Signed-off-by: Fiona Ebner <f.eb...@proxmox.com>
---
src/PVE/API2/Qemu.pm | 13 ++-
src/PVE/QemuMigrate.pm | 3 +-
src/PVE/QemuServer.pm | 168 +---------------------------
src/PVE/QemuServer/Makefile | 1 +
src/PVE/QemuServer/OVMF.pm | 186 +++++++++++++++++++++++++++++++
src/test/MigrationTest/Shared.pm | 4 +
6 files changed, 207 insertions(+), 168 deletions(-)
create mode 100644 src/PVE/QemuServer/OVMF.pm
diff --git a/src/PVE/API2/Qemu.pm b/src/PVE/API2/Qemu.pm
index ce6f362d..44322db6 100644
--- a/src/PVE/API2/Qemu.pm
+++ b/src/PVE/API2/Qemu.pm
@@ -36,6 +36,7 @@ use PVE::QemuServer::Monitor qw(mon_cmd);
use PVE::QemuServer::Machine;
use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::QemuServer::MetaInfo;
+use PVE::QemuServer::OVMF;
use PVE::QemuServer::PCI;
use PVE::QemuServer::QMPHelpers;
use PVE::QemuServer::RNG;
@@ -540,8 +541,10 @@ my sub create_disks : prototype($$$$$$$$$$$) {
format => $disk->{format},
};
- $dest_info->{efisize} =
PVE::QemuServer::get_efivars_size($conf, $disk)
- if $ds eq 'efidisk0';
+ if ($ds eq 'efidisk0') {
+ $dest_info->{efisize} =
+ PVE::QemuServer::OVMF::get_efivars_size($conf,
$disk);
+ }
eval {
($dst_volid, $size) =
@@ -612,7 +615,7 @@ my sub create_disks : prototype($$$$$$$$$$$) {
"SEV-SNP uses consolidated read-only firmware and does
not require an EFI disk\n"
if $amd_sev_type && $amd_sev_type eq 'snp';
- ($volid, $size) = PVE::QemuServer::create_efidisk(
+ ($volid, $size) = PVE::QemuServer::OVMF::create_efidisk(
$storecfg, $storeid, $vmid, $fmt, $arch, $disk, $smm,
$amd_sev_type,
);
} elsif ($ds eq 'tpmstate0') {
@@ -4455,7 +4458,7 @@ __PACKAGE__->register_method({
format => $format,
};
- $dest_info->{efisize} =
PVE::QemuServer::get_efivars_size($oldconf)
+ $dest_info->{efisize} =
PVE::QemuServer::OVMF::get_efivars_size($oldconf)
if $opt eq 'efidisk0';
my $newdrive = PVE::QemuServer::clone_disk(
@@ -4733,7 +4736,7 @@ __PACKAGE__->register_method({
format => $format,
};
- $dest_info->{efisize} =
PVE::QemuServer::get_efivars_size($conf)
+ $dest_info->{efisize} =
PVE::QemuServer::OVMF::get_efivars_size($conf)
if $disk eq 'efidisk0';
my $newdrive = PVE::QemuServer::clone_disk(
diff --git a/src/PVE/QemuMigrate.pm b/src/PVE/QemuMigrate.pm
index 28d7ac56..9ccaf7e0 100644
--- a/src/PVE/QemuMigrate.pm
+++ b/src/PVE/QemuMigrate.pm
@@ -31,6 +31,7 @@ use PVE::QemuServer::Helpers qw(min_version);
use PVE::QemuServer::Machine;
use PVE::QemuServer::Monitor qw(mon_cmd);
use PVE::QemuServer::Memory qw(get_current_memory);
+use PVE::QemuServer::OVMF;
use PVE::QemuServer::QMPHelpers;
use PVE::QemuServer;
@@ -635,7 +636,7 @@ sub config_update_local_disksizes {
