I was trying to get the bridging working (with the help of pbrook and nox- on the irc #qemu channel) and eventually got it working under Sun JDS/3 (Suse 9.1) after adding the bridge-util's rpm.
After some experimentation, I found that once I setup the bridge on my primary interface, (eth0) and I used the qemu-ifup script, the tunnels would automatcially attach to the bridge, and when qemu shuts down, they automatically go away. primary-ifup Code: #!/bin/sh /sbin/brctl addbr br0 /sbin/ifconfig eth0 0.0.0.0 promisc up /sbin/ifconfig eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 up /sbin/brctl stp br0 off /sbin/brctl setfd br0 1 /sbin/brctl sethello br0 1 /sbin/brctl addif br0 eth0 /sbin/route add default gw 192.168.1.1 Then I ran qemu with a "-n ./qemu-ifup" (not the default /etc/qemu-ifup script) and the Damn Small Linux connected to the tun0 interface and got a DHCP address from the LAN's dhcp server. This was pretty exciting, given that I asked a bunch of non-qemu networking questions trying to understand the tunnels and bridges. qemu-ifup #!/bin/sh /sbin/ifconfig $1 0.0.0.0 promisc up /sbin/brctl addif br0 $1 Thanks to pbrook and nox- for helping my find this gem. Now if I could only get bridging to work on Solaris like this. _______________________________________________ Qemu-devel mailing list Qemu-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/qemu-devel
