>>Already tried this but at least with a 3.10 kernel it does not work. I >>then simply can't reach the target network. As the 102 tagged packages >>gets dropped at the bond.
Yes, it's a known bug. Seem than tagging on interface override tags coming from the vms. I have found a working solution (for 3.10 kernel) with using tagged veth interface (see my other discussion about firewall-network model), I'll send patch todays for test ----- Mail original ----- De: "Stefan Priebe" <s.pri...@profihost.ag> À: "Pablo Ruiz" <pablo.r...@gmail.com> Cc: pve-devel@pve.proxmox.com Envoyé: Jeudi 24 Avril 2014 22:07:17 Objet: Re: [pve-devel] using a vlan on host and guest Am 24.04.2014 22:04, schrieb Pablo Ruiz: > Setup vmbr0.102 as host interface instead of bond0.102. Already tried this but at least with a 3.10 kernel it does not work. I then simply can't reach the target network. As the 102 tagged packages gets dropped at the bond. Stefan > Sent from my iPhone > >> On 24 Apr 2014, at 21:59, Stefan Priebe <s.pri...@profihost.ag> wrote: >> >> Hi, >> >> I've the following config on my host: >> auto bond0 >> iface bond0 inet manual >> slaves eth0 eth1 eth2 >> bond_mode 802.3ad >> >> auto vmbr0 >> iface vmbr0 inet manual >> bridge_ports bond0 >> bridge_stp off >> bridge_fd 0 >> >> auto bond0.102 >> iface bond0.102 inet static >> address 10.255.255.10 >> netmask 255.255.255.0 >> gateway 10.255.255.1 >> >> this works fine as long as i start no vm which has vlan 102 too. >> >> Is this a bug in the PVE network code or my fault? >> >> Greets, >> Stefan >> _______________________________________________ >> pve-devel mailing list >> pve-devel@pve.proxmox.com >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel _______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel _______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
