Hi Rakesh,
On 29/3/25 01:49, rakeshj wrote:
The GT-64120 PCI controller requires special handling where:
1. Host bridge (device 0) must use native endianness
2. Other devices follow MByteSwap bit in GT_PCI0_CMD
Previous implementation accidentally swapped all accesses, breaking
host bridge detection (lspci -d 11ab:4620).
This patch:
- Adds custom read/write handlers to preserve native big-endian for the
host
bridge (phb->config_reg & 0x00fff800 == 0).
Here you check for bus == 0 && device == 0, is that what you want? (I'm
confused because you only describe "for the host bridge").
If so I'd rather add a self-describing method:
static bool is_phb_dev0(const PCIHostState *phb)
{
return extract32(phb->config_reg, 11, 5 /* dev */ + 8 /* bus) == 0;
}
- Swaps non-bridge devices when MByteSwap = 0, using size-appropriate swaps
(bswap16 for 2-byte, bswap32 for 4-byte) to convert PCI's little-endian
data
to match the MIPS guest's big-endian expectation; no swap occurs for the
host
bridge or when MByteSwap = 1 (little-endian mode).
- Removes gt64120_update_pci_cfgdata_mapping(), moving data_mem
initialization
to gt64120_realize()
- Removes unused pci_host_data_be_ops and a misleading comment in dino.h.
Fixes: 145e2198 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE
MemoryRegionOps")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2826
Signed-off-by: Rakesh Jeyasingh <rakeshjb...@gmail.com>
---
hw/pci-host/gt64120.c | 83 ++++++++++++++++++++++----------------
hw/pci/pci_host.c | 6 ---
include/hw/pci-host/dino.h | 5 +--
include/hw/pci/pci_host.h | 1 -
4 files changed, 50 insertions(+), 45 deletions(-)
diff --git a/hw/pci-host/gt64120.c b/hw/pci-host/gt64120.c
index d5c13a89b6..4e45d0aa53 100644
--- a/hw/pci-host/gt64120.c
+++ b/hw/pci-host/gt64120.c
@@ -320,38 +320,6 @@ static void gt64120_isd_mapping(GT64120State *s)
memory_region_transaction_commit();
}
-static void gt64120_update_pci_cfgdata_mapping(GT64120State *s)
-{
- /* Indexed on MByteSwap bit, see Table 158: PCI_0 Command, Offset:
0xc00 */
- static const MemoryRegionOps *pci_host_data_ops[] = {
- &pci_host_data_be_ops, &pci_host_data_le_ops
- };
- PCIHostState *phb = PCI_HOST_BRIDGE(s);
-
- memory_region_transaction_begin();
-
- /*
- * The setting of the MByteSwap bit and MWordSwap bit in the PCI
Internal
- * Command Register determines how data transactions from the CPU
to/from
- * PCI are handled along with the setting of the Endianness bit in the
CPU
- * Configuration Register. See:
- * - Table 16: 32-bit PCI Transaction Endianness
- * - Table 158: PCI_0 Command, Offset: 0xc00
- */
-
- if (memory_region_is_mapped(&phb->data_mem)) {
- memory_region_del_subregion(&s->ISD_mem, &phb->data_mem);
- object_unparent(OBJECT(&phb->data_mem));
- }
- memory_region_init_io(&phb->data_mem, OBJECT(phb),
- pci_host_data_ops[s->regs[GT_PCI0_CMD] & 1],
- s, "pci-conf-data", 4);
- memory_region_add_subregion_overlap(&s->ISD_mem, GT_PCI0_CFGDATA << 2,
- &phb->data_mem, 1);
-
- memory_region_transaction_commit();
-}
-
static void gt64120_pci_mapping(GT64120State *s)
{
memory_region_transaction_begin();
@@ -645,7 +613,6 @@ static void gt64120_writel(void *opaque, hwaddr addr,
case GT_PCI0_CMD:
case GT_PCI1_CMD:
s->regs[saddr] = val & 0x0401fc0f;
- gt64120_update_pci_cfgdata_mapping(s);
break;
case GT_PCI0_TOR:
case GT_PCI0_BS_SCS10:
@@ -1024,6 +991,49 @@ static const MemoryRegionOps isd_mem_ops = {
},
};
+static uint64_t gt64120_pci_data_read(void *opaque, hwaddr addr,
unsigned size)
+{
+ GT64120State *s = opaque;
+ PCIHostState *phb = PCI_HOST_BRIDGE(s);
+ uint32_t val = pci_data_read(phb->bus, phb->config_reg, size);
You check the Enable bit in the write path but not here, any reason?
