Hi Gilberto
Many thanks for your reply
Unfortunately, with the message of apply "pci=nocrs", i did and after of the
reboot, i get the same message of errors, so i know that this message is
useless.
Can anybody help me? .... :-(
Best regards
Cesar
----- Original Message -----
From: Gilberto Nunes
To: Cesar Peschiera
Cc: pve-devel@pve.proxmox.com
Sent: Saturday, October 25, 2014 9:53 PM
Subject: Re: [pve-devel] PVE 3.3 with problems of Kernel on Dell R720
Do you try pass this in kernel command line??
pci=nocrs
Try it and report
2014-10-25 22:49 GMT-02:00 Cesar Peschiera <br...@click.com.py>:
Hi
I recently i installed PVE 3.3 (pve-kernel-2.6.32-33-pve: 2.6.32-138) in a
Dell PowerEdge R720, after the install i get these errors in the kern.log file:
Oct 25 17:01:59 kvmtest2 kernel: PCI: Using host bridge windows from ACPI;
if necessary, use "pci=nocrs" and report a bug
Oct 25 17:01:59 kvmtest2 kernel: ipmi_si ipmi_si.0: Could not enable
interrupts, failed set, using polled mode.
Oct 25 17:01:59 kvmtest2 kernel: [Firmware Bug]: No valid trip found
Oct 25 17:01:59 kvmtest2 kernel: ERST: Error Record Serialization Table
(ERST) support is initialized.
Oct 25 17:01:59 kvmtest2 kernel: ehci_hcd 0000:00:1a.0: debug port 2
Oct 25 17:01:59 kvmtest2 kernel: ehci_hcd 0000:00:1d.0: debug port 2
Oct 25 17:01:59 kvmtest2 kernel: ACPI Error: No handler for Region [SYSI]
(ffff884067e2d420) [IPMI] (20090903/evregion-319)
Oct 25 17:01:59 kvmtest2 kernel: ACPI Error: Region IPMI(7) has no handler
(20090903/exfldio-295)
Oct 25 17:01:59 kvmtest2 kernel: ACPI Error (psparse-0537): Method
parse/execution failed [\_SB_.PMI0._GHL] (Node ffff884067e318f8), AE_NOT_EXIST
Oct 25 17:01:59 kvmtest2 kernel: ACPI Error (psparse-0537): Method
parse/execution failed [\_SB_.PMI0._PMC] (Node ffff884067e31998), AE_NOT_EXIST
Oct 25 17:01:59 kvmtest2 kernel: All bugs added by David S. Miller
<da...@redhat.com>
- Firmwares of the Server are with the latest version.
- If I enable a "blacklist power_meter" for the Kernel, i only can reduce
all errors that say "ACPI Error" in the log file.
Can anybody tell me what's going on?, and i should do for amend these
errors?
Best regards
Cesar
_______________________________________________
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
--
--
Gilberto Ferreira
_______________________________________________
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
