AMD SEV-SNP boots with a single volatile firmware image OVMF.fd via the -bios option.
Currently, an SEV-enabled VM will not boot with an OVMF firmware that was compiled with `SECURE_BOOT_ENABLE` [1]. Furthermore, during testing, SEV-enabled amchines did not boot with `SMM_REQUIRE`. Therefore, introduce a new target build-ovmf-cvm that builds OVMF firmware suitable for AMD SEV. [1] https://github.com/tianocore/edk2/pull/6285 Signed-off-by: Philipp Giersfeld <philipp.giersf...@canarybit.eu> Tested-by: Markus Frank <m.fr...@proxmox.com> --- no changes since last version debian/pve-edk2-firmware-ovmf.install | 3 +++ debian/rules | 35 +++++++++++++++++++++++---- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/debian/pve-edk2-firmware-ovmf.install b/debian/pve-edk2-firmware-ovmf.install index f4c0602..a51846e 100644 --- a/debian/pve-edk2-firmware-ovmf.install +++ b/debian/pve-edk2-firmware-ovmf.install @@ -1,5 +1,8 @@ debian/ovmf-install/OVMF_CODE*.fd /usr/share/pve-edk2-firmware debian/ovmf-install/OVMF_VARS*.fd /usr/share/pve-edk2-firmware +debian/ovmf-cvm-install/OVMF_CVM_CODE*.fd /usr/share/pve-edk2-firmware +debian/ovmf-cvm-install/OVMF_CVM_VARS*.fd /usr/share/pve-edk2-firmware +debian/ovmf-cvm-install/OVMF_CVM_4M.fd /usr/share/pve-edk2-firmware debian/ovmf32-install/OVMF32_CODE*.fd /usr/share/pve-edk2-firmware debian/ovmf32-install/OVMF32_VARS*.fd /usr/share/pve-edk2-firmware debian/PkKek-1-snakeoil.* /usr/share/pve-edk2-firmware diff --git a/debian/rules b/debian/rules index 2e9365b..3959500 100755 --- a/debian/rules +++ b/debian/rules @@ -28,22 +28,24 @@ PCD_FLAGS += --pcd PcdFirmwareReleaseDateString=L"$(PCD_RELEASE_DATE)\\0" COMMON_FLAGS = -DNETWORK_HTTP_BOOT_ENABLE=TRUE COMMON_FLAGS += -DNETWORK_IP6_ENABLE=TRUE COMMON_FLAGS += -DNETWORK_TLS_ENABLE -COMMON_FLAGS += -DSECURE_BOOT_ENABLE=TRUE COMMON_FLAGS += -DPVSCSI_ENABLE=TRUE COMMON_FLAGS += $(PCD_FLAGS) OVMF_COMMON_FLAGS = $(COMMON_FLAGS) OVMF_COMMON_FLAGS += -DTPM2_ENABLE=TRUE -OVMF_4M_FLAGS = $(OVMF_COMMON_FLAGS) -DFD_SIZE_4MB +OVMF_4M_FLAGS = $(OVMF_COMMON_FLAGS) -DFD_SIZE_4MB -DSECURE_BOOT_ENABLE=TRUE OVMF_4M_SMM_FLAGS = $(OVMF_4M_FLAGS) -DSMM_REQUIRE=TRUE -OVMF32_4M_FLAGS = $(OVMF_COMMON_FLAGS) -DFD_SIZE_4MB +OVMF32_4M_FLAGS = $(OVMF_COMMON_FLAGS) -DFD_SIZE_4MB -DSECURE_BOOT_ENABLE=TRUE OVMF32_4M_SMM_FLAGS = $(OVMF32_4M_FLAGS) -DSMM_REQUIRE=TRUE +OVMF_CVM_4M_FLAGS = $(OVMF_COMMON_FLAGS) -DFD_SIZE_4MB AAVMF_FLAGS = $(COMMON_FLAGS) +AAVMF_FLAGS += -DSECURE_BOOT_ENABLE=TRUE AAVMF_FLAGS += -DTPM2_ENABLE=TRUE AAVMF_FLAGS += -DTPM2_CONFIG_ENABLE=TRUE AAVMF_FLAGS += -DCAVIUM_ERRATUM_27456=TRUE RISCV64_FLAGS = $(COMMON_FLAGS) +RISCV64_FLAGS += -DSECURE_BOOT_ENABLE=TRUE # Clear variables used internally by the edk2 build system undefine WORKSPACE @@ -56,7 +58,7 @@ undefine CONF_PATH %: dh $@ -override_dh_auto_build: build-qemu-efi-aarch64 build-ovmf build-ovmf32 build-qemu-efi-riscv64 +override_dh_auto_build: build-qemu-efi-aarch64 build-ovmf build-ovmf32 build-ovmf-cvm build-qemu-efi-riscv64 debian/setup-build-stamp: cp -a debian/Logo.bmp MdeModulePkg/Logo/Logo.bmp @@ -79,6 +81,12 @@ OVMF32_SHELL = $(OVMF32_BUILD_DIR)/IA32/Shell.efi OVMF32_BINARIES = $(OVMF32_SHELL) OVMF32_IMAGES := $(addprefix $(OVMF32_INSTALL_DIR)/,OVMF32_CODE_4M.secboot.fd OVMF32_VARS_4M.fd) +OVMF_CVM_INSTALL_DIR = debian/ovmf-cvm-install +OVMF_CVM_BUILD_DIR = Build/OvmfX64/$(BUILD_TYPE)_$(EDK2_TOOLCHAIN) +OVMF_CVM_SHELL = $(OVMF_CVM_BUILD_DIR)/X64/Shell.efi +OVMF_CVM_BINARIES = $(OVMF_CVM_SHELL) +OVMF_CVM_IMAGES := $(addprefix $(OVMF_CVM_INSTALL_DIR)/,OVMF_CVM_CODE_4M.fd OVMF_CVM_VARS_4M.fd) + QEMU_EFI_BUILD_DIR = Build/ArmVirtQemu-$(EDK2_HOST_ARCH)/$(BUILD_TYPE)_$(EDK2_TOOLCHAIN) AAVMF_BUILD_DIR = Build/ArmVirtQemu-AARCH64/$(BUILD_TYPE)_$(EDK2_TOOLCHAIN) AAVMF_ENROLL = $(AAVMF_BUILD_DIR)/AARCH64/EnrollDefaultKeys.efi @@ -106,6 +114,23 @@ $(OVMF32_BINARIES) $(OVMF32_IMAGES): debian/setup-build-stamp cp $(OVMF32_BUILD_DIR)/FV/OVMF_VARS.fd \ $(OVMF32_INSTALL_DIR)/OVMF32_VARS_4M.fd +build-ovmf-cvm: $(OVMF_CVM_BINARIES) $(OVMF_CVM_IMAGES) +$(OVMF_CVM_BINARIES) $(OVMF_CVM_IMAGES): debian/setup-build-stamp + rm -rf $(OVMF_CVM_INSTALL_DIR) + mkdir $(OVMF_CVM_INSTALL_DIR) + set -e; . ./edksetup.sh; \ + build -a X64 \ + -t $(EDK2_TOOLCHAIN) \ + -p OvmfPkg/OvmfPkgX64.dsc \ + $(OVMF_CVM_4M_FLAGS) -b $(BUILD_TYPE) + #-b $(BUILD_TYPE) + cp $(OVMF_CVM_BUILD_DIR)/FV/OVMF_CODE.fd \ + $(OVMF_CVM_INSTALL_DIR)/OVMF_CVM_CODE_4M.fd + cp $(OVMF_CVM_BUILD_DIR)/FV/OVMF_VARS.fd \ + $(OVMF_CVM_INSTALL_DIR)/OVMF_CVM_VARS_4M.fd + cp $(OVMF_CVM_BUILD_DIR)/FV/OVMF.fd \ + $(OVMF_CVM_INSTALL_DIR)/OVMF_CVM_4M.fd + build-ovmf: $(OVMF_BINARIES) $(OVMF_IMAGES) $(OVMF_PREENROLLED_VARS) $(OVMF_BINARIES) $(OVMF_IMAGES): debian/setup-build-stamp rm -rf $(OVMF_INSTALL_DIR) @@ -250,4 +275,4 @@ get-orig-source: edk2-$(DEB_VERSION_UPSTREAM) rm -rf edk2.tmp edk2-$(DEB_VERSION_UPSTREAM) -.PHONY: build-ovmf build-ovmf32 build-qemu-efi build-qemu-efi-aarch64 build-qemu-efi-riscv64 +.PHONY: build-ovmf build-ovmf32 build-ovmf-cvm build-qemu-efi build-qemu-efi-aarch64 build-qemu-efi-riscv64 \ No newline at end of file -- 2.39.5 _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
