On Tue, 11 Feb 2025 10:24:13 +0800
Yuquan Wang <wangyuquan1...@phytium.com.cn> wrote:
> The previous default value of sn is UI64_NULL which would cause the
> cookie of nd_interleave_set be '0' and the "invalid interleave-set
> -cookie" failure in label validation.
Hi Yuquan,
Maybe we should harden the nd_interleave_set code to fail
to set the cookie in the event of no serial number. That is a
device not compliant with the spec, but none the less it is not
implausible with test devices etc.
>
> As many users maybe not know how to set a unique sn for cxl-type3
> device and perhaps be confuesd by the failure of label validation,
> so this defines '1' as the default value of serial number to fix the
> problem.
That magic value is specifically chosen to be 'undefined' to trigger
clean handling of the failure and not provide the serial number
capability.
If you have multiple devices and provide a 'valid' default then
there are circumstances in which the device will be seen as a multiheaded
single device attached to two places in the PCI topology.
So I'm not keen to change this. Ideally we'd have made this a required
parameter from the start, but we didn't and doing so now would result
in a backwards compatibility problem.
So I think this is kind of a 'won't fix' situation on the qemu side.
Jonathan
>
> Signed-off-by: Yuquan Wang <wangyuquan1...@phytium.com.cn>
> ---
> hw/mem/cxl_type3.c | 17 ++++-------------
> 1 file changed, 4 insertions(+), 13 deletions(-)
>
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 0ae1704a34..a6b5a9f74e 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -310,12 +310,6 @@ static void ct3d_config_write(PCIDevice *pci_dev,
> uint32_t addr, uint32_t val,
> pcie_aer_write_config(pci_dev, addr, val, size);
> }
>
> -/*
> - * Null value of all Fs suggested by IEEE RA guidelines for use of
> - * EU, OUI and CID
> - */
> -#define UI64_NULL ~(0ULL)
> -
> static void build_dvsecs(CXLType3Dev *ct3d)
> {
> CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
> @@ -856,12 +850,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
> pci_config_set_prog_interface(pci_conf, 0x10);
>
> pcie_endpoint_cap_init(pci_dev, 0x80);
> - if (ct3d->sn != UI64_NULL) {
> - pcie_dev_ser_num_init(pci_dev, 0x100, ct3d->sn);
> - cxl_cstate->dvsec_offset = 0x100 + 0x0c;
> - } else {
> - cxl_cstate->dvsec_offset = 0x100;
> - }
> +
> + pcie_dev_ser_num_init(pci_dev, 0x100, ct3d->sn);
> + cxl_cstate->dvsec_offset = 0x100 + 0x0c;
>
> ct3d->cxl_cstate.pdev = pci_dev;
> build_dvsecs(ct3d);
> @@ -1225,7 +1216,7 @@ static const Property ct3_props[] = {
> TYPE_MEMORY_BACKEND, HostMemoryBackend *),
> DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND,
> HostMemoryBackend *),
> - DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL),
> + DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, 0x1),
> DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename),
> DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0),
> DEFINE_PROP_LINK("volatile-dc-memdev", CXLType3Dev, dc.host_dc,