+
+ /* Only swap for non-bridge devices in big-endian mode */
+ if (!(s->regs[GT_PCI0_CMD] & 1) && (phb->config_reg & 0x00fff800)) {
Please use instead of (s->regs[GT_PCI0_CMD] & 1):
bswap = FIELD_EX32(s->regs[GT_PCI0_CMD]m GT_PCI0_CMD, MByteSwap);
+ if (size == 2) {
+ val = bswap16(val);
+ } else if (size == 4) {
+ val = bswap32(val);
+ }
+ }
+ return val;
+}
+
+static void gt64120_pci_data_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ GT64120State *s = opaque;
+ PCIHostState *phb = PCI_HOST_BRIDGE(s);
+ if (!(s->regs[GT_PCI0_CMD] & 1) && (phb->config_reg & 0x00fff800)) {
+ if (size == 2) {
+ val = bswap16(val);
+ } else if (size == 4) {
+ val = bswap32(val);
+ }
+ }
+ if (phb->config_reg & (1u << 31))
+ pci_data_write(phb->bus, phb->config_reg | (addr & 3), val, size);
+}
+
+static const MemoryRegionOps gt64120_pci_data_ops = {
+ .read = gt64120_pci_data_read,
+ .write = gt64120_pci_data_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
Per GT64120 rev 1.4, chapter "6.2.2 PCI Master CPU Byte Swapping":
When the GT–64120 is configured for 64-bit PCI mode, byte
swapping occurs across all 8 byte lanes when the ByteSwap
bit is set for PCI_0.
static void gt64120_reset(DeviceState *dev)
{
GT64120State *s = GT64120_PCI_HOST_BRIDGE(dev);
@@ -1178,7 +1188,6 @@ static void gt64120_reset(DeviceState *dev)
gt64120_isd_mapping(s);
gt64120_pci_mapping(s);
- gt64120_update_pci_cfgdata_mapping(s);
}
static void gt64120_realize(DeviceState *dev, Error **errp)
@@ -1202,6 +1211,12 @@ static void gt64120_realize(DeviceState *dev, Error
**errp)
memory_region_add_subregion_overlap(&s->ISD_mem, GT_PCI0_CFGADDR <<
2,
&phb->conf_mem, 1);
+ memory_region_init_io(&phb->data_mem, OBJECT(phb),
+ >64120_pci_data_ops,
+ s, "pci-conf-data", 4);
+ memory_region_add_subregion_overlap(&s->ISD_mem, GT_PCI0_CFGDATA << 2,
+ &phb->data_mem, 1);
+
/*
* The whole address space decoded by the GT-64120A doesn't generate
Please split the changes below in a distinct cleanup patch.
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 80f91f409f..56f7f28a1a 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -217,12 +217,6 @@ const MemoryRegionOps pci_host_data_le_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
};
-const MemoryRegionOps pci_host_data_be_ops = {
- .read = pci_host_data_read,
- .write = pci_host_data_write,
- .endianness = DEVICE_BIG_ENDIAN,
-};
-
static bool pci_host_needed(void *opaque)
{
PCIHostState *s = opaque;
diff --git a/include/hw/pci-host/dino.h b/include/hw/pci-host/dino.h
index fd7975c798..df509dbc18 100644
--- a/include/hw/pci-host/dino.h
+++ b/include/hw/pci-host/dino.h
@@ -109,10 +109,7 @@ static const uint32_t reg800_keep_bits[DINO800_REGS] =
{
struct DinoState {
PCIHostState parent_obj;
- /*
- * PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
- * so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops.
- */
+
uint32_t config_reg_dino; /* keep original copy, including 2 lowest
bits */
uint32_t iar0;
diff --git a/include/hw/pci/pci_host.h b/include/hw/pci/pci_host.h
index e52d8ec2cd..954dd446fa 100644
--- a/include/hw/pci/pci_host.h
+++ b/include/hw/pci/pci_host.h
@@ -68,6 +68,5 @@ uint32_t pci_data_read(PCIBus *s, uint32_t addr, unsigned
len);
extern const MemoryRegionOps pci_host_conf_le_ops;
extern const MemoryRegionOps pci_host_conf_be_ops;
extern const MemoryRegionOps pci_host_data_le_ops;
-extern const MemoryRegionOps pci_host_data_be_ops;
#endif /* PCI_HOST_H */
