Am 24.04.2014 22:04, schrieb Pablo Ruiz:
Setup vmbr0.102 as host interface instead of bond0.102.
Already tried this but at least with a 3.10 kernel it does not work. I then simply can't reach the target network. As the 102 tagged packages gets dropped at the bond.
Stefan
Sent from my iPhoneOn 24 Apr 2014, at 21:59, Stefan Priebe <s.pri...@profihost.ag> wrote: Hi, I've the following config on my host: auto bond0 iface bond0 inet manual slaves eth0 eth1 eth2 bond_mode 802.3ad auto vmbr0 iface vmbr0 inet manual bridge_ports bond0 bridge_stp off bridge_fd 0 auto bond0.102 iface bond0.102 inet static address 10.255.255.10 netmask 255.255.255.0 gateway 10.255.255.1 this works fine as long as i start no vm which has vlan 102 too. Is this a bug in the PVE network code or my fault? Greets, Stefan _______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
_______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
