the 'tls-creds' object that provides credentials # for establishing a TLS connection over the migration data @@ -1148,8 +1148,8 @@ # percentage. The default value is 50. (Since 5.0) # # @cpu-throttle-initial: Initial percentage of time guest cpus are -# throttled when migration auto-converge is activated. (Since -# 2.7) +# throttled when migration auto-converge is activated. +# (Since 2.7) # # @cpu-throttle-increment: throttle percentage increase each time # auto-converge detects that migration is not making progress. @@ -1165,8 +1165,8 @@ # specified by @cpu-throttle-increment and the one generated by # ideal CPU percentage. Therefore, it is compatible to # traditional throttling, meanwhile the throttle increment won't -# be excessive at tail stage. The default value is false. (Since -# 5.1) +# be excessive at tail stage. The default value is false. +# (Since 5.1) # # @tls-creds: ID of the 'tls-creds' object that provides credentials # for establishing a TLS connection over the migration data diff --git a/qapi/net.json b/qapi/net.json index e670efd6b0..97ea183981 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -154,8 +154,8 @@ # prefix is given in the usual hexadecimal IPv6 address notation. # (since 2.6) # -# @ipv6-prefixlen: IPv6 network prefix length (default is 64) (since -# 2.6) +# @ipv6-prefixlen: IPv6 network prefix length (default is 64) +# (since 2.6) # # @ipv6-host: guest-visible IPv6 address of the host (since 2.6) # @@ -387,8 +387,8 @@ # # @hubid: hub identifier number # -# @netdev: used to connect hub to a netdev instead of a device (since -# 2.12) +# @netdev: used to connect hub to a netdev instead of a device +# (since 2.12) # # Since: 1.2 ## @@ -510,8 +510,8 @@ # @queues: number of queues to be created for multiqueue vhost-vdpa # (default: 1) # -# @x-svq: Start device with (experimental) shadow virtqueue. (Since -# 7.1) (default: false) +# @x-svq: Start device with (experimental) shadow virtqueue. +# (Since 7.1) (default: false) # # Features: # diff --git a/qapi/run-state.json b/qapi/run-state.json index ee11adc508..ebfeb669ab 100644 --- a/qapi/run-state.json +++ b/qapi/run-state.json @@ -365,8 +365,8 @@ # @shutdown: Shutdown the VM and exit, according to the shutdown # action # -# @exit-failure: Shutdown the VM and exit with nonzero status (since -# 7.1) +# @exit-failure: Shutdown the VM and exit with nonzero status +# (since 7.1) # # Since: 6.0 ## diff --git a/qapi/ui.json b/qapi/ui.json index 3d0c853c9a..7cfedb3914 100644 --- a/qapi/ui.json +++ b/qapi/ui.json @@ -175,8 +175,8 @@ # @filename: the path of a new file to store the image # # @device: ID of the display device that should be dumped. If this -# parameter is missing, the primary display will be used. (Since -# 2.12) +# parameter is missing, the primary display will be used. +# (Since 2.12) # # @head: head to use in case the device supports multiple heads. If # this parameter is missing, head #0 will be used. Also note that -- 2.48.1
