Signed-off-by: Sergey Kambalin <sergey.kamba...@auriga.com>
---
tests/qtest/bcm2838-mailbox.c | 1 +
tests/qtest/bcm2838-mailbox.h | 88 +++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
index 0928a3dff8..1efd3c628a 100644
--- a/tests/qtest/bcm2838-mailbox.c
+++ b/tests/qtest/bcm2838-mailbox.c
@@ -11,6 +11,7 @@
#include "hw/registerfields.h"
#include "libqtest-single.h"
#include "bcm2838-mailbox.h"
+#include "hw/arm/raspberrypi-fw-defs.h"
REG32(MBOX_EXCHNG_REG, 0)
FIELD(MBOX_EXCHNG_REG, CHANNEL, 0, 4)
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index e9e1f53bc9..9222b38bad 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -7,6 +7,94 @@
* See the COPYING file in the top-level directory.
*/
+#define MBOX0_BASE 0xFE00B880
+#define MBOX1_BASE 0xFE00B8A0
+
+#define MBOX_REG_READ 0x00
+#define MBOX_REG_WRITE 0x00
+#define MBOX_REG_PEEK 0x10
+#define MBOX_REG_SENDER 0x14
+#define MBOX_REG_STATUS 0x18
+#define MBOX_REG_CONFIG 0x1C
+
+#define MBOX_READ_EMPTY 0x40000000
+
+#define MBOX_CHANNEL_ID_PROPERTY 8
+
+#define MBOX_PROCESS_REQUEST 0x00000000
+#define MBOX_SUCCESS 0x80000000
+#define MBOX_ERROR_PARSING_BUFFER 0x80000001
+
+#define BOARD_REVISION 0xB03115
+#define FIRMWARE_REVISION 0x548E1
+#define FIRMWARE_VARIANT 0x77777777 /* TODO: Find the real value */
+
+#define ARM_MEMORY_BASE 0x00000000
+#define ARM_MEMORY_SIZE 0x3c000000
+#define VC_MEMORY_BASE 0x3c000000
+#define VC_MEMORY_SIZE 0x04000000
+#define VC_FB_BASE 0x3c100000
+#define VC_FB_SIZE 0x00096000
+
+#define CLOCK_ID_ROOT 0x00000000
+#define CLOCK_ID_EMMC 0x00000001
+#define CLOCK_ID_UART 0x00000002
+#define CLOCK_ID_ARM 0x00000003
+#define CLOCK_ID_CORE 0x00000004
+#define CLOCK_ID_UNDEFINED 0x12345678
+
+#define CLOCK_RATE_EMMC 50000000
+#define CLOCK_RATE_UART 3000000
+#define CLOCK_RATE_CORE 350000000
+#define CLOCK_RATE_ANY 700000000
+
+#define DEVICE_ID_SD_CARD 0x00000000
+#define DEVICE_ID_UART0 0x00000001
+#define DEVICE_ID_UART1 0x00000002
+#define DEVICE_ID_USB HCD 0x00000003
+#define DEVICE_ID_I2C0 0x00000004
+#define DEVICE_ID_I2C1 0x00000005
+#define DEVICE_ID_I2C2 0x00000006
+#define DEVICE_ID_SPI 0x00000007
+#define DEVICE_ID_CCP2TX 0x00000008
+#define DEVICE_ID_UNKNOWN_0 0x00000009
+#define DEVICE_ID_UNKNOWN_1 0x0000000a
+
+#define TEMPERATURE_ID_SOC 0x00000000
+
+#define TEMPERATURE_SOC 25000
+#define TEMPERATURE_SOC_MAX 99000
+
+#define ALIGN_4K 4096
+
+#define PIXEL_ORDER_BGR 0
+#define PIXEL_ORDER_RGB 1
+
+#define ALPHA_MODE_ENABLED 0
+#define ALPHA_MODE_REVERSED 1
+#define ALPHA_MODE_IGNORED 2
+
+#define GPIO_MASK 0x003c
+
+#define GPIO_0 0x00000080
+
+#define GPIO_DIRECTION_IN 0
+#define GPIO_DIRECTION_OUT 1
+
+#define GPIO_TERMINATION_DISABLED 0
+#define GPIO_TERMINATION_ENABLED 1
+
+#define GPIO_TERMINATION_PULLUP_DISABLED 0
+#define GPIO_TERMINATION_PULLUP_ENABLED 1
+
+#define GPIO_POLARITY_LOW 0
+#define GPIO_POLARITY_HIGH 1
+
+#define GPIO_STATE_DOWN 0
+
+/* Used to test stubs that don't perform actual work */
+#define DUMMY_VALUE 0x12345678
+
typedef struct {
uint32_t size;
uint32_t req_resp_code;
--
2.34.1