# we want to set the efidisk size in the config to the size of the
# real OVMF_VARS.fd image, else we can create a too big image, which does
not work
if (defined($conf->{efidisk0})) {
- PVE::QemuServer::update_efidisk_size($conf);
+ PVE::QemuServer::OVMF::update_efidisk_size($conf);
}
# TPM state might have an irregular filesize, to avoid problems on transfer
diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
index 63b4d469..719687dc 100644
--- a/src/PVE/QemuServer.pm
+++ b/src/PVE/QemuServer.pm
@@ -56,7 +56,7 @@ use PVE::QemuServer::Helpers
use PVE::QemuServer::Cloudinit;
use PVE::QemuServer::CGroup;
use PVE::QemuServer::CPUConfig
- qw(print_cpu_device get_cpu_options get_cpu_bitness is_native_arch
get_amd_sev_object get_amd_sev_type);
+ qw(print_cpu_device get_cpu_options is_native_arch get_amd_sev_object
get_amd_sev_type);
use PVE::QemuServer::Drive qw(
is_valid_drivename
checked_volume_format
@@ -71,6 +71,7 @@ use PVE::QemuServer::Machine;
use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::QemuServer::MetaInfo;
use PVE::QemuServer::Monitor qw(mon_cmd);
+use PVE::QemuServer::OVMF;
use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr
print_pcie_root_port parse_hostpci);
use PVE::QemuServer::QemuImage;
use PVE::QemuServer::QMPHelpers qw(qemu_deviceadd qemu_devicedel
qemu_objectadd qemu_objectdel);
@@ -98,41 +99,6 @@ my sub vm_is_ha_managed {
return PVE::HA::Config::vm_is_ha_managed($vmid);
}
-my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
-my $OVMF = {
- x86_64 => {
- '4m-no-smm' => [
- "$EDK2_FW_BASE/OVMF_CODE_4M.fd", "$EDK2_FW_BASE/OVMF_VARS_4M.fd",
- ],
- '4m-no-smm-ms' => [
- "$EDK2_FW_BASE/OVMF_CODE_4M.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.ms.fd",
- ],
- '4m' => [
- "$EDK2_FW_BASE/OVMF_CODE_4M.secboot.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.fd",
- ],
- '4m-ms' => [
- "$EDK2_FW_BASE/OVMF_CODE_4M.secboot.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.ms.fd",
- ],
- '4m-sev' => [
- "$EDK2_FW_BASE/OVMF_CVM_CODE_4M.fd",
"$EDK2_FW_BASE/OVMF_CVM_VARS_4M.fd",
- ],
- '4m-snp' => [
- "$EDK2_FW_BASE/OVMF_CVM_4M.fd",
- ],
- # FIXME: These are legacy 2MB-sized images that modern OVMF doesn't
supports to build
- # anymore. how can we deperacate this sanely without breaking existing
instances, or using
- # older backups and snapshot?
- default => [
- "$EDK2_FW_BASE/OVMF_CODE.fd", "$EDK2_FW_BASE/OVMF_VARS.fd",
- ],
- },
- aarch64 => {
- default => [
- "$EDK2_FW_BASE/AAVMF_CODE.fd", "$EDK2_FW_BASE/AAVMF_VARS.fd",
- ],
- },
-};
-
my $cpuinfo = PVE::ProcFSTools::read_cpuinfo();
# Note about locking: we use flock on the config file protect against
concurrent actions.
