Simple testcase for validating proper operation of read and write for all three BSC controllers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/481 Signed-off-by: Rayhan Faizel <rayhan.fai...@gmail.com> --- tests/qtest/bcm2835-i2c-test.c | 105 +++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 2 +- 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/bcm2835-i2c-test.c diff --git a/tests/qtest/bcm2835-i2c-test.c b/tests/qtest/bcm2835-i2c-test.c new file mode 100644 index 0000000000..6ec15b8976 --- /dev/null +++ b/tests/qtest/bcm2835-i2c-test.c @@ -0,0 +1,105 @@ +/* + * QTest testcase for Broadcom Serial Controller (BSC) + * + * Copyright (c) 2024 Rayhan Faizel <rayhan.fai...@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#include "hw/i2c/bcm2835_i2c.h" +#include "hw/sensor/tmp105_regs.h" + +static const uint32_t bsc_base_addrs[] = { + 0x3f205000, /* I2C0 */ + 0x3f804000, /* I2C1 */ + 0x3f805000, /* I2C2 */ +}; + +static void bcm2835_i2c_init_transfer(uint32_t base_addr, bool read) +{ + /* read flag is bit 0 so we can write it directly */ + int interrupt = read ? BCM2835_I2C_C_INTR : BCM2835_I2C_C_INTT; + + writel(base_addr + BCM2835_I2C_C, + BCM2835_I2C_C_I2CEN | BCM2835_I2C_C_INTD | + BCM2835_I2C_C_ST | BCM2835_I2C_C_CLEAR | interrupt | read); +} + +static void test_i2c_read_write(gconstpointer data) +{ + uint32_t i2cdata; + intptr_t index = (intptr_t) data; + uint32_t base_addr = bsc_base_addrs[index]; + + /* Write to TMP105 register */ + writel(base_addr + BCM2835_I2C_A, 0x50); + writel(base_addr + BCM2835_I2C_DLEN, 3); + + bcm2835_i2c_init_transfer(base_addr, 0); + + writel(base_addr + BCM2835_I2C_FIFO, TMP105_REG_T_HIGH); + writel(base_addr + BCM2835_I2C_FIFO, 0xde); + writel(base_addr + BCM2835_I2C_FIFO, 0xad); + + + /* Read from TMP105 register */ + writel(base_addr + BCM2835_I2C_A, 0x50); + writel(base_addr + BCM2835_I2C_DLEN, 1); + + bcm2835_i2c_init_transfer(base_addr, 0); + + writel(base_addr + BCM2835_I2C_FIFO, TMP105_REG_T_HIGH); + + writel(base_addr + BCM2835_I2C_DLEN, 2); + bcm2835_i2c_init_transfer(base_addr, 1); + + i2cdata = readl(base_addr + BCM2835_I2C_FIFO); + g_assert_cmpint(i2cdata, ==, 0xde); + + i2cdata = readl(base_addr + BCM2835_I2C_FIFO); + g_assert_cmpint(i2cdata, ==, 0xad); +} + +int main(int argc, char **argv) +{ + int ret; + int i; + + g_test_init(&argc, &argv, NULL); + + for (i = 0; i < 3; i++) { + g_autofree char *test_name = + g_strdup_printf("/bcm2835/bcm2835-i2c%d/read_write", i); + qtest_add_data_func(test_name, (void *)(intptr_t) i, + test_i2c_read_write); + } + + /* Run I2C tests with TMP105 slaves on all three buses */ + qtest_start("-M raspi3b " + "-device tmp105,address=0x50,bus=i2c-bus.0 " + "-device tmp105,address=0x50,bus=i2c-bus.1 " + "-device tmp105,address=0x50,bus=i2c-bus.2"); + ret = g_test_run(); + qtest_end(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index 39557d5ecb..8fe303160e 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -228,7 +228,7 @@ qtests_aarch64 = \ ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_VERSAL') ? ['xlnx-canfd-test', 'xlnx-versal-trng-test'] : []) + \ - (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ + (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test', 'bcm2835-i2c-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ -- 2.34.1
