Hi,
I'm trying to make qemu build on linux-sparc (Debian port). I've made some
progress and sent the message included below to Debian qemu maintainers. They
are probably too busy with other stuff, so I hope I can get some feedback from
you. Please CC the replies to me since I'm not subscribed to this list.
Thanks,
Jurij Smakov [EMAIL PROTECTED]
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
---------- Forwarded message ----------
Date: Thu, 26 Jan 2006 22:05:11 -0800 (PST)
From: Jurij Smakov <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Some patches for qemu on sparc
found 317145 0.8.0-1
thanks
Hi,
I've started fiddling with qemu 0.8.0-1 on sparc in attempt to make it build.
That's the issues I've encountered so far:
* Current build failure of qemu on sparc buildd was, in part, the buildd's
fault. Due to a misconfiguration it was operating in 64-bit mode, which
should not normally happen. Thanks for Ryan Murray for fixing it in no
time.
* Nevertheless, even in intended 32-bit mode it still fails to build with
the messages:
gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -m32 -ffixed-g1 -ffixed-g2
-ffixed-g3 -ffixed-g6 -fno-delayed-branch -ffixed-i0 -fno-reorder-blocks
-fno-optimize-sibling-calls -I.
-I/home/jurij/tmp/qemu-0.8.0/./target-i386
-I/home/jurij/tmp/qemu-0.8.0/. -I/home/jurij/tmp/qemu-0.8.0/./linux-user
-I/home/jurij/tmp/qemu-0.8.0/./linux-user/i386 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-I/home/jurij/tmp/qemu-0.8.0/./fpu -DHAS_AUDIO
-I/home/jurij/tmp/qemu-0.8.0/./slirp -c -o op.o
/home/jurij/tmp/qemu-0.8.0/./target-i386/op.c
In file included from /home/jurij/tmp/qemu-0.8.0/./target-i386/op.c:736:
/home/jurij/tmp/qemu-0.8.0/./target-i386/ops_template.h: In function
`op_jb_subb':
/home/jurij/tmp/qemu-0.8.0/./target-i386/ops_template.h:278: warning:
implicit declaration of function `GOTO_LABEL_PARAM'
../dyngen -o op.h op.o
dyngen: Found bogus save at the start of op_pavgb_xmm
make[2]: *** [op.h] Error 1
make[2]: Leaving directory `/home/jurij/tmp/qemu-0.8.0/i386-user'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/home/jurij/tmp/qemu-0.8.0'
make: *** [debian/stamp-makefile-build] Error 2
After some googling I was able to find fixes for this problem, mentioned
on the upstream mailing list [0]. For some reason they did not get
included in the current version.
* After applying the patches mentioned there, it proceeds a bit further,
to fail again with the messages:
gcc-3.4 -g -m32 -Wl,-T,/home/jurij/tmp/qemu-0.8.0/./sparc.ld -static -o
qemu-i386 elfload.o main.o syscall.o mmap.o signal.o path.o osdep.o
thunk.o vm86.o libqemu.a gdbstub.o -lm -lrt
/usr/bin/ld: BFD 2.16.91 20060118 Debian GNU/Linux assertion fail
../../bfd/elf.c:3864
/usr/bin/ld: qemu-i386: Not enough room for program headers (allocated 5,
need 6)
/usr/bin/ld: final link failed: Bad value
collect2: ld returned 1 exit status
make[2]: *** [qemu-i386] Error 1
make[2]: Leaving directory `/home/jurij/tmp/qemu-0.8.0/i386-user'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/home/jurij/tmp/qemu-0.8.0'
make: *** [debian/stamp-makefile-build] Error 2
There appears to be no good solution for that kind of problem around.
AFAICT, it's not binutils bug, but rather the problem with the linker
script sparc.ld. It should be fixed somehow, but nobody appears to know
how, so people were just replacing SIZEOF_HEADERS in the linker script
with some reasonably big number [1] :-). Replacing it with 0x400 did fix
the issue.