@@ -3293,36 +3259,6 @@ sub vga_conf_has_spice {
return $1 || 1;
}
-sub get_ovmf_files($$$$) {
- my ($arch, $efidisk, $smm, $amd_sev_type) = @_;
-
- my $types = $OVMF->{$arch}
- or die "no OVMF images known for architecture '$arch'\n";
-
- my $type = 'default';
- if ($arch eq 'x86_64') {
- if ($amd_sev_type && $amd_sev_type eq 'snp') {
- $type = "4m-snp";
- my ($ovmf) = $types->{$type}->@*;
- die "EFI base image '$ovmf' not found\n" if !-f $ovmf;
- return ($ovmf);
- } elsif ($amd_sev_type) {
- $type = "4m-sev";
- } elsif (defined($efidisk->{efitype}) && $efidisk->{efitype} eq '4m') {
- $type = $smm ? "4m" : "4m-no-smm";
- $type .= '-ms' if $efidisk->{'pre-enrolled-keys'};
- } else {
- # TODO: log_warn about use of legacy images for x86_64 with
Promxox VE 9
- }
- }
-
- my ($ovmf_code, $ovmf_vars) = $types->{$type}->@*;
- die "EFI base image '$ovmf_code' not found\n" if !-f $ovmf_code;
- die "EFI vars image '$ovmf_vars' not found\n" if !-f $ovmf_vars;
-
- return ($ovmf_code, $ovmf_vars);
-}
-
# To use query_supported_cpu_flags and query_understood_cpu_flags to get flags
# to use in a QEMU command line (-cpu element), first array_intersect the
result
# of query_supported_ with query_understood_. This is necessary because:
@@ -3464,48 +3400,6 @@ my sub should_disable_smm {
&& $vga->{type} =~ m/^(serial\d+|none)$/;
}
-my sub print_ovmf_drive_commandlines {
- my ($conf, $storecfg, $vmid, $arch, $q35, $version_guard) = @_;
-
- my $d = $conf->{efidisk0} ? parse_drive('efidisk0', $conf->{efidisk0}) :
undef;
-
- my $amd_sev_type = get_amd_sev_type($conf);
- die "Attempting to configure SEV-SNP with pflash devices instead of using
`-bios`\n"
- if $amd_sev_type && $amd_sev_type eq 'snp';
-
- my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch, $d, $q35,
$amd_sev_type);
-
- my $var_drive_str = "if=pflash,unit=1,id=drive-efidisk0";
- if ($d) {
- my ($storeid, $volname) = PVE::Storage::parse_volume_id($d->{file}, 1);
- my ($path, $format) = $d->@{ 'file', 'format' };
- if ($storeid) {
- $path = PVE::Storage::path($storecfg, $d->{file});
- $format //= checked_volume_format($storecfg, $d->{file});
- } elsif (!defined($format)) {
- die "efidisk format must be specified\n";
- }
- # SPI flash does lots of read-modify-write OPs, without writeback this
gets really slow #3329
- if ($path =~ m/^rbd:/) {
- $var_drive_str .= ',cache=writeback';
- $path .= ':rbd_cache_policy=writeback'; # avoid write-around, we
*need* to cache writes too
- }
- $var_drive_str .= ",format=$format,file=$path";
-
- $var_drive_str .= ",size=" . (-s $ovmf_vars)
- if $format eq 'raw' && $version_guard->(4, 1, 2);
- $var_drive_str .= ',readonly=on' if drive_is_read_only($conf, $d);
- } else {
- log_warn("no efidisk configured! Using temporary efivars disk.");
- my $path = "/tmp/$vmid-ovmf.fd";
- PVE::Tools::file_copy($ovmf_vars, $path, -s $ovmf_vars);
- $var_drive_str .= ",format=raw,file=$path";
- $var_drive_str .= ",size=" . (-s $ovmf_vars) if $version_guard->(4, 1,
2);
- }
-
- return ("if=pflash,unit=0,format=raw,readonly=on,file=$ovmf_code",
$var_drive_str);
-}
-
my sub get_vga_properties {
my ($conf, $arch, $machine_version, $winversion) = @_;
@@ -3680,21 +3574,10 @@ sub config_to_command {
}
if ($conf->{bios} && $conf->{bios} eq 'ovmf') {
- die "OVMF (UEFI) BIOS is not supported on 32-bit CPU types\n"
- if !$forcecpu && get_cpu_bitness($conf->{cpu}, $arch) == 32;
-
- my $amd_sev_type = get_amd_sev_type($conf);
- if ($amd_sev_type && $amd_sev_type eq 'snp') {
- if (defined($conf->{efidisk0})) {
- log_warn("EFI disks are not supported with SEV-SNP and will be
ignored");
- }
- push $cmd->@*, '-bios', get_ovmf_files($arch, undef, undef,
$amd_sev_type);
- } else {
- my ($code_drive_str, $var_drive_str) =
