[PATCH 03/36] next-cube: remove overlap between next.dma and next.mmio memory regions

[Mark Cave-Ayland]

Change the start of the next.mmio memory region so that it follows on directly
after the next.dma memory region, adjusting the address offsets in
next_mmio_read() and next_mmio_write() accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
---
 hw/m68k/next-cube.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c
index 4e8e55a8bd..e1d94c1ce0 100644
--- a/hw/m68k/next-cube.c
+++ b/hw/m68k/next-cube.c
@@ -266,23 +266,23 @@ static uint64_t next_mmio_read(void *opaque, hwaddr addr, 
unsigned size)
     uint64_t val;
 
     switch (addr) {
-    case 0x7000:
+    case 0x2000:
         /* DPRINTF("Read INT status: %x\n", s->int_status); */
         val = s->int_status;
         break;
 
-    case 0x7800:
+    case 0x2800:
         DPRINTF("MMIO Read INT mask: %x\n", s->int_mask);
         val = s->int_mask;
         break;
 
-    case 0xc000 ... 0xc003:
-        val = extract32(s->scr1, (4 - (addr - 0xc000) - size) << 3,
+    case 0x7000 ... 0x7003:
+        val = extract32(s->scr1, (4 - (addr - 0x7000) - size) << 3,
                         size << 3);
         break;
 
-    case 0xd000 ... 0xd003:
-        val = extract32(s->scr2, (4 - (addr - 0xd000) - size) << 3,
+    case 0x8000 ... 0x8003:
+        val = extract32(s->scr2, (4 - (addr - 0x8000) - size) << 3,
                         size << 3);
         break;
 
@@ -301,25 +301,25 @@ static void next_mmio_write(void *opaque, hwaddr addr, 
uint64_t val,
     NeXTPC *s = NEXT_PC(opaque);
 
     switch (addr) {
-    case 0x7000:
+    case 0x2000:
         DPRINTF("INT Status old: %x new: %x\n", s->int_status,
                 (unsigned int)val);
         s->int_status = val;
         break;
 
-    case 0x7800:
+    case 0x2800:
         DPRINTF("INT Mask old: %x new: %x\n", s->int_mask, (unsigned int)val);
         s->int_mask  = val;
         break;
 
-    case 0xc000 ... 0xc003:
+    case 0x7000 ... 0x7003:
         DPRINTF("SCR1 Write: %x\n", (unsigned int)val);
-        s->scr1 = deposit32(s->scr1, (4 - (addr - 0xc000) - size) << 3,
+        s->scr1 = deposit32(s->scr1, (4 - (addr - 0x7000) - size) << 3,
                             size << 3, val);
         break;
 
-    case 0xd000 ... 0xd003:
-        s->scr2 = deposit32(s->scr2, (4 - (addr - 0xd000) - size) << 3,
+    case 0x8000 ... 0x8003:
+        s->scr2 = deposit32(s->scr2, (4 - (addr - 0x8000) - size) << 3,
                             size << 3, val);
         next_scr2_led_update(s);
         next_scr2_rtc_update(s);
@@ -897,7 +897,7 @@ static void next_pc_realize(DeviceState *dev, Error **errp)
     qdev_init_gpio_in(dev, next_irq, NEXT_NUM_IRQS);
 
     memory_region_init_io(&s->mmiomem, OBJECT(s), &next_mmio_ops, s,
-                          "next.mmio", 0xd0000);
+                          "next.mmio", 0x9000);
     memory_region_init_io(&s->scrmem, OBJECT(s), &next_scr_ops, s,
                           "next.scr", 0x20000);
     sysbus_init_mmio(sbd, &s->mmiomem);
@@ -1000,7 +1000,7 @@ static void next_cube_init(MachineState *machine)
     sysbus_create_simple(TYPE_NEXTFB, 0x0B000000, NULL);
 
     /* MMIO */
-    sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02000000);
+    sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02005000);
 
     /* BMAP IO - acts as a catch-all for now */
     sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 1, 0x02100000);
-- 
2.39.5