* That brought me further again, but still no cookie. Now it fails while
building the arm target:
gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -m32 -ffixed-g1 -ffixed-g2
-ffixed-g3 -ffixed-g6 -fno-delayed-branch -ffixed-i0 -fno-reorder-blocks
-fno-optimize-sibling-calls -I. -I/home/jurij/tmp/qemu-0.8.0/./target-arm
-I/home/jurij/tmp/qemu-0.8.0/. -I/home/jurij/tmp/qemu-0.8.0/./linux-user
-I/home/jurij/tmp/qemu-0.8.0/./linux-user/arm -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-I/home/jurij/tmp/qemu-0.8.0/./fpu -I/home/jurij/tmp/qemu-0.8.0/./slirp
-c
-o op.o /home/jurij/tmp/qemu-0.8.0/./target-arm/op.c
../dyngen -o op.h op.o
dyngen: No save at the beginning of op_movl_T0_r0
make[2]: *** [op.h] Error 1
make[2]: Leaving directory `/home/jurij/tmp/qemu-0.8.0/arm-user'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/home/jurij/tmp/qemu-0.8.0'
make: *** [debian/stamp-makefile-build] Error 2
Function op_movl_T0_r0 (and others) in arm-user/op.o indeed does not
contain a save in the beginning. That's how it looks according to
objdump -d arm-user/op.o:
00000000 <op_movl_T0_r0>:
0: c2 01 80 00 ld [ %g6 ], %g1
4: 81 c3 e0 08 retl
8: 01 00 00 00 nop
I have no idea how to fix that one, nor was I able to find anything
relevant on the net (even though I did not look too hard). If you (or
upstream) have any ideas regarding this, please let me know.
Attached patch implements all the changes which got me that far.
[0] http://lists.gnu.org/archive/html/qemu-devel/2005-05/msg00039.html
[1] http://bugs.gentoo.org/show_bug.cgi?id=51078 comment #13
Best regards,
Jurij Smakov [EMAIL PROTECTED]
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CCdiff -aur a/dyngen.c b/dyngen.c
--- a/dyngen.c 2005-12-19 14:51:53.000000000 -0800
+++ b/dyngen.c 2006-01-26 21:30:28.109776664 -0800
@@ -1196,7 +1196,7 @@
} else {
#ifdef HOST_SPARC
if (sym_name[0] == '.')
- snprintf(name, sizeof(name),
+ snprintf(name, name_size,
"(long)(&__dot_%s)",
sym_name + 1);
else
@@ -1451,7 +1451,9 @@
if ((start_insn & ~0x1fff) == 0x9de3a000) {
p_start += 0x4;
start_offset += 0x4;
- if ((int)(start_insn | ~0x1fff) < -128)
+ // if ((int)(start_insn | ~0x1fff) < -128)
+ // Why -128? op_pavgb_xmm adjusts the stack by -0x110 == -272
+ if ((int)(start_insn | ~0x1fff) < -272)
error("Found bogus save at the start of %s", name);
if (end_insn1 != 0x81c7e008 || end_insn2 != 0x81e80000)
error("ret; restore; not found at end of %s", name);
diff -aur a/dyngen-exec.h b/dyngen-exec.h
--- a/dyngen-exec.h 2005-12-19 14:51:53.000000000 -0800
+++ b/dyngen-exec.h 2006-01-26 21:30:18.492238752 -0800
@@ -231,6 +231,8 @@
#ifdef __sparc__
#define EXIT_TB() asm volatile ("jmpl %i0 + 8, %g0\n" \
"nop")
+#define GOTO_LABEL_PARAM(n) asm volatile ( \
+ "set " ASM_NAME(__op_gen_label) #n ", %g1; jmp %g1; nop")
#endif
#ifdef __arm__
#define EXIT_TB() asm volatile ("b exec_loop")
Only in b: dyngen-exec.h.orig
diff -aur a/sparc.ld b/sparc.ld
--- a/sparc.ld 2005-12-19 14:51:53.000000000 -0800
+++ b/sparc.ld 2006-01-26 21:30:45.939066200 -0800
@@ -6,7 +6,7 @@
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
+ . = 0x60000000 + 0x400;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
_______________________________________________
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