- print_ovmf_drive_commandlines($conf, $storecfg, $vmid, $arch,
$q35, $version_guard);
- push $cmd->@*, '-drive', $code_drive_str;
- push $cmd->@*, '-drive', $var_drive_str;
- }
+ my $ovmf_cmd = PVE::QemuServer::OVMF::print_ovmf_commandline(
+ $conf, $storecfg, $vmid, $arch, $q35, $version_guard, $forcecpu,
+ );
+ push $cmd->@*, $ovmf_cmd->@*;
}
if ($q35) { # tell QEMU to load q35 config early
@@ -8853,29 +8736,6 @@ sub qemu_use_old_bios_files {
return ($use_old_bios_files, $machine_type);
}
-sub get_efivars_size {
- my ($conf, $efidisk) = @_;
-
- my $arch = PVE::QemuServer::Helpers::get_vm_arch($conf);
- $efidisk //= $conf->{efidisk0} ? parse_drive('efidisk0',
$conf->{efidisk0}) : undef;
- my $smm = PVE::QemuServer::Machine::machine_type_is_q35($conf);
- my $amd_sev_type = get_amd_sev_type($conf);
- my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm,
$amd_sev_type);
- return -s $ovmf_vars;
-}
-
-sub update_efidisk_size {
- my ($conf) = @_;
-
- return if !defined($conf->{efidisk0});
-
- my $disk = PVE::QemuServer::parse_drive('efidisk0', $conf->{efidisk0});
- $disk->{size} = get_efivars_size($conf);
- $conf->{efidisk0} = print_drive($disk);
-
- return;
-}
-
sub update_tpmstate_size {
my ($conf) = @_;
@@ -8884,22 +8744,6 @@ sub update_tpmstate_size {
$conf->{tpmstate0} = print_drive($disk);
}
-sub create_efidisk($$$$$$$$) {
- my ($storecfg, $storeid, $vmid, $fmt, $arch, $efidisk, $smm,
$amd_sev_type) = @_;
-
- my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm,
$amd_sev_type);
-
- my $vars_size_b = -s $ovmf_vars;
- my $vars_size = PVE::Tools::convert_size($vars_size_b, 'b' => 'kb');
- my $volid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $fmt,
undef, $vars_size);
- PVE::Storage::activate_volumes($storecfg, [$volid]);
-
- PVE::QemuServer::QemuImage::convert($ovmf_vars, $volid, $vars_size_b);
- my $size = PVE::Storage::volume_size_info($storecfg, $volid, 3);
-
- return ($volid, $size / 1024);
-}
-
sub vm_iothreads_list {
my ($vmid) = @_;
diff --git a/src/PVE/QemuServer/Makefile b/src/PVE/QemuServer/Makefile
index a34ec83b..dd6fe505 100644
--- a/src/PVE/QemuServer/Makefile
+++ b/src/PVE/QemuServer/Makefile
@@ -14,6 +14,7 @@ SOURCES=Agent.pm \
Memory.pm \
MetaInfo.pm \
Monitor.pm \
+ OVMF.pm \
PCI.pm \
QemuImage.pm \
QMPHelpers.pm \
diff --git a/src/PVE/QemuServer/OVMF.pm b/src/PVE/QemuServer/OVMF.pm
new file mode 100644
index 00000000..70c626a5
--- /dev/null
+++ b/src/PVE/QemuServer/OVMF.pm
@@ -0,0 +1,186 @@
+package PVE::QemuServer::OVMF;
+
+use strict;
+use warnings;
+
+use PVE::RESTEnvironment qw(log_warn);
+use PVE::Storage;
+use PVE::Tools;
+
+use PVE::QemuServer::Drive qw(checked_volume_format drive_is_read_only
parse_drive print_drive);
+use PVE::QemuServer::CPUConfig qw(get_amd_sev_type get_cpu_bitness);
+use PVE::QemuServer::Helpers;
+use PVE::QemuServer::Machine;
+use PVE::QemuServer::QemuImage;
+
+my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
+my $OVMF = {
+ x86_64 => {
+ '4m-no-smm' => [
+ "$EDK2_FW_BASE/OVMF_CODE_4M.fd", "$EDK2_FW_BASE/OVMF_VARS_4M.fd",
+ ],
+ '4m-no-smm-ms' => [
+ "$EDK2_FW_BASE/OVMF_CODE_4M.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.ms.fd",
+ ],
+ '4m' => [
+ "$EDK2_FW_BASE/OVMF_CODE_4M.secboot.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.fd",
+ ],
+ '4m-ms' => [
+ "$EDK2_FW_BASE/OVMF_CODE_4M.secboot.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.ms.fd",
+ ],
+ '4m-sev' => [
+ "$EDK2_FW_BASE/OVMF_CVM_CODE_4M.fd",
"$EDK2_FW_BASE/OVMF_CVM_VARS_4M.fd",
+ ],
+ '4m-snp' => [
+ "$EDK2_FW_BASE/OVMF_CVM_4M.fd",
+ ],
+ # FIXME: These are legacy 2MB-sized images that modern OVMF doesn't
supports to build
+ # anymore. how can we deperacate this sanely without breaking existing
instances, or using
+ # older backups and snapshot?
