tang peilei wrote: > My phy system is my PC, a computer with ubuntu. > and qemu-system-arm is running in this PC . > > I also use command like you, but I can not find any hard disk info in > qemu's system.(in dmesg's output). > Are you create your disk img with command qemu-img ???
I create my image using "qemu-img create -f qcow ata00.dsk 10G". You could substitute scsi00.dsk for a scsi hard drive though. Sunil
Linux version 2.6.20-versatile ([EMAIL PROTECTED]) (gcc version 4.1.1) #1 Tue Feb 13 01:01:22 GMT 2007 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00003137 Machine: ARM-Versatile PB Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 65536 DMA zone: 512 pages used for memmap DMA zone: 0 pages reserved DMA zone: 65024 pages, LIFO batch:15 Normal zone: 0 pages used for memmap CPU0: D VIVT write-through cache CPU0: I cache: 4096 bytes, associativity 4, 32 byte lines, 32 sets CPU0: D cache: 65536 bytes, associativity 4, 32 byte lines, 512 sets Built 1 zonelists. Total pages: 65024 Kernel command line: ro root=/dev/sda2 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB = 256MB total Memory: 254208KB available (5092K code, 406K data, 104K init) Calibrating delay loop... 153.19 BogoMIPS (lpj=765952) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 PCI core found (slot 11) PCI: bus0: Fast back to back transfers disabled PCI map irq: slot 0, pin 1, devslot 12, irq: 27 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). EFS: 1.0a - http://aeschi.ch.eu.org/efs/ QNX4 filesystem 0.2.3 registered. JFS: nTxBlock = 1986, nTxLock = 15890 SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem BeFS version: 0.9.3 OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered CLCD: unknown LCD panel ID 0x00001000, using VGA CLCD: Versatile hardware, VGA display Clock CLCDCLK: setting VCO reg params: S=1 R=99 V=98 Console: switching to colour frame buffer device 80x30 Serial: AMBA PL011 UART driver dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011 dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011 dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011 fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 38) is a AMBA/PL011 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[EMAIL PROTECTED]> eth0: SMC91C11xFD (rev 1) at d0946000 IRQ 25 [nowait] eth0: Ethernet addr: 52:54:00:12:34:56 eth0: No PHY found PCI: enabling device 0000:00:0c.0 (0140 -> 0143) sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 27 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 0.9. PQ: 0 ANSI: 3 target0:0:0: tagged command queuing enabled, command queue depth 16. target0:0:0: Beginning Domain Validation target0:0:0: Domain Validation skipping write tests target0:0:0: Ending Domain Validation scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 3 target0:0:2: tagged command queuing enabled, command queue depth 16. target0:0:2: Beginning Domain Validation target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation SCSI device sda: 20971520 512-byte hdwr sectors (10737 MB) sda: Write Protect is off sda: Mode Sense: 13 00 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 20971520 512-byte hdwr sectors (10737 MB) sda: Write Protect is off sda: Mode Sense: 13 00 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:2:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:2:0: Attached scsi generic sg1 type 5 SCSI Media Changer driver v0.25 usbmon: debugfs is not available mice: PS/2 mouse device common for all mice input: AT Raw Set 2 keyboard as /class/input/input0 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ALSA device list: No soundcards found. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing init memory: 104K Adding 1044472k swap on /dev/sda4. Priority:-1 extents:1 across:1044472k EXT3 FS on sda2, internal journal input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 eth0: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.8) Clock CLCDCLK: setting VCO reg params: S=1 R=99 V=98 Clock CLCDCLK: setting VCO reg params: S=1 R=99 V=98 eth0: link up eth0: no IPv6 routers present
Disk /dev/sda: 10.7 GB, 10737418240 bytes 64 heads, 32 sectors/track, 10240 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Device Boot Start End Blocks Id System /dev/sda1 1 1025 1049584 83 Linux /dev/sda2 1026 7171 6293504 83 Linux /dev/sda3 7172 9220 2098176 83 Linux /dev/sda4 9221 10240 1044480 82 Linux swap
