Li Zhijian via <qemu-devel@nongnu.org> writes:

> This qtest requires there is a RDMA(RoCE) link in the host.
> In order to make the test work smoothly, introduce a
> scripts/rdma-migration-helper.sh to
> - setup a new Soft-RoCE(aka RXE) if it's root
> - detect existing RoCE link
>
> Test will be skipped if there is no available RoCE link.
>  # Start of rdma tests
>  # Running /x86_64/migration/precopy/rdma/plain
>  ok 1 /x86_64/migration/precopy/rdma/plain # SKIP
>  There is no available rdma link to run RDMA migration test.
>  To enable the test:
>  (1) Run 'scripts/rdma-migration-helper.sh setup' with root and rerun the test

sudo scripts/rdma-migration-helper.sh setup
QTEST_QEMU_BINARY=./qemu-system-x86_64 ./tests/qtest/migration-test
--full -r /x86_64/migration/precopy/rdma/plain

# {
#     "error": {
#         "class": "GenericError",
#         "desc": "RDMA ERROR: rdma migration: error registering 0 control!"
#     }
# }

>  or
>  (2) Run the test with root privilege

This one works fine.

>
>  # End of rdma tests
>
> Reviewed-by: Peter Xu <pet...@redhat.com>
> Signed-off-by: Li Zhijian <lizhij...@fujitsu.com>
> ---
>  MAINTAINERS                           |  1 +
>  scripts/rdma-migration-helper.sh      | 41 +++++++++++++++++
>  tests/qtest/migration/precopy-tests.c | 64 +++++++++++++++++++++++++++
>  3 files changed, 106 insertions(+)
>  create mode 100755 scripts/rdma-migration-helper.sh
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3848d37a38d..15360fcdc4b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3480,6 +3480,7 @@ R: Li Zhijian <lizhij...@fujitsu.com>
>  R: Peter Xu <pet...@redhat.com>
>  S: Odd Fixes
>  F: migration/rdma*
> +F: scripts/rdma-migration-helper.sh
>  
>  Migration dirty limit and dirty page rate
>  M: Hyman Huang <yong.hu...@smartx.com>
> diff --git a/scripts/rdma-migration-helper.sh 
> b/scripts/rdma-migration-helper.sh
> new file mode 100755
> index 00000000000..66557d9e267
> --- /dev/null
> +++ b/scripts/rdma-migration-helper.sh
> @@ -0,0 +1,41 @@
> +#!/bin/bash
> +

I'd prefer a command -v rdma check around here. With the way the script
pipes commands into one another will cause bash to emit a couple of
"rdma: command not found" in case rdma command is not present.

> +# Copied from blktests
> +get_ipv4_addr()
> +{
> +    ip -4 -o addr show dev "$1" |
> +        sed -n 's/.*[[:blank:]]inet[[:blank:]]*\([^[:blank:]/]*\).*/\1/p' |
> +        tr -d '\n'
> +}
> +
> +has_soft_rdma()
> +{
> +    rdma link | grep -q " netdev $1[[:blank:]]*\$"
> +}
> +
> +rdma_rxe_setup_detect()
> +{
> +    (
> +        cd /sys/class/net &&
> +            for i in *; do
> +                [ -e "$i" ] || continue
> +                [ "$i" = "lo" ] && continue
> +                [ "$(<"$i/addr_len")" = 6 ] || continue
> +                [ "$(<"$i/carrier")" = 1 ] || continue
> +
> +                has_soft_rdma "$i" && break
> +                [ "$operation" = "setup" ] &&
> +                    rdma link add "${i}_rxe" type rxe netdev "$i" && break
> +            done
> +        has_soft_rdma "$i" || return
> +        get_ipv4_addr "$i"
> +    )
> +}
> +
> +operation=${1:-setup}
> +
> +if [ "$operation" == "setup" ] || [ "$operation" == "detect" ]; then
> +    rdma_rxe_setup_detect
> +else
> +    echo "Usage: $0 [setup | detect]"
> +fi

What happened to the cleanup option? I think I missed some discussion on
this... We can't expect people to know how to clean this up without any
hint.