+ default => [
+ "$EDK2_FW_BASE/OVMF_CODE.fd", "$EDK2_FW_BASE/OVMF_VARS.fd",
+ ],
+ },
+ aarch64 => {
+ default => [
+ "$EDK2_FW_BASE/AAVMF_CODE.fd", "$EDK2_FW_BASE/AAVMF_VARS.fd",
+ ],
+ },
+};
+
+my sub get_ovmf_files($$$$) {
+ my ($arch, $efidisk, $smm, $amd_sev_type) = @_;
+
+ my $types = $OVMF->{$arch}
+ or die "no OVMF images known for architecture '$arch'\n";
+
+ my $type = 'default';
+ if ($arch eq 'x86_64') {
+ if ($amd_sev_type && $amd_sev_type eq 'snp') {
+ $type = "4m-snp";
+ my ($ovmf) = $types->{$type}->@*;
+ die "EFI base image '$ovmf' not found\n" if !-f $ovmf;
+ return ($ovmf);
+ } elsif ($amd_sev_type) {
+ $type = "4m-sev";
+ } elsif (defined($efidisk->{efitype}) && $efidisk->{efitype} eq '4m') {
+ $type = $smm ? "4m" : "4m-no-smm";
+ $type .= '-ms' if $efidisk->{'pre-enrolled-keys'};
+ } else {
+ # TODO: log_warn about use of legacy images for x86_64 with
Promxox VE 9
+ }
+ }
+
+ my ($ovmf_code, $ovmf_vars) = $types->{$type}->@*;
+ die "EFI base image '$ovmf_code' not found\n" if !-f $ovmf_code;
+ die "EFI vars image '$ovmf_vars' not found\n" if !-f $ovmf_vars;
+
+ return ($ovmf_code, $ovmf_vars);
+}
+
+my sub print_ovmf_drive_commandlines {
+ my ($conf, $storecfg, $vmid, $arch, $q35, $version_guard) = @_;
+
+ my $d = $conf->{efidisk0} ? parse_drive('efidisk0', $conf->{efidisk0}) :
undef;
+
+ my $amd_sev_type = get_amd_sev_type($conf);
+ die "Attempting to configure SEV-SNP with pflash devices instead of using
`-bios`\n"
+ if $amd_sev_type && $amd_sev_type eq 'snp';
+
+ my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch, $d, $q35,
$amd_sev_type);
+
+ my $var_drive_str = "if=pflash,unit=1,id=drive-efidisk0";
+ if ($d) {
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($d->{file}, 1);
+ my ($path, $format) = $d->@{ 'file', 'format' };
+ if ($storeid) {
+ $path = PVE::Storage::path($storecfg, $d->{file});
+ $format //= checked_volume_format($storecfg, $d->{file});
+ } elsif (!defined($format)) {
+ die "efidisk format must be specified\n";
+ }
+ # SPI flash does lots of read-modify-write OPs, without writeback this
gets really slow #3329
+ if ($path =~ m/^rbd:/) {
+ $var_drive_str .= ',cache=writeback';
+ $path .= ':rbd_cache_policy=writeback'; # avoid write-around, we
*need* to cache writes too
+ }
+ $var_drive_str .= ",format=$format,file=$path";
+
+ $var_drive_str .= ",size=" . (-s $ovmf_vars)
+ if $format eq 'raw' && $version_guard->(4, 1, 2);
+ $var_drive_str .= ',readonly=on' if drive_is_read_only($conf, $d);
+ } else {
+ log_warn("no efidisk configured! Using temporary efivars disk.");
+ my $path = "/tmp/$vmid-ovmf.fd";
+ PVE::Tools::file_copy($ovmf_vars, $path, -s $ovmf_vars);
+ $var_drive_str .= ",format=raw,file=$path";
