I ran a limited test with the new code to see what works. All tests run
with kqemu enabled binary (1.3.0pre9). Host is a laptop w/ pentium 3
mobile processor running ubuntu linux.
deb-sid (2.6.17-1-686 SMP):
qemu -hda deb-sid.qcow -no-kqemu
boots to login prompt
qemu -hda deb-sid.qcow
boots to login prompt
qemu -hda deb-sid.qcow -kernel-kqemu
hangs on boot with:
hda: QEMU HARDDISK, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 6291456 sectors (3221 MB) w/256KiB Cache, CHS=6241/255/63, (U)DMA
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: set_multmode: status=0x41 { DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
... hangs ...
qemu -hda deb-sid.qcow -kernel-kqemu -no-acpi
boots to login prompt
I also tried an old fedora core 5 install iso 'FC-5-i386-disc1.iso'
since it uses a 2.6 kernel:
qemu -cdrom FC-5-i386-disc1.iso -kernel-kqemu
hangs on boot with:
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
hdc: ATAPI 4X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
it will boot appending -no-acpi. For whatever reason the images will
boot with qemu on windows host without problem.
_______________________________________________
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
