From: Helge Deller <del...@gmx.de> Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware which is built as 32- and 64-bit firmware. The new 64-bit firmware is necessary to fully support 64-bit operating systems (HP-UX, Linux, NetBSD,...). Please review! Helge Helge Deller (13): disas/hppa: Add disassembly for qemu specific instructions target/hppa: Add "diag 0x101" for console output support target/hppa: Fix PSW_W and PSW_E bits in rsm, ssm and mtsm hw/pci-host/astro: Avoid aborting on access failure hw/pci-host/astro: Implement Hard Fail and Soft Fail mode lasi: allow access to LAN MAC address registers target/hppa: Implement do_transaction_failed handler for I/O errors lasi: Add reset I/O ports for LASI audio and FDC target/hppa: Allow read-access to PSW with rsm 0,reg instruction target/hppa: Check privilege only when PSW.P is set target/hppa: PDC_BTLB_INFO uses 32-bit ints target/hppa: Update SeaBIOS-hppa to version 16 hw/hppa/machine: Load 64-bit firmware on 64-bit machines disas/hppa.c | 4 +++ hw/hppa/machine.c | 11 ++++++-- hw/misc/lasi.c | 13 +++++++++ hw/pci-host/astro.c | 41 +++++++++++++++------------ include/hw/misc/lasi.h | 2 ++ include/hw/pci-host/astro.h | 2 ++ pc-bios/hppa-firmware.img | Bin 163324 -> 167836 bytes pc-bios/hppa-firmware64.img | Bin 0 -> 205944 bytes roms/seabios-hppa | 2 +- target/hppa/cpu.c | 1 + target/hppa/cpu.h | 7 +++++ target/hppa/helper.h | 5 +++- target/hppa/mem_helper.c | 21 +++++++++++++- target/hppa/op_helper.c | 32 +++++++++++++++++++++ target/hppa/sys_helper.c | 46 ++++++++++++++++++++++++++++-- target/hppa/translate.c | 54 ++++++++++++++++++++++++++---------- 16 files changed, 200 insertions(+), 41 deletions(-) mode change 100644 => 100755 pc-bios/hppa-firmware.img create mode 100755 pc-bios/hppa-firmware64.img -- 2.43.0