+ $var_drive_str .= ",size=" . (-s $ovmf_vars) if $version_guard->(4, 1,
2);
+ }
+
+ return ("if=pflash,unit=0,format=raw,readonly=on,file=$ovmf_code",
$var_drive_str);
+}
+
+sub get_efivars_size {
+ my ($conf, $efidisk) = @_;
+
+ my $arch = PVE::QemuServer::Helpers::get_vm_arch($conf);
+ $efidisk //= $conf->{efidisk0} ? parse_drive('efidisk0',
$conf->{efidisk0}) : undef;
+ my $smm = PVE::QemuServer::Machine::machine_type_is_q35($conf);
+ my $amd_sev_type = get_amd_sev_type($conf);
+ my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm,
$amd_sev_type);
+ return -s $ovmf_vars;
+}
+
+sub update_efidisk_size {
+ my ($conf) = @_;
+
+ return if !defined($conf->{efidisk0});
+
+ my $disk = parse_drive('efidisk0', $conf->{efidisk0});
+ $disk->{size} = get_efivars_size($conf);
+ $conf->{efidisk0} = print_drive($disk);
+
+ return;
+}
+
+sub create_efidisk($$$$$$$$) {
+ my ($storecfg, $storeid, $vmid, $fmt, $arch, $efidisk, $smm,
$amd_sev_type) = @_;
+
+ my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm,
$amd_sev_type);
+
+ my $vars_size_b = -s $ovmf_vars;
+ my $vars_size = PVE::Tools::convert_size($vars_size_b, 'b' => 'kb');
+ my $volid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $fmt,
undef, $vars_size);
+ PVE::Storage::activate_volumes($storecfg, [$volid]);
+
+ PVE::QemuServer::QemuImage::convert($ovmf_vars, $volid, $vars_size_b);
+ my $size = PVE::Storage::volume_size_info($storecfg, $volid, 3);
+
+ return ($volid, $size / 1024);
+}
+
+sub print_ovmf_commandline {
+ my ($conf, $storecfg, $vmid, $arch, $q35, $version_guard, $forcecpu) = @_;
+
+ my $cmd = [];
+
+ die "OVMF (UEFI) BIOS is not supported on 32-bit CPU types\n"
+ if !$forcecpu && get_cpu_bitness($conf->{cpu}, $arch) == 32;
+
+ my $amd_sev_type = get_amd_sev_type($conf);
+ if ($amd_sev_type && $amd_sev_type eq 'snp') {
+ if (defined($conf->{efidisk0})) {
+ log_warn("EFI disks are not supported with SEV-SNP and will be
ignored");
+ }
+ push $cmd->@*, '-bios', get_ovmf_files($arch, undef, undef,
$amd_sev_type);
+ } else {
+ my ($code_drive_str, $var_drive_str) =
+ print_ovmf_drive_commandlines($conf, $storecfg, $vmid, $arch,
$q35, $version_guard);
+ push $cmd->@*, '-drive', $code_drive_str;
+ push $cmd->@*, '-drive', $var_drive_str;
+ }
+
+ return $cmd;
+}
+
+1;
diff --git a/src/test/MigrationTest/Shared.pm b/src/test/MigrationTest/Shared.pm
index 0b1ac7a0..e29cd1df 100644
--- a/src/test/MigrationTest/Shared.pm
+++ b/src/test/MigrationTest/Shared.pm
@@ -150,6 +150,10 @@ $qemu_server_module->mock(
vm_stop_cleanup => sub {
return;
},
+);
+
+our $qemu_server_ovmf_module = Test::MockModule->new("PVE::QemuServer::OVMF");
+$qemu_server_ovmf_module->mock(
get_efivars_size => sub {
return 128 * 1024;
},
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