> diff --git a/tests/qtest/migration/precopy-tests.c 
> b/tests/qtest/migration/precopy-tests.c
> index ba273d10b9a..bf97f4e9325 100644
> --- a/tests/qtest/migration/precopy-tests.c
> +++ b/tests/qtest/migration/precopy-tests.c
> @@ -99,6 +99,66 @@ static void test_precopy_unix_dirty_ring(void)
>      test_precopy_common(&args);
>  }
>  
> +#ifdef CONFIG_RDMA
> +
> +#define RDMA_MIGRATION_HELPER "scripts/rdma-migration-helper.sh"
> +static int new_rdma_link(char *buffer)
> +{
> +    const char *argument = (geteuid() == 0) ? "setup" : "detect";
> +    char cmd[1024];
> +
> +    snprintf(cmd, sizeof(cmd), "%s %s", RDMA_MIGRATION_HELPER, argument);
> +
> +    FILE *pipe = popen(cmd, "r");

This needs to be silenced, otherwise messages from the script will break
TAP output. I suggest:

    bool verbose = g_getenv("QTEST_LOG");

    snprintf(cmd, sizeof(cmd), "%s %s %s", RDMA_MIGRATION_HELPER, argument,
             verbose ? "" : "2>/dev/null");

> +    if (pipe == NULL) {
> +        perror("Failed to run script");
> +        return -1;
> +    }
> +
> +    int idx = 0;
> +    while (fgets(buffer + idx, 128 - idx, pipe) != NULL) {
> +        idx += strlen(buffer);
> +    }
> +
> +    int status = pclose(pipe);
> +    if (status == -1) {
> +        perror("Error reported by pclose()");
> +        return -1;
> +    } else if (WIFEXITED(status)) {
> +        return WEXITSTATUS(status);
> +    }
> +
> +    return -1;
> +}
> +
> +static void test_precopy_rdma_plain(void)
> +{
> +    char buffer[128] = {};
> +
> +    if (new_rdma_link(buffer)) {
> +        g_test_skip("\nThere is no available rdma link to run RDMA migration 
> test.\n"
> +                    "To enable the test:\n"
> +                    "(1) Run \'" RDMA_MIGRATION_HELPER " setup\' with root 
> and rerun the test\n"
> +                    "or\n"
> +                    "(2) Run the test with root privilege\n");

g_test_skip() needs a one-line message, otherwise it breaks TAP
output. You can turn this into a g_test_message(), put it under
QTEST_LOG=1 and add a g_test_skip("no rdma link available") below.

> +        return;
> +    }
> +
> +    /*
> +     * TODO: query a free port instead of hard code.
> +     * 29200=('R'+'D'+'M'+'A')*100
> +     **/
> +    g_autofree char *uri = g_strdup_printf("rdma:%s:29200", buffer);
> +
> +    MigrateCommon args = {
> +        .listen_uri = uri,
> +        .connect_uri = uri,
> +    };
> +
> +    test_precopy_common(&args);
> +}
> +#endif
> +
>  static void test_precopy_tcp_plain(void)
>  {
>      MigrateCommon args = {
> @@ -1124,6 +1184,10 @@ static void 
> migration_test_add_precopy_smoke(MigrationTestEnv *env)
>                         test_multifd_tcp_uri_none);
>      migration_test_add("/migration/multifd/tcp/plain/cancel",
>                         test_multifd_tcp_cancel);
> +#ifdef CONFIG_RDMA
> +    migration_test_add("/migration/precopy/rdma/plain",
> +                       test_precopy_rdma_plain);
> +#endif
>  }
>  
>  void migration_test_add_precopy(MigrationTestEnv *env)

Reply via